Catalytic urea hydrolysis by composite metal oxide catalyst towards efficient urea-based SCR process: performance evaluation and mechanism investigation

● Bimetallic oxide composite catalyst was designed for the urea-based SCR process. ● Surface chemical state and typical microstructure of catalyst was determined. ● Reaction route was improved based on intermediates and active site identification. ● TiO₂@Al₂O₃ presents an obvious promotion for urea hydrolysis. As a promising option to provide gaseous NH₃ for SCR system, catalytic urea hydrolysis has aroused great attention, and improving surface area and activity of catalysis are the crucial issues to be solved for efficient urea hydrolysis. Therefore, a composite metal oxide (TiO₂@Al₂O₃) catalyst was prepared by a simple hydrothermal method, with mesoporous alumina (γ-Al₂O₃) as substrate. The results verify the mesoporous structure and submicron cluster of TiO₂@Al₂O₃, with exposed crystal faces of (101) and (400) for TiO₂ and γ-Al₂O₃, respectively. The electronegativity difference of Ti⁴⁺ and Al³⁺ changes the charge distribution scheme around the interface, which provides abundant acid/base sites to boost the urea hydrolysis. Consequently, for an optimal proportioning with nano TiO₂ content at 10 wt.%, the hydrolysis efficiency can reach up to 35.2 % at 100 °C in 2 h, increasing by ~7.1 % than that of the blank experiment. ¹³C NMR spectrum measurements provide the impossible intermediate species during urea hydrolysis. Theoretical calculations are performed to clarify the efficient H₂O decomposition at the interface of TiO₂@Al₂O₃. The result offers a favorable technology for energy-efficiency urea hydrolysis.     

Mechanistic insights into the selective photocatalytic degradation of dyes over TiO2/ZSM-11

● TiO₂/ZSM-11 was prepared by a facile solid state dispersion method. ● Mechanism for photocatalytic degradation of dyes was investigated. ● Both experimental and MD simulations were conducted. ● Chemisorption instead of electrostatic interaction played a critical role. Photocatalytic degradation is a promising way to eliminate dye contaminants. In this work, a series of TiO₂/ZSM-11 (TZ) nanocomposites were prepared using a facile solid state dispersion method. Methyl orange (MO), methylene blue (MB), and rhodamine B (RhB) were intentionally chosen as target substrates in the photocatalytic degradation reactions. Compared to pristine TiO₂, negative effect was observed on MO degradation while promoted kinetics were collected on MB and RhB over TZ composites. Moreover, a much higher photocatalytic rate was interestingly achieved on RhB than MB, which indicated that a new factor has to be included other than the widely accepted electrostatic interaction mechanism to fully understand the selective photodegradation reactions. Systematic characterizations showed that TiO₂ and ZSM-11 physically mixed and maintained both the whole framework and local structure without chemical interaction. The different trends observed in surface area and the photo-absorption ability of TZ composites with reaction performance further excluded both as the promotion mechanism. Instead, adsorption energies predicted by molecular dynamics simulations suggested that differences in the adsorption strength played a critical role. This work provided a deep mechanistic understanding of the selective photocatalytic degradation of dyes reactions, which helps to rationally design highly efficient photocatalysts.     

Co-pyrolysis of oil sludge with hydrogen-rich plastics in a vertical stirring reactor: Kinetic analysis,emissions, and products

● Collaborative treatment of plastics and OS was established to improve oil quality. ● PE addition successfully improved OS pyrolysis process by deploying H/C_eff ratio. ● Higher H/C_eff ratio promoted cracking to obtain more gas and light oil fractions. ● The degradation of PE and OS was promoted each other under their temperature range. Pyrolysis is an effective method to treat oily sludge (OS) due to its balance between oil recovery and nonhazardous disposal. However, tank bottom OS contains a high content of heavy fractions, which creates obstacles for pyrolysis due to the high activation energy. The incomplete cracking of macromolecules and secondary polymerization decreases the oil quality and causes coking during the operation process. This study introduced polyethylene (PE) into OS to deploy the H/C_eff ratio of feedstocks for pyrolysis. A strong interaction between OS and PE during copyrolysis could be observed from the TG/DTG curves. PE tightly participated in OS degradation, while OS also promoted PE degradation at high temperature. Apparent pits were generated in solid residues from copyrolysis, which was attributed to the uniform and violent gas release. In addition to HCN, other nitrogenous and sulphurous pollutants were inhibited. Accordingly, more gas products were attained after PE addition with more value-added compositions of alkanes and alkenes. Although the oil yield decreased after PE addition, the oil products from copyrolysis possessed higher heating values and higher contents of light fractions with short chains as well as paraffins. Consequently, copyrolysis of OS and PE significantly improved the pyrolysis process and resulted in high oil quality.     

Electrocatalytic biofilm reactor for effective and energy-efficient azo dye degradation: the synergistic effect of MnOx/Ti flow-through anode and biofilm on the cathode

● MnO _x /Ti flow-through anode was coupled with the biofilm-attached cathode in ECBR. ● ECBR was able to enhance the azo dye removal and reduce the energy consumption. ● Mn^IV=O generated on the electrified MnO _x /Ti anode catalyzed the azo dye oxidation. ● Aerobic heterotrophic bacteria on the cathode degraded azo dye intermediate products. ● Biodegradation of intermediate products was stimulated under the electric field. Dyeing wastewater treatment remains a challenge. Although effective, the in-series process using electrochemical oxidation as the pre- or post-treatment of biodegradation is long. This study proposes a compact dual-chamber electrocatalytic biofilm reactor (ECBR) to complete azo dye decolorization and mineralization in a single unit via anodic oxidation on a MnO_x/Ti flow-through anode followed by cathodic biodegradation on carbon felts. Compared with the electrocatalytic reactor with a stainless-steel cathode (ECR-SS) and the biofilm reactor (BR), the ECBR increased the chemical oxygen demand (COD) removal efficiency by 24 % and 31 % (600 mg/L Acid Orange 7 as the feed, current of 6 mA), respectively. The COD removal efficiency of the ECBR was even higher than the sum of those of ECR-SS and BR. The ECBR also reduced the energy consumption (3.07 kWh/kg COD) by approximately half compared with ECR-SS. The advantages of the ECBR in azo dye removal were attributed to the synergistic effect of the MnO_x/Ti flow-through anode and cathodic biofilms. Catalyzed by Mn^IV=O generated on the MnO_x/Ti anode under a low applied current, azo dyes were oxidized and decolored. The intermediate products with improved biodegradability were further mineralized by the cathodic aerobic heterotrophic bacteria (non-electrochemically active) under the stimulation of the applied current. Taking advantage of the mutual interactions among the electricity, anode, and bacteria, this study provides a novel and compact process for the effective and energy-efficient treatment of azo dye wastewater.     

Effect of Cu-ZSM-5 catalysts with different CuO particle size on selective catalytic oxidation of N,N-Dimethylformamide

● A series of Cu-ZSM-5 catalysts were tested for DMF selective catalytic oxidation. ● Cu-6 nm samples showed the best catalytic activity and N₂ selectivity. ● Redox properties and chemisorbed oxygen impact on DMF catalytic oxidation. ● Isolated Cu²⁺ species and weak acidity have effects on the generation of N₂. N, N-Dimethylformamide (DMF), a nitrogen-containing volatile organic compound (NVOC) with high emissions from the spray industry, has attracted increasing attention. In this study, Cu-ZSM-5 catalysts with different CuO particle sizes of 3, 6, 9 and 12 nm were synthesized and tested for DMF selective catalytic oxidation. The crystal structure and physicochemical properties of the catalyst were studied by various characterization methods. The catalytic activity increases with increasing CuO particle size, and complete conversion can be achieved at 300–350 °C. The Cu-12 nm catalyst has the highest catalytic activity and can achieve complete conversion at 300 °C. The Cu-6 nm sample has the highest N₂ selectivity at lower temperatures, reaching 95% at 300 °C. The activity of the catalysts is determined by the surface CuO cluster species, the bulk CuO species and the chemisorbed surface oxygen species. The high N₂ selectivity of the catalyst is attributed to the ratio of isolated Cu²⁺ and bulk CuO species, and weak acidity is beneficial to the formation of N₂. The results in this work will provide a new design of NVOC catalytic oxidation catalysts.     

Cultivars and oil extraction techniques affect Cd/Pb contents and health risks in oil of rapeseed grown on Cd/Pb-contaminated farmland

● Organic solvent extracted fewer Cd/Pb in rapeseed oil than physical pressing. ● Brassica rapa transferred fewer Cd and Pb from seed to oil than Brassica napus . ● Carcinogenic risk mainly from Cd and worth more concern than noncarcinogenic risk. ● Organic solvent specially SLB pose less heath risk for oil than physical pressing. ● Rapeseed oil posed higher carcinogenic risk for rural residents than urban. Substitute planting with rapeseed offers promise for safely using large areas of Cd/Pb-contaminated farmland. Cd/Pb distributions during rapeseed oil production were investigated and health risks posed by the oil were assessed. Tests were performed using three cultivars (Brassica rapa SYH and ZS100 and Brassica napus QY-1) and four oil extraction techniques (mechanical and low-temperature pressing and n-hexane and subcritical low-temperature butane extraction). The amounts of Cd and Pb in oil were 0.73%–8.44% and 3.14%–11.76%, respectively, of the amounts in rapeseed and were strongly affected by the cultivar and oil extraction technique. The heavy metal (HM) concentrations were lower in solvent-extracted oil (particularly subcritical low-temperature butane extracted oil, in which HMs were not detected) than mechanically pressed oil. The Cd and Pb transfer indices were lower (meaning larger proportions of HMs were retained by the rapeseed meal) for B. rapa than B. napus. This was attributed to a high HM binding protein content of B. rapa seed. Health risks to humans were assessed using a probabilistic risk assessment model. The carcinogenic risk was mainly (97.1%–99.9%) caused by Cd and poses more concern than non-carcinogenic risk. Stronger health risks are posed by mechanically pressed than solvent-extracted oil, and higher carcinogenic risks are posed to people living in rural areas than urban areas. Substitute planting with B. rapa and extracting oil with organic solvent (preferably subcritical low-temperature butane) are optimal for safely utilizing Cd/Pb-contaminated soil. Attention should be paid to the health risks posed by Cd in oil to rural populations.     

Collaborative control of fine particles and ozone required in China for health benefit

● Increased DAAO offsets 3/4 of the decrease of DAAP in 2013–2020. ● DAAO increases are mainly due to O₃ concentration increase and population aging. ● Health benefit from PM_2.5 reduction after 2017 is larger than that before 2017. ● Reducing PM_2.5 concentration by 1% results in 0.6% reduction of DAAP. ● Reducing O₃ concentration by 1% results in 2% reduction of DAAO. PM_2.5 concentration declined significantly nationwide, while O₃ concentration increased in most regions in China in 2013–2020. Recent evidences proved that peak season O₃ is related to increased death risk from non-accidental and respiratory diseases. Based on these new evidences, we estimate excess deaths associated with long-term exposure to ambient PM_2.5 and O₃ in China following the counterfactual analytic framework from Global Burden Disease. Excess deaths from non-accidental diseases associated with long-term exposure to ambient O₃ in China reaches to 579 (95% confidential interval (CI): 93, 990) thousand in 2020, which has been significantly underestimated in previous studies. In addition, the increased excess deaths associated with long-term O₃ exposure (234 (95% CI: 177, 282) thousand) in 2013–2020 offset three quarters of the avoided excess deaths (302 (95% CI: 244, 366) thousand) mainly due to PM_2.5 exposure reduction. In key regions (the North China Plain, the Yangtze River Delta and the Fen-Wei Plain), the former is even larger than the latter, particularly in 2017–2020. Health benefit of PM_2.5 concentration reduction offsets the adverse effects of population growth and aging on excess deaths attributed to PM_2.5 exposure. Increase of excess deaths associated with O₃ exposure is mainly due to the strong increase of O₃ concentration, followed by population aging. Considering the faster population aging process in the future, collaborative control, and faster reduction of PM_2.5 and O₃ are needed to reduce the associated excess deaths.     

Low-temperature caproate production,microbial diversity,and metabolic pathway in xylose anaerobic fermentation

● Converting xylose to caproate under a low temperature of 20 °C by MCF was verified. ● Final concentration of caproate from xylose in a batch reactor reached 1.6 g/L. ● Changing the substrate to ethanol did not notably increase the caproate production. ● Four genera, including Bifidobacterium , were revealed as caproate producers. ● The FAB pathway and incomplete RBO pathway were revealed via metagenomic analysis. Mixed culture fermentation (MCF) is challenged by the unqualified activity of enriched bacteria and unwanted methane dissolution under low temperatures. In this work, caproate production from xylose was investigated by MCF at a low temperature (20 °C). The results showed that a 9 d long hydraulic retention time (HRT) in a continuously stirred tank reactor was necessary for caproate production (~0.3 g/L, equal to 0.6 g COD/L) from xylose (10 g/L). The caproate concentration in the batch mode was further increased to 1.6 g/L. However, changing the substrate to ethanol did not promote caproate production, resulting in ~1.0 g/L after 45 d of operation. Four genera, Bifidobacterium, Caproiciproducens, Actinomyces, and Clostridium_sensu_stricto_12, were identified as the enriched caproate-producing bacteria. The enzymes in the fatty acid biosynthesis (FAB) pathway for caproate production were identified via metagenomic analysis. The enzymes for the conversion of (C_n+2)-2,3-Dehydroxyacyl-CoA to (C_n+2)-Acyl-CoA (i.e., EC 1.3.1.8 and EC 1.3.1.38) in the reverse β-oxidation (RBO) pathway were not identified. These results could extend the understanding of low-temperature caproate production.     

PM2.5 concentration declining saves health expenditure in China

● Monthly hospitalization expenses are sensitive to increases in PM_2.5 exposure. ● The increased PM_2.5 causes patients with CHD and LRI to stay longer in the hospital. ● The impact of PM_2.5 on total expenses for stroke is greater in southern China. ● Males may be more sensitive to air pollution than females. Air pollution has been a severe issue in China. Exposure to PM_2.5 has adverse health effects and causes economic losses. This study investigated the economic impact of exposure to PM_2.5 pollution using monthly city-level data covering 88.5 million urban employees in 2016 and 2017. This study mainly focused on three expenditure indicators to measure the economic impact considering lower respiratory infections (LRIs), coronary heart disease (CHD), and stroke. The results show that a 10 µg/m³ increase in PM_2.5 would cause total monthly expenses of LRIs, CHD, and stroke to increase by 0.226%, 0.237%, and 0.374%, respectively. We also found that LRI, CHD, and stroke hospital admissions increased significantly by 10%, 8.42%, and 5.64%, respectively. Furthermore, the total hospital stays of LRIs, CHDs, and strokes increased by 2.49%, 2. 51%, and 1.64%, respectively. Our findings also suggest heterogeneous impacts of PM_2.5 exposures by sex and across regions, but no statistical evidence shows significant differences between the older and younger adult subgroups. Our results provide several policy implications for reducing unequal public health expenditures in overpolluted countries.     

Evaluating the impact of sulfamethoxazole on hydrogen production during dark anaerobic sludge fermentation

● SMX promotes hydrogen production from dark anaerobic sludge fermentation. ● SMX significantly enhances the hydrolysis and acidification processes. ● SMX suppresses the methanogenesis process in order to reduce hydrogen consumption. ● SMX enhances the relative abundance of hydrogen-VFAs producers. ● SMX brings possible environmental risks due to the enrichment of ARGs. The impact of antibiotics on the environmental protection and sludge treatment fields has been widely studied. The recovery of hydrogen from waste activated sludge (WAS) has become an issue of great interest. Nevertheless, few studies have focused on the impact of antibiotics present in WAS on hydrogen production during dark anaerobic fermentation. To explore the mechanisms, sulfamethoxazole (SMX) was chosen as a representative antibiotic to evaluate how SMX influenced hydrogen production during dark anaerobic fermentation of WAS. The results demonstrated SMX promoted hydrogen production. With increasing additions of SMX from 0 to 500 mg/kg TSS, the cumulative hydrogen production elevated from 8.07 ± 0.37 to 11.89 ± 0.19 mL/g VSS. A modified Gompertz model further verified that both the maximum potential of hydrogen production (P_m) and the maximum rate of hydrogen production (R_m) were promoted. SMX did not affected sludge solubilization, but promoted hydrolysis and acidification processes to produce more hydrogen. Moreover, the methanogenesis process was inhibited so that hydrogen consumption was reduced. Microbial community analysis further demonstrated that the introduction of SMX improved the abundance of hydrolysis bacteria and hydrogen-volatile fatty acids (VFAs) producers. SMX synergistically influenced hydrolysis, acidification and acetogenesis to facilitate the hydrogen production.     

Development of machine learning multi-city model for municipal solid waste generation prediction

● A database of municipal solid waste (MSW) generation in China was established. ● An accurate MSW generation prediction model (WGMod) was constructed. ● Key factors affecting MSW generation were identified. ● MSW trends generation in Beijing and Shenzhen in the near future are projected. Integrated management of municipal solid waste (MSW) is a major environmental challenge encountered by many countries. To support waste treatment/management and national macroeconomic policy development, it is essential to develop a prediction model. With this motivation, a database of MSW generation and feature variables covering 130 cities across China is constructed. Based on the database, advanced machine learning (gradient boost regression tree) algorithm is adopted to build the waste generation prediction model, i.e., WGMod. In the model development process, the main influencing factors on MSW generation are identified by weight analysis. The selected key influencing factors are annual precipitation, population density and annual mean temperature with the weights of 13%, 11% and 10%, respectively. The WGMod shows good performance with R² = 0.939. Model prediction on MSW generation in Beijing and Shenzhen indicates that waste generation in Beijing would increase gradually in the next 3–5 years, while that in Shenzhen would grow rapidly in the next 3 years. The difference between the two is predominately driven by the different trends of population growth.     

Relationship between groundwater cadmium and vicinity resident urine cadmium levels in the non-ferrous metal smelting area,China

● This study systematically examined the relationship between groundwater Cd and UCL. ● The study covered 211 UCL and sociological characteristic from nine groundwater samples. ● We found a significant positive correlation between groundwater Cd and UCL. ● Smoking status and education level also significantly affected UCL. Cadmium (Cd) has received widespread attention owing to its persistent toxicity and non-degradability. Cd in the human body is mainly absorbed from the external environment and is usually assessed using urinary Cd. Hunan Province is the heartland of the Chinese non-ferrous mining area, where several serious Cd pollution events have occurred, including high levels of Cd in the urine of residents. However, the environmental factors influencing high urinary Cd levels (UCLs) in nearby residents remain unclear. Therefore, 211 nearby residents’ UCLs and the corresponding sociological characteristics from nine groundwater samples in this area were analyzed using statistical analysis models. Groundwater Cd concentration ranged from 0.02 to 1.15 μg/L, aligning with class III of the national standard; the range of UCL of nearby residents was 0.37–36.60 μg/L, exceeding the national guideline of 0–2.5 μg/L. Groundwater Cd levels were positively correlated with the UCL (P < 0.001, correlation coefficient 95 % CI = 9.68, R² = 0.06). In addition, sociological characteristics, such as smoking status and education level, also affect UCL. All results indicate that local governments should strengthen the prevention and abatement of groundwater Cd pollution. This study is the first to systematically evaluate the relationship between groundwater Cd and UCL using internal and external environmental exposure data. These findings provide essential bases for relevant departments to reduce Cd exposure in regions where the heavy metal industry is globally prevalent.     

Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.     

Catalytic reduction of water pollutants: knowledge gaps,lessons learned,and new opportunities

● Advances, challenges, and opportunities for catalytic water pollutant reduction. ● Cases of Pd-based catalysts for nitrate, chlorate, and perchlorate reduction. ● New functionalities developed by screening and design of catalytic metal sites. ● Facile catalyst preparation approaches for convenient catalyst optimization. ● Rational design and non-decorative effort are essential for future work. In this paper, we discuss the previous advances, current challenges, and future opportunities for the research of catalytic reduction of water pollutants. We present five case studies on the development of palladium-based catalysts for nitrate, chlorate, and perchlorate reduction with hydrogen gas under ambient conditions. We emphasize the realization of new functionalities through the screening and design of catalytic metal sites, including (i) platinum group metal (PGM) nanoparticles, (ii) the secondary metals for improving the reaction rate and product selectivity of nitrate reduction, (iii) oxygen-atom-transfer metal oxides for chlorate and perchlorate reduction, and (iv) ligand-enhanced coordination complexes for substantial activity enhancement. We also highlight the facile catalyst preparation approach that brought significant convenience to catalyst optimization. Based on our own studies, we then discuss directions of the catalyst research effort that are not immediately necessary or desirable, including (1) systematic study on the downstream aspects of under-developed catalysts, (2) random integration with hot concepts without a clear rationale, and (3) excessive and decorative experiments. We further address some general concerns regarding using H₂ and PGMs in the catalytic system. Finally, we recommend future catalyst development in both “fundamental” and “applied” aspects. The purpose of this perspective is to remove major misconceptions about reductive catalysis research and bring back significant innovations for both scientific advancements and engineering applications to benefit environmental protection.     

Frontier science and challenges on offshore carbon storage

● The main direct seal up carbon options and challenges are reviewed. ● Ocean-based CO₂ replacement for CH₄/oil exploitation is presented. ● Scale-advantage of offshore CCS hub is discussed. Carbon capture and storage (CCS) technology is an imperative, strategic, and constitutive method to considerably reduce anthropogenic CO₂ emissions and alleviate climate change issues. The ocean is the largest active carbon bank and an essential energy source on the Earth’s surface. Compared to oceanic nature-based carbon dioxide removal (CDR), carbon capture from point sources with ocean storage is more appropriate for solving short-term climate change problems. This review focuses on the recent state-of-the-art developments in offshore carbon storage. It first discusses the current status and development prospects of CCS, associated with the challenges and uncertainties of oceanic nature-based CDR. The second section outlines the mechanisms, sites, advantages, and ecologic hazards of direct offshore CO₂ injection. The third section emphasizes the mechanisms, schemes, influencing factors, and recovery efficiency of ocean-based CO₂-CH₄ replacement and CO₂-enhanced oil recovery are reviewed. In addition, this review discusses the economic aspects of offshore CCS and the preponderance of offshore CCS hubs. Finally, the upsides, limitations, and prospects for further investigation of offshore CO₂ storage are presented.     

Effect of ambient polycyclic aromatic hydrocarbons and nicotine on the structure of Aβ42 protein

● B[a]P, nicotine and phenanthrene molecules altered the secondary structure of Aβ₄₂. ● β-content of the peptide was significantly enhanced in the presence of the PAHs. ● Nicotine made stable cluster with Aβ₄₂ peptide via hydrogen bonds. ● Phenanthrene due to its small size, interfered with the Aβ₄₂ monomer more strongly. Recent studies have correlated the chronic impact of ambient environmental pollutants like polycyclic aromatic hydrocarbons (PAHs) with the progression of neurodegenerative disorders, either by using statistical data from various cities, or via tracking biomarkers during in-vivo experiments. Among different neurodegenerative disorders, PAHs are known to cause increased risk for Alzheimer’s disease, related to the development of amyloid beta (Aβ) peptide oligomers. However, the complex molecular interactions between peptide monomers and organic pollutants remains obscured. In this work, we performed an atomistic molecular dynamics study via GROMACS to investigate the structure of Aβ₄₂ peptide monomer in the presence of benzo[a]pyrene, nicotine, and phenanthrene. Interestingly the results revealed strong hydrophobic, and hydrogen-bond based interactions between Aβ peptides and these environmental pollutants that resulted in the formation of stable intermolecular clusters. The strong interactions affected the secondary structure of the Aβ₄₂ peptide in the presence of the organic pollutants, with almost 50 % decrease in the α-helix and 2 %–10 % increase in the β-sheets of the peptide. Overall, the undergoing changes in the secondary structure of the peptide monomer in the presence of the pollutants under the study indicates an enhanced formation of Aβ peptide oligomers, and consequent progression of Alzheimer’s disease.     

A new prediction method of industrial atmospheric pollutant emission intensity based on pollutant emission standard quantification

● Established a quantification method of pollutant emission standard. ● Predicted the SO₂ emission intensity of single coking enterprises in China. ● Evaluated the influence of pollutant discharge standard on prediction accuracy. ● Analyzed the SO₂ emissions of Chinese provincial and municipal coking enterprises. Industrial emissions are the main source of atmospheric pollutants in China. Accurate and reasonable prediction of the emission of atmospheric pollutants from single enterprise can determine the exact source of atmospheric pollutants and control atmospheric pollution precisely. Based on China’s coking enterprises in 2020, we proposed a quantitative method for pollutant emission standards and introduced the quantification results of pollutant emission standards (QRPES) into the construction of support vector regression (SVR) and random forest regression (RFR) prediction methods for SO₂ emission of coking enterprises in China. The results show that, affected by the types of coke ovens and regions, China’s current coking enterprises have implemented a total of 21 emission standards, with marked differences. After adding QRPES, it was found that the root mean squared error (RMSE) of SVR and RFR decreased from 0.055 kt/a and 0.059 kt/a to 0.045 kt/a and 0.039 kt/a, and theR² increased from 0.890 and 0.881 to 0.926 and 0.945, respectively. This shows that the QRPES can greatly improve the prediction accuracy, and the SO₂ emissions of each enterprise are highly correlated with the strictness of standards. The predicted result shows that 45% of SO₂ emissions from Chinese coking enterprises are concentrated in Shanxi, Shaanxi and Hebei provinces in central China. The method created in this paper fills in the blank of forecasting method of air pollutant emission intensity of single enterprise and is of great help to the accurate control of air pollutants.     

Passive convergence-permeable reactive barrier (PC-PRB): An effective configuration to enhance hydraulic performance

● A novel PRB configuration based on passive convergent flow effect was proposed. ● A 2D finite-difference hydrodynamic model, PRB-Flow, was developed. ● PC-PRB can significantly enhance the hydraulic capture capacity of PRB. ● The PRB geometric dimensions and materials cost are effectively reduced. ● The dominant influential factor of the PC-PRB capture width is pipe length, L_p. A novel permeable reactive barrier (PRB) configuration, the so-called passive convergence-permeable reactive barrier (PC-PRB), is proposed to overcome several shortcomings of traditional PRB configurations, such as high dependency to site hydrogeological characteristics and plume size. The PC-PRB is designed to make the plume converge towards the PRB due to the passive hydraulic decompression-convergent flow effect. The corresponding passive groundwater convergence (PC) system is deployed upstream of the PRB system, which consists of passive wells, water pipes, and a buffer layer. A two-dimensional (2D) finite-difference hydrodynamic code, entitled PRB-Flow, is developed to examine the hydraulic performance parameters (i.e., capture width (W) and residence time (t)) of PC-PRB. It is proved that the horizontal 2D capture width (W_h) and vertical 2D capture depth (W_v) of the PC-PRB remarkably increase compared to that of the continuous reactive barrier (C-PRB). The aforementioned relative growth values in order are greater than 50% and 25% in this case study. Therefore, the PRB geometric dimensions as well as the materials cost required for the same plume treatment lessens. The sensitivity analysis reveals that the dominant factors influencing the hydraulic performance of the PC-PRB are the water pipe length (L_p), PRB length (L_PRB), passive well height (H_w), and PRB height (H_PRB). The discrepancy between the W_h of PC-PRB and that of the C-PRB (i.e., ΔW_h) has a low correlation with PRB parameters and mainly depends on L_p, which could dramatically simplify the PC-PRB design procedure. Generally, the proposed PC-PRB exhibits an effective PRB configuration to enhance hydraulic performance.     

Recent advances in special morphologic photocatalysts for NOx removal

● Systematic information of recent progress in photocatalytic NO _x removal is provided. ● The photocatalysts with special morphologies are reviewed and discussed. ● The morphology and photocatalytic NO _x removal performance is related. The significant increase of NO_x concentration causes severe damages to environment and human health. Light-driven photocatalytic technique affords an ideal solution for the removal of NO_x at ambient conditions. To enhance the performance of NO_x removal, 1D, 2D and 3D photocatalysts have been constructed as the light absorption and the separation of charge carriers can be manipulated through controlling the morphology of the photocatalyst. Related works mainly focused on the construction and modification of special morphologic photocatalyst, including element doping, heterostructure constructing, crystal facet exposing, defect sites introducing and so on. Moreover, the excellent performance of the photocatalytic NO_x removal creates great awareness of the application, which has promising practical applications in NO_x removal by paint (removing NO_x indoor and outdoor) and pavement (degrading vehicle exhausts). For these considerations, recent advances in special morphologic photocatalysts for NO_x removal was summarized and commented in this review. The purpose is to provide insights into understanding the relationship between morphology and photocatalytic performance, meanwhile, to promote the application of photocatalytic technology in NO_x degradation.     

Characterization and variation of dissolved organic matter in composting: a critical review

● Effect of composting approaches on dissolved organic matter (DOM). ● Effect of composting conditions on the properties of DOM. ● Character indexes of DOM varied in composting. ● The size, hydrophobicity, humification, and electron transfer capacity increased. ● The hydrophilicity, protein-like materials, and aliphatic components reduced. As the most motive organic fraction in composting, dissolved organic matter (DOM) can contribute to the transfer and dispersal of pollutants and facilitate the global carbon cycle in aquatic ecosystems. However, it is still unclear how composting approaches and conditions influence the properties of compost-derived DOM. Further details on the shift of DOM character indexes are required. In this study, the change in properties of compost-derived DOM at different composting approaches and the effect of composting conditions on the DOM characteristics are summarized. Thereafter, the change in DOM character indexes’ in composting was comprehensively reviewed. Along with composting, the elements and spectral properties (chromophoric DOM (CDOM) and fluorescent DOM (FDOM)) were altered, size and hydrophobicity increased, and aromatic-C and electron transfer capacity were promoted. Finally, some prospects to improve this study were put forward. This paper should facilitate the people who have an interest in tracing the fate of DOM in composting.