Cadmium and lead toxicity and bioaccumulation in Microcystis aeruginosa

The growth of human population leads to intensification of agriculture and promotes, through eutrophication, development of cyanobacteria. One of the most widespread and bloom-forming species in freshwater is toxic Microcystis aeruginosa （M. aeruginosa）. Combustion of fossil fuels and metallurgical processes are the main sources of heavy metals contamination in surface water including cadmium （Cd） and lead （Pb）. The following study was conducted in order to determine the effect of 1- 20 mg. L-1 of Cd and Pb on photochemistry （using flow cytometry） and growth （based on chlorophyll concentra- tion） ofM. aeruginosa as well as to estimate levels of metal bioaccumulation. We have found that 1-10mg.L-1 of Cd and 1-5 rag. L1 of Pb induced continuous enhancement of chlorophyll fluorescence during 24 h of incubation. No significant degradation of chlorophyll was observed in these samples. At higher concentrations of 20 mg. L-1 of Cd and 10-20 mg.L-1 of Pb chlorophyll level significantly decreased and its fluorescence was quenched. M. aeruginosa demonstrated high capability of Cd and Pb bioaccumulation, proportionally to initial metal concentration. In samples with initial concentration of 20 mg. L-1 of Cd and Pb bioaccumulation of 87.3% and 90.1% was observed, respectively. Our study demonstrates that M. aeruginosa can potentially survive in highly metals polluted environments, be a primary source of toxic metals in the food chain and consequently contribute to enhanced toxicity of heavy metals to living organisms including human.     

Effects of in situ biological treatments on heavy metal release of urban river sediment

A typical fiver in Yangzhou City was used to study the effects of artificial aeration, eco-brick cover, biological packing cover, and low-sited plant floating beds on the release of heavy metals from urban river sediments. This work showed that 1） the Cr release rate was decreased by 50.3%-89.6%, with an average of 59.3%, thereby reducing the Cr pollution load to the overlying water by 36.6%-82.7%, with an average of 53.3%; 2） the Zn release rate was reduced by 21.0%-88.9%, with an average of 42.3%, and the Zn pollution load of the overlying water was reduced by 38.0%-67.1%, with an average of 55.0%; 3） the Cu release rate was reduced by 27.5%-91.0%, with an average of 55.3%, and the Cu load of the overlying water was reduced by 57.1%-83.7%, with an average of 71.7%; 4） the Pb release rate was reduced by 11.8%- 79.3%, with an average of 41.2%, and the Pb pollution load of the overlying water was reduced by -1.3%-70.7%, with an average of 29.8%. We also found that the effects of in situ biological treatments on the release of heavy metals were affected by the extent of sediment disturbance. For integrated applications, high-disturbance treatments should be combined with low-disturbance treatments to reduce the explosive release of pollutants caused by sediment disturbance during the treatment operation to achieve better overall treatment effects.     

Removal of Cu（ll） ions from aqueous solution by activated carbon impregnated with humic acid

Humic acid （HA） was impregnated onto powdered activated carbon to improve its Cu（II） adsorption capability. The optimum pH value for Cu（II） removal was 6. The maximum adsorption capacity of HAimpregnated activated carbon was up to 5.98mg.g-1, which is five times the capacity of virgin activated carbon. The adsorption processes were rapid and accompanied by changes in pH. In using a linear method, it was determined that the equilibrium experimental data were better represented by the Langmuir isotherm than by the Freundlich isotherm. Surface charges and surface functional groups were studied through zeta potential and FTIR measurements to explain the mechanism behind the humicacid modification that enhanced the Cu（II） adsorption capacity of activated carbon.     

Reuse of heavy metal-accumulating Cynondon dactylon in remediation of water contaminated by heavy metals

Phytoremediation technology is regarded as a simple and efficient way to remove heavy metals from contaminated soil. A reasonable disposal of metal hyperaccumulators is always and resource-saving. The a major issue in waste reuse heavy metal-accumulating Cynondon dactylon （L.） was investigated where heavy metals were desorbed by a facile acid-treatment. The result indicated that more than 90% of heavy metals （Zn, Pb and Cu） was extracted from Cynondon daetylon with 0.2 mmol· L^-1 HCl. The plant residue was used to adsorb heavy metals ions. The adsorption fitted the Langmuir isotherm model with the saturation adsorption capacity of 9.5 mg·g^-1 Zn^2＋, 36.2 mg·g^-1 Pb2＋ and 12.9 mg·g^-1 Cu^2＋, and the surface eomplexation and the backfilling of heavy metal imprinting cavities existed simultaneously during the adsorption. The treatment of wastewaters indicated that the plant residue exhibited a high removal rate of 97% for Cu. Also, the material could be recycled. The method offers a new disposal approach for heavy metal hyperaccumulator.     

Assessment of metals in dry-toilet collected matters from suburban areas of Ulaanbaatar,Mongolia, using biosolids quality guidelines and potential ecological risk index

Dry-toilet collected matter （DCM） from traditional dry-toilet pits are a potential health and ecological risk in suburban areas. In this study, the characteristics of metals in DCMs from suburban areas of Ulaanbaatar were surveyed. The results indicate that DCMs contain a high percentage of organic matter and nutrients, while heavy metals are at low levels, which shows good agricultural potential. The concentration ranges of Cr, Cu, Hg, Ni, Pb, and Zn were 11±5, 46±9, 0.08±0.05, 9±3, 17±9, and 338±86mg·kg^-1, respectively. The concentration of Cd was below 0.5 mg.kgl, and a high positive relation was shown between chromium and nickel concentrations. The heavy metals in DCMs were safe for land application but Zn in DCMs was close to the effects range median （ERM）, which is toxic in some cases, such as amphipod bioassays. Because it is mandatory to treat DCMs to reduce pathogens, in the case of heavy metal enrichment and agricultural reuse, composting or pyrolysis are better choices than incinera- tion. Compared with global soil background values, the heavy metals in DCMs showed a low level of ecological risk, but a medium level when compared with Mongolian soil background values. The ecological risk of six heavy metals was in the descending order Hg 〉 Cu 〉 Zn 〉 Pb 〉 Ni 〉 Cr and the contribution rate of Hg exceeded 60%.     

Occurrence of odor problems in drinking water of major cities across China

A comprehensive investigation into the occur-rence of odor problem at 111 drinking water treatment plants （DWTPs） in major cities across China was undertaken using both flavor profile analysis （FPA） and gas chromatography-mass spectrometry （GC-MS）. Eighty percent of source water samples exhibited odor problems, characterized by earthy/musty （41%） and swampy/septic （36%） odors, while the occurrence rate was lower （45%） in the finished water. Source water from rivers exhibited more pollution-origin odors, such as the swampy/septic odor, while that from lakes and reservoirs exhibited more algae- origin odors, such as earthy/musty odors. The occurrence rate of 2-methylisoborneol （2-MIB） in the surface source water samples was 75%, with 7% of samples containing 2- MIB concentrations of over 10 ng.L-1. The earthy/musty odor in the lake/reservoir water samples was mainly caused by 2-MIB （linear regression coefficient, R2= 0.69）, while the correlation between 2-MIB concentration and the earthy/musty odor intensity samples was weak （R2= 0.35） in the river-source water These results will be useful for the management of odor-quality problems in drinking water of China.     

Evaluation of endocrine disruption and dioxin-like effects of organic extracts from sewage sludge in autumn in Beijing,China

Study on effective disposal and utilization of sewage sludge has recently been the target of growing interest in China. However, potential risks are associated with the use of sludge due to its contamination with toxic organics, heavy metals and pathogenic microorganisms. In this study, a screening assessment was conducted on sewage sludge samples collected from 17 different sewage treatment plants in Beijing, based on a batch of in vitro bioassays, including a set of recombinant gene yeast assays for endocrine disruption, and an ethoxy resorufin-O- deethylase （EROD） assay using H4IIE cells for aryl hydrocarbon receptor （Ah-R） agonistic activities. Our results suggested that moderate levels of estrogen receptor agonistic activities （0.9 ng E2. g-1 to 6.8 ng E2. gl, dw）, but relative higher androgen receptor antagonistic activ- ities （nd to 45%）, progestin receptor antagonistic activities （nd to 80%） and Ah-R agonistic activities （1390 to 6740 pg 2,3,7,8-tetrachlorodibenzo-p-dioxin （TCDD）·g-1, dw） were found in sewage sludge samples. However, there were no significant correlations between the toxic effects of sewage sludge and the sewage treatment processes. In addition, the 17β-estradiol （E2） equivalent quantity （EEQ） level of the sewage sludge was increased after the composting treatment, whereas the 2,3,7,8-tetrachlorodi- benzo-p-dioxin toxic equivalent quantity （TEQ） level of sewagesludge composted was much lower than that of sewage sludge.     

Nitrogen pollution and source identification of urban ecosystem surface water in Beijing

Nitrogen contamination of surface water is a worldwide environmental problem with intensive agricul- ture and high population densities. We assessed the spatial and seasonal variation in concentrations of total nitrogen and different nitrogen species present in surface-water in Beijing, China. Also, chemical （NO3-N/C1-） and isotopic （615Nnitrate） indicators were used to identify nitrate sources. The results showed that, during 2009 and 2010, nitrate nitrogen concentrations ranged from 0.7 to 7.6 mg· L^-1, ammonium nitrogen from 0. I to 3.4 mg· L^-1, and total nitrogen from 2.4 to 17.0mg· L^-1. Inorganic nitrogen accounted for between 60 and 100% of total nitrogen at the ten monitoring sites. Nitrate nitrogen, ammonium nitrogen, and total nitrogen concentrations at the 2 downstream monitoring sites in south-eastern Beijing were significantly higher than those at the other eight upstream monitoring sites （P 〈 0.01）. Examination of seasonal variation showed that there was a significant inverse relationship between nitrate nitrogen concentrations and precipitation, and that nitrate nitrogen concentrations peaked in the dry seasons. The information given by the 15Nnitrate values and nitrate nitrogen concentrations, combined with the NO3-N/C1- ratio distribution, showed that domestic sewage was the major source of nitrate in Beijing. Methods to control and reduce sewage pollution are urgently needed to help manage surface water quality in Beijing.     

Simultaneous quantification of several classes of antibiotics in water,sediments, and fish muscles by liquid chromatography-tandem mass spectrometry

Precise and sensitive methods for the simultaneous determination of different classes of antibiotics, including sulphonamides, fluoroquinolones, macrolides, tetracyclines, and trimethoprim in surface water, sediments, and fish muscles were developed. In water samples, drugs were extracted with solid-phase extraction （SPE） by passing 1000 mL of water through hydrophilic lipophilic balanced （HLB） SPE cartridges. Sediment samples were solvent-extracted, followed by tandem SPE （strong anion exchange （SAX） ＋ HLB） clean-ups. Fish muscles were extracted by a mixture of acetonitrile and citric buffer （80：20, v/v） solution, and cleaned by SPE. Liquid chromatography-tandem mass spectrometry （LC-MS/ MS） with multiple reaction monitoring （MRM） detection was employed to quantify all compounds. The recoveries for the antibiotics in the spiked water, sediment, and fish samples were 60.2%-95.8%, 48.1%-105.3%, and 59.8%- 103.4%, respectively. The methods were applied to samples taken from Dianchi Lake, China. It showed that concentrations of the detected antibiotics ranged from limits of quantification （LOQ） to 713.6 ng- L1 （ofloxacin） in surface water and from less than LOQ to 344.8 μg·kg-1 （sulphamethoxazole） in sediments. The number of detected antibiotics and the overall antibiotic concentrations were higher in the urban area than the rural area, indicating the probable role of livestock and human activities as important sources of antibiotic contamination. In fish muscles, the concentration of norfioxacin was the highest （up to 38.5 μg·kg-1）, but tetracyclines and macrolides were relatively low. Results showed that the methods were rapid and sensitive, and capable of determining several classes of antibiotics from each of the water, sediment, and fish matrices in a single run.     

Characterization of phosphorus species and modeling for its organic forms in eutrophic shallow lake sediments,North China

Variations of phosphorus （P） and its species in surface sediment of Baiyangdian Lake, a eutrophic shallow lake located in North China, were investigated through combination of field survey and numerical calculation based on cluster analysis. P fractionation was performed by a sequential extraction scheme, categorized as loosely bound P （NH4Cl-P）, reductant soluble P （BD-P）, metallic oxide bound P （NaOH-P）, calcium bound P （HCl-P） and organic P （Org-P）. P concentrations exhibited regional similarities and a total of four sub-areas were identified in which the same rank was HCl-P 〉 Org-P 〉 BD-P ,=NaOH-P 〉NH4Cl-E NH4Cl-P, BD-P and Org-P were found to contribute to P enrichment in overlying water column. Specifically, labile Org-P acted as a potential pool with a greater contribution in aerobic layer compared to anaerobic layer. A hysteresis （lag = 4 months） existed when labile Org-P concentration was negatively correlated with aerobic layer thickness. In view of magnitude of identified P contributors in sub-areas, higher potential of P release was present in Fuhe River and Tang River estuary areas. On the basis of calibration and verification, the mathematical model with parameter settings applied in this study was improved to serve as a tool for limnology management and eutrophic control.     

A red water occurrence in drinking water distribution systems caused by changes in water source in Beijing,China: mechanism analysis and control measures

A red water phenomenon occurred in several communities few days after the change of water source in Beijing, China in 2008. In this study, the origin of this problem, the mechanism of iron release and various control measures were investigated. The results indicated that a significant increase in sulphate concentration as a result of the new water source was the cause of the red water phenomenon. The mechanism of iron release was found that the high-concentration sulphate in the new water source disrupted the stable shell of scale on the inner pipe and led to the release of iron compounds. Experiments showed that the iron release rate in the new source water within pipe section was over 11-fold higher than that occurring within the local source water. The recovery of tap water quality lasted several months despite ameliora- tive measures being implemented, including adding phosphate, reducing the overall proportion of the new water source, elevating the pH and alkalinity, and utilizing free chlorine as a disinfectant instead of chloramine. Adding phosphate was more effective and more practical than the other measures. The iron release rate was decreased after the addition of 1.5 mg. L-1 orthophosphate- P, tripolyphosphate-P and hexametaphosphate-P by 68%, 83% and 87%, respectively. Elevating the pH and alkalinity also reduced the iron release rate by 50%. However, the iron release rate did not decreased after replacing chloramine by 0.5-0.8 mg. L-1 of free chlorine as disinfectant.     

CO2 adsorption performance of ZIF-7 and its endurance in flue gas components

Porous ZIF-7 with the sodalite （SOD） cage structure （ZIF, Zeolitic imidazolate framework） were synthesized by the solvothermal method. Synthesized material was characterized by powder X-ray diffraction （PXRD）, thermal gravity （TG）, scanning electron micro- scopy （SEM） and Na adsorption analysis. ZIF-8 with the SOD structure and a littl larger pore window was synthesized in a similar way and was characterized for comparisons. Thermal stability and structural stability of ZIF-7 were tested through PXRD analysis, and the capability of the material for CO2 capture from simulated flue gas was investigated through physical adsorption method. The results showed that CO： adsorption capacity on ZIF-7 was about 48 mL. gl while the capacity on ZIF-8 was about 18mg.g-1 （at 12C and 0.98 P/Po relative pressure）. Furthermore, the impact of flue gas components on adsorption capacity of ZIF-7 and the selectivity of CO2 against N2 on ZIF-7 was also investigated in this work     

Laboratory study on high-temperature adsorption of HCI by dry-injection of Ca（OH）2 in a dual-layer granular bed filter

Combustion-generated hydrogen chloride （HCl） is considered to be a very hazardous acid gaseous pollutant. This paper presents a laboratory study on the dry adsorption of HCl. The experiments were conducted in a dual-layer granular bed filter, at gas temperatures of 500℃-700℃ and n（Ca）/n（Cl）molar ratios of 1.0-5.0 using the silver nitrate titration method by dry adsorbent powders Ca（OH）2. Mainly, the adsorption efficiency of HCI and utilization efficiency of Calcium were studied, by varying relevant factors including n（Ca）/n（Cl）, tempera- ture, feeding method, water vapor and CO2. With a relatively higher HCl concentration of 1000ppm, the experimental results revealed that 600℃ may be the optimum temperature for HCl adsorption when optimum n （Ca）/n（Cl） was 2.5 in our tests. The results also demonstrated that the feeding at a constant pressure was more effective, and the HCl adsorption efficiency could rapidly reach over 90% with n（Ca）/n（Cl） = 2.5 at 600℃. Furthermore, the HCl adsorption efficiency was found to be slightly promoted by water vapor, while could be impeded by CO2, and the utilization efficiency of calcium could be up to 74.4% without CO2, while was only 36.8% with CO2 when n（Ca）/n（Cl） was 2.5 at 600℃.     

Microalgae Scenedesmus obliquus as renewable biomass feedstock for electricity generation in microbial fuel cells （MFCs）

Renewable algae biomass, Scenedesmus obliquus, was used as substrate for generating electricity in two chamber microbial fuel cells （MFCs）. From polarization test, maximum power density with pretreated algal biomass was 102mW·m^2 （951mW·m^3） at current generation of 276mA·m^-2. The individual electrode potential as a function of current generation suggested that anodic oxidation process of algae substrate had limitation for high current generation in MFC. Total chemical oxygen demand （TCOD） reduction of 74% was obtained when initial TCOD concentration was 534mg · L^-1 for 150 h of operation. The main organic compounds of algae oriented biomass were lactate and acetate, which were mainly used for electricity generation. Other byproducts such as propionate and butyrate were formed at a negligible amount. Electrochemical Impedance Spectroscopy （EIS） analysis pinpointed the charge transfer resistance （112Ω ） of anode electrode, and the exchange current density of anode electrode was 1214 nA·cm^-2.     

A review of atmospheric mercury emissions,pollution and control in China

Mercury, as a global pollutant, has significant impacts on the environment and human health. The current state of atmospheric mercury emissions, pollution and control in China is comprehensively reviewed in this paper. With about 500-800 t of anthropogenic mercury emissions, China contributes 25%-40% to the global mercury emissions. The dominant mercury emission sources in China are coal combustion, non-ferrous metal smelting, cement production and iron and steel production. The mercury emissions from natural sources in China are equivalent to the anthropogenic mercury emissions. The atmospheric mercury concentration in China is about 2-10 times the background level of North Hemisphere. The mercury deposition fluxes in remote areas in China are usually in the range of 10-50μg·m^-2·yr^-1. To reduce mercury emissions, legislations have been enacted for power plants, non-ferrous metal smelters and waste incinerators. Currently mercury contented in the flue gas is mainly removed through existing air pollution control devices for sulfur dioxide, nitrogen oxides, and particles. Dedicated mercury control technologies are required in the future to further mitigate the mercury emissions in China.     

Cation exchange resin supported nanoscale zero-valent iron for removal of phosphorus in rainwater runoff

Self-made cation exchange resin supported nanoscale zero-valent iron （R-nZVI） was used to remove phosphorus in rainwater runoff. 80% of phosphorus in rainwater runoff from grassland was removed with an initial concentration of 0.72 mg. L-1 phosphorus when the dosage of R-nZVl is 8 g per liter rainwater, while only 26% of phosphorus was removed when using cation exchange resin without supported nanoscale zero-valent iron under the same condition. The adsorption capacity of R-nZVI increased up to 185 times of that of the cation exchange resin at a saturated equilibrium phosphorous concentration of 0.42 mg. L-1. Various techniques were implemented to characterize the R-nZVI and explore the mechanism of its removal of phosphate. Scanning electron microscopy （SEM） indicated that new crystal had been formed on the surface of R-nZVI. The result from inductive coupled plasma （ICP） indicated that 2.1% of nZVI was loaded on the support material. The specific surface area was increased after the load of nanoscale zero-valent iron （nZVI）, according to the measurement of BET-N2 method. The result of specific surface area analysis also proved that phosphorus was removed mainly through chemical adsorption process. X-ray photoelectron spectroscopy （XPS） analysis showed that the new product obtained from chemical reaction between phosphate and iron was ferrous phosphate.     

Role of biologic components in a novel floating-bed combining Ipomoea aquatic,Corbicula fluminea and biofilm carrier media

A novel floating-bed incorporated with water spinach （Ipomoea aquatica）, Asiatic clam （Corbicula fluminea）, and carrier media supported biofilm was developed for eutrophic water purification. The contribu- tions of each biologic component to the removals of total nitrogen （TN）, total phosphorus （TP） and Chl.a were examined. The nutrient removals due to the direct uptake by either water spinach or Asiatic clam were less than 10%, suggesting a negligible role of biologic assimilation and leaving the biofilm as the indispensable biologic compo- nent in the floating-bed. Chl.a was reduced mainly by Asiatic clams via filter-feeding. Meanwhile, the digestion and excretion of Asiatic clams benefited the proliferation of nitrifying and denitrifying bacteria, resulting in the improvement of TN removal. In summary, the synergetic effects of water spinach, Asiatic clams and biofilms would promote the eutrophic water treatment performance of floating-bed in comparison with the conventional floating- bed with vegetation as the single biologic component.     

Production of N2O in two biologic nitrogen removal processes: a comparison between conventional and short-cut nitrogen removal processes

The N2O production in two nitrogen removal processes treating domestic wastewater was investigated in laboratory-scale aerobic-anoxic sequencing batch reactors （SBRs）. Results showed that N2O emission happened in the aerobic phase rather than in the anoxic phase. During the aerobic phase, the nitrogen conversion to N2O gas was 27.7% and 36.8% of NH＋-N loss for conventional biologic N-removal process and short-cut biologic N-removal process. The dissolved N2O was reduced to N2 in the anoxic denitrification phase. The N2O production rate increased with the increasing of nitrite concentration and ceased when NH＋-N oxidation was terminated. Higher nitrite accumulation resulted in higher NEO emission in the short-cut nitrogen removal process. Pulse-wise addition of 20 mg NO2 -N. L- 1 gave rise to 3-fold of N2O emission in the conventional N-removal process, while little change happened with 20 mg NOS-N L-1 was added to SBR1.     

Neighborhood form and CO2 emission: evidence from 23 neighborhoods in Jinan, China

To understand the household C02 emission level in China, as well as how much the neighborhoods＇ socio-economic or design factors could influence the CO2 emission, 23 neighborhoods in Jinan were investigated in 2009 and 2010. These neighborhoods fall into four different types： superblock, enclave, grid and traditional. The household CO2 emission includes sources of both in- home energy use and passenger transportation. The average CO2 emission per household is 7.66 t.a^-1, including 6.87 t in-home operational emission and 792 kg transportation emission. The household CO2 emission by neighborhood categories is 10.97, 5.65, 6.49, 5.40 t-household-1. a-1 for superblock, enclave, grid and tradi- tional respectively. Superblock has the highest average emission and also the highest percent （more than 25%） of transportation emission among four different types of neighborhoods. The residential CO2 emission of superb- lock neighborhoods in Jinan has already reached the level in developed countries nearly ten years ago. It is predictable that more superblock neighborhoods would be built in China with the fast urbanization. How to avoid the rapid household CO2 emission growth in the future would be a systematic issue. The study also found that in addition to income and apartment area, household density, land use mix and accessibility to public transportation are three primary factors which have significant impacts on CO2 emission. High density, mixed land use and convenient accessibility to public transportation tend to reduce household CO2 emission.     

Comparisons in subcellular and biochemical behaviors of cadmium between Iow-Cd and high-Cd accumulation cultivars of pakchoi （Brassica chinensis L.）

Subcellular distributions and chemical forms of cadmium （Cd） in the leaves, stems and roots were investigated in low-Cd accumulation cultivars and high-Cd accumulation cultivars ofpakchoi （Brassica chinensis L.）. Root cell wall played a key role in limiting soil Cd from entering the protoplast, especially in the low-Cd cultivars. The high-Cd cultivars had significantly higher leaf and stem Cd concentrations than the low-Cd cultivars in cell wall fraction, chloroplast/trophoplast fraction, organelle fraction and soluble fraction. In low-Cd cultivars, which were more sensitive and thus had greater physiological needs of Cd detoxification than high-Cd cultivars, leaf vacuole sequestrated higher proportions of Cd. Cd in the form of pectate/protein complexes （extracted by 1 tool. L~ NaC1） played a decisive role in Cd translocation from root to shoot, which might be one of the mechanisms that led to the differences in shoot Cd accumulation between the two types of cultivars. Furthermore, the formation of Cd- phosphate complexes （extracted by 2% HAc） was also involved in Cd detoxification within the roots of pakchoi under high Cd stress, suggesting that the mechanisms of Cd detoxification might be different between low- and high-Cd cultivars.