富勒烯的吸附性及其在大气挥发性有机物分析中的应用

富勒烯不含官能团，对挥发性有机物具有化学惰性，能在效地吸附ＶＯＣｓ，吸附ＶＯＣｓ气体后存放稳定，组分流失少，９种ｍｇ．ｌ＾－１级ＶＯＣｓ在富勒烯吸附管上的吸附突破体积为１４．８－４８．０Ｌ．ｇ＾－１，吸附－热脱附回收率在８６．５－１２３％之间。     

南方酸性土壤B层对SO_4~（2－）的吸附特性及其影响因素

研究了砖红壤、赤红壤、红壤、黄壤等土壤的Ｂ层对ＳＯ的吸附特点，并分析其与有关土壤性质的关系。这些土壤的可浸提态ＳＯ含量在０．１ｇ／ｋｇ至０．５ｇ／ｋｇ间，对外加ＳＯ的吸附潜力仅为０．０５ｇ／ｋｇ至０．１ｇ／ｋｇ．用含２５ｍｇ／Ｌ的ＳＯ的溶液持续通过土壤时，它们对ＳＯ的吸附表现为对数曲线方程。降低处理液的ｐＨ值可大大减少土壤对ＳＯ的吸附量。土壤经草酸铵处理后，几乎丧失ＳＯ吸附能力．统计表明，土壤中可浸提态ＳＯ含量及ＳＯ吸附容量与土壤的＜２μｍ粘粘含量、Ｆｅｄ含量、速效磷含量等有显著的相关关系。     

香港大气中有毒挥发性有机物研究

用吸附／热脱除－ＧＣ＝／ＭＳ方法研究了香港不同功能区大气中挥发笥有机物的组成。分析结果表明，香港大气中存在６０多种ＶＯＣＳ，其主要成分是苯系物，烷烃和卤代烃。在检出物中有１７种是有毒挥发性有机物，其主要成分是苯系物和氯代烃。其中氯仿，苯，甲苯，四氯乙烯，三氯乙烯和１，２－二氯乙烷是含量最高的组分。     

苯酚、苯胺及其衍生物对斜生栅列藻的急性毒性及QSAR研究

本文应用ＯＥＣＤ标准方法测定了１８种酚类胺类化合物对斜生栅列藻的４８ｈ－ＥＣ６０值,选择参数ＥＬＵＭＯ和ｌｇＫｏｗ进行了ＱＳＡＲ分析,得到下列回归方程：－１ｇＥＣ５０＝２．５４１－０．６４９ＥＬＵＭＯ＋０．２９９ＬｇＫｏｗ,ｎ＝１８,ｒ＝０．９０３,ＳＥ＝０．３１４应用所得方程计算了化合物的毒性,探讨了毒机理。     

土壤中水溶性有机碳与铜的相互影响

通过向土壤溶液中加入Ｃｕ２＋和可溶性有机碳(ＤＯＣ),研究它们之间的相互作用．结果发现,加入铜可以显著改变土壤水溶性有机碳(ＷＳＯＣ)的吸着平衡,并降低了其水溶性．影响程度在０．８ｍｍｏｌ·ｌ－１Ｃｕ以下随铜浓度的增加而增加．加入０．５ｍｍｏｌ·ｌ－１铜的土壤中 ＷＳＯＳ含量从 ０．２７ｍｇ Ｃ·ｇ－１降至０．０４７ｍｇ Ｃ·ｇ－１,吸着系数从６．６×１０－３ｌ·ｇ－１降至３．３×１０－３ｌ·ｇ－１．另一方面,用Ｆｒｅｕｎｄｌｉｃｈ方程描述铜离子在土壤中的吸附行为(液相浓度单位取ｍｍｏｌ·ｌ－１,固相浓度取ｍｍｏｌ·ｇ－１土),ｋ＝９．ｌ×１０－３;ｎ＝３．４０． 加入ＤＯＣ后,ｋ＝９．２×１０－３;ｎ＝３．６６,没有明显改变土壤对铜的吸附性能．加入小同浓度的ＤＯＣ,结果仍说明该浓度范围内ＤＯＣ(＜８ｍｇ Ｃ·ｌ－１)的加入没有明显改变土壤对铜的吸附性能．     

PACS的结构特征及絮凝性能研究

制备了碱化度及Ａｌ＾３＋／ＳＯ＾２－４摩尔比不同的系列ＰＡＣＳ，分别进行常压（干燥温度１０５℃）及真空干燥（真空度为－０．０９８ＭＰａ、干燥温度６５℃）制备固体产品。用红外光谱及Ｘ－射线衍射谱研究了碱化度、Ａｌ＾３＋／ＳＯ＾２－４摩尔比、干燥温度对ＰＡＣＳ的结构影响，比较了干燥温度不同对ＰＡＣＳ固体样品的溶解度及絮凝效果的影响，借助于显微电泳测定技术研究不同碱化度及不同Ａｌ＾３＋／ＳＯ＾２－４摩尔     

SO2在Co—Mo／AC催化剂上的还原

本文研究了活性焦（ＡＣ）担载Ｃｏ－Ｍｏ催化剂对ＳＯ２还原的催化性能。考查了催化剂不同的预处理方法,Ｈ２／ＳＯ２摩尔比和还原温度对还原过程硫产率的影响,并就硫化后的Ｃｏ－Ｍｏ和活性焦在催化床不同的构成对硫产率的影响进行了研究。结果表明,经硫化后的催化剂在ＳＯ２＋２Ｈ２→Ｓ＋２Ｈ２Ｏ反应有较高的催化活性,在最佳反应温度３００℃,Ｈ／ＳＯ摩尔比为３,空速６０００Ｌ;ｋｇ＾－１．ｈ＾－１条件下,生成硫的产     

链霉菌碱性脂肪酶的研究

从杭州土壤中获得的一支链霉菌,通过ＵＶ、ＤＥＳ和Ｃｏ６０ － γ射线的５ 代诱变,选育成功了高产的Ｚ９４－ ２ 菌株,经过对Ｚ９４ －２ 的发酵研究,产碱性脂肪酶活力达５９６ ｕｍＬ,其最适培养基（λｕ Ｌ－１） 为：糊精１０、黄豆饼粉３０、尿素１０ 、Ｋ２ＨＰＯ４０ ．５、ＭｇＳＯ４·７Ｈ２Ｏ０ ．５、ＮａＣｌ１ 和ＡＥＯ９ ０．５ ,产酶的最适条件为：初始ｐＨ９．０～１０．０ ,２６℃培养４８ ｈ．对Ｚ９４－ ２ 与其他菌株的碱性脂肪酶的特性作了比较     

部分取代苯类在江水中的生物降解与结构相关性研究

测定了２７种取代苯类化合物在松花江江水中的生物降解性．采用量子化学ＭＯＰＡＣ６．０－ＡＭ１法计算了化合物的分子量(ＭＷ)、生成热(Ｈｆ)、分子总表面积(ＴＳＡ)及最高占有轨道能(ＥＨＯＭＯ),结合辛醇/水分配系数ｌｇｐ及酸解离常数ｐＫａ对其中２２种化合物的ＢＯＤ值进行多元线性回归分析,得到如下模型:ＢＯＤ＝１０５．７３－０．４３９ＭＷ－０．０７６Ｈｆ－６．６６０ｌｇＰｎ＝２２,Ｒ２＝０．８２１,ＳＥ＝８．２５０,Ｆ＝２７．５６,Ｐ＝０．０００应用所得模型对其余５个化合物的生物降解性进行了预测．只有一个化合物的相对预测误差大于２０%,为２０．８%．平均预测误差为１２．４%．     

不同消毒剂对水中脊髓灰质炎病毒灭活的比较

将脊髓灰质炎病毒（ Ｐｏｌｉｏ Ｖ） 及不同消毒剂投加到模拟水样中,按不同接触时间１ ,３ ,１０ ,３０ ｍｉｎ 取样,空斑定量． 当模拟水有机质含量 Ｃ Ｏ Ｄ 为２０ ｍｇ／ Ｌ,病毒浓度ｎ（ Ｐ Ｆ Ｕ） ≈１ ×１０５ ｍ Ｌ－ １ 时,分别投加氯制剂有效氯ρ（ Ｃｌ）１６ ｍｇ／ Ｌ,接触３０ ｍｉｎ ;ρ（ Ｃｌ Ｏ２） ＝ ８ ．０ ｍｇ／ Ｌ,３０ ｍｉｎ ; Ｃｌ＋ Ｃｌ Ｏ２ 联合消毒剂（５ ．０ ＋ ５ ．０） ｍｇ／ Ｌ,３０ ｍｉｎ ;ρ（ Ｏ３） ＝ １ ．２２ ｍｇ／ Ｌ,１０ ｍｉｎ 时;可使病毒彻底灭活． 它们使 Ｐｏｌｉｏ Ｖ 达到９９ ．９９ ％ 灭活的浓度时间乘积（ ρ×ｔ） 值分别是６６２ ．５ ,１２９ ．５ ,２００ ．０ 和３ ．２ ｍｇ Ｌ－ １ ｍｉｎ ． 消毒效果（ 顺序） 为 Ｏ３ ＞ Ｃｌ Ｏ２ ＞ Ｃｌ＋ Ｃｌ Ｏ２ ＞ Ｃｌ． 联合消毒灭活 Ｐｏｌｉｏ Ｖ 的效果为 Ｃｌ 的３ ．３ 倍,表明将 Ｃｌ 与 Ｃｌ Ｏ２ 联合应用具有协同效应,优于传统的单一加氯消毒方式     

Chemical poison and regeneration of SCR catalysts for NOx removal from stationary sources

Selective catalytic reduction (SCR) of NO_x with NH₃ is an effective technique to remove NO_x from stationary sources, such as coal-fired power plant and industrial boilers. Some of elements in the fly ash deactivate the catalyst due to strong chemisorptions on the active sites. The poisons may act by simply blocking active sites or alter the adsorption behaviors of reactants and products by an electronic interaction. This review is mainly focused on the chemical poisoning on V₂O₅-based catalysts, environmental-benign catalysts and low temperature catalysts. Several common poisons including alkali/alkaline earth metals, SO₂ and heavy metals etc. are referred and their poisoning mechanisms on catalysts are discussed. The regeneration methods of poisoned catalysts and the development of poison-resistance catalysts are also compared and analyzed. Finally, future research directions in developing poisoning resistance catalysts and facile efficient regeneration methods for SCR catalysts are proposed.     

Cu/Cr co-stabilization mechanisms in a simulated Al2O3-Fe2O3-Cr2O3-CuO waste system

• Cu and Cr can be mostly incorporated into CuFe_xAl_yCr_2−x−yO₄ with a spinel structure. • Spinel phase is the most crucial structure for Cu and Cr co-stabilization. • Compared to Al, Fe and Cr are easier to be incorporated into the spinel structure. • ‘Waste-to-resource’ by thermal process at attainable temperatures can be achieved. Chromium slag usually contains various heavy metals, making its safe treatment difficult. Glass-ceramic sintering has been applied to resolve this issue and emerged as an effective method for metal immobilization by incorporating heavy metals into stable crystal structures. Currently, there is limited knowledge about the reaction pathways adopted by multiple heavy metals and the co-stabilization functions of the crystal structure. To study the Cu/Cr co-stabilization mechanisms during thermal treatment, a simulated system was prepared using a mixture with a molar ratio of Al₂O₃:Fe₂O₃:Cr₂O₃:CuO= 1:1:1:3. The samples were sintered at temperatures 600–1300°C followed by intensive analysis of phase constitutions and microstructure development. A spinel phase (CuFe_xAl_yCr_2−x−yO₄) started to generate at 700°C and the incorporation of Cu/Cr into the spinel largely complete at 900°C, although the spinel peak intensity continued increasing slightly at temperatures above 900°C. Fe₂O₃/Cr₂O₃ was more easily incorporated into the spinel at lower temperatures, while more Al₂O₃ was gradually incorporated into the spinel at higher temperatures. Additionally, sintered sample microstructures became more condensed and smoother with increased sintering temperature. Cu / Cr leachability substantially decreased after Cu/Cr incorporation into the spinel phase at elevated temperatures. At 600°C, the leached ratios for Cu and Cr were 6.28% and 0.65%, respectively. When sintering temperature was increased to 1300°C, the leached ratios for all metal components in the system were below 0.2%. This study proposes a sustainable method for managing Cu/Cr co-exist slag at reasonable temperatures.     

SO2-4/TiO2对SO2-C7H16-TiO2复相光化学反应的影响

研究了TiO2与SO2,C7H16复相光化学反应的光催化活性.在SO2-C7H16-O2-TiO2光催化反应过程中,TiO2表面可形成SO2-4/TiO2结构,它的存在可提高庚烷的光催化氧化速率,利用IR和XPS研究了反应过程中TiO2表面形成的SO2-4/TiO2结构.     

Simultaneous removal of NOx and chlorobenzene on V2O5/TiO2 granular catalyst: Kinetic study and performance prediction

• A V₂O₅/TiO₂ granular catalyst for simultaneous removal of NO and chlorobenzene. • Catalyst synthesized by vanadyl acetylacetonate showed good activity and stability. • The kinetic model was established and the synergetic activity was predicted. • Both chlorobenzene oxidation and SCR of NO follow pseudo-first-order kinetics. • The work is of much value to design of multi-pollutants emission control system. The synergetic abatement of multi-pollutants is one of the development trends of flue gas pollution control technology, which is still in the initial stage and facing many challenges. We developed a V₂O₅/TiO₂ granular catalyst and established the kinetic model for the simultaneous removal of NO and chlorobenzene (i.e., an important precursor of dioxins). The granular catalyst synthesized using vanadyl acetylacetonate precursor showed good synergistic catalytic performance and stability. Although the SCR reaction of NO and the oxidation reaction of chlorobenzene mutually inhibited, the reaction order of each reaction was not considerably affected, and the pseudo-first-order reaction kinetics was still followed. The performance prediction of this work is of much value to the understanding and reasonable design of a catalytic system for multi-pollutants (i.e., NO and dioxins) emission control.     

KMnO4/H2SO4引发制备淀粉改性絮凝剂的研究

以高锰酸钾为引发剂,制备淀粉-丙烯酰胺接枝共聚物.研究酸浓度、引发剂浓度、单体浓度、温度和加料方式对接枝反应的影响.结果表明,少量KMnO4(0.45mmol·l-1)和H2SO4(0.8mmol·l-1)可有效引发淀粉-丙烯酰胺接枝共聚反应,接枝效率达到90%以上,分子量大大提高,对高岭土的絮凝效果较好.     

大气CO2、CH4、CO高精度观测混合标气配制方法

高精度、高准确度的大气CO2、CH4、CO浓度观测需使用以干洁大气为底气的标气.标气中水汽含量及CO2的δ13C对基于光学原理的观测系统有不可忽视的影响.本研究利用自组装的混合标气配制系统,以环境大气为底气,并通过添加高浓度气体或利用吸附剂吸附,调节目标物种浓度.CO2和CO吸附效率分别达99.7%和99.8%,标气水汽含量小于3.7×10-6(物质的量分数,下同),可配制不同浓度范围的CO2、CH4、CO混合标气.在青海瓦里关全球大气本底站配制环境大气浓度范围的标气,CO2、CH4、CO实际配制浓度同目标浓度的偏差小于10×10-6、30×10-9、30×10-9,CO2中δ13C同实际大气接近.本方法配制的标气已应用于我国本底站大气CO2、CH4、CO高精度观测,符合世界气象组织/全球大气观测(WMO/GAW)质量要求.     

食蚊鱼(Gambusia afinis)cat、gapdh和gst基因的克隆及其在生态毒理学中的应用

根据Ensembl、Genbank登录的鱼类cat、gapdh和gst基因的CDS序列设计普通PCR扩增引物,寻找食蚊鱼的cat、gapdh和gst基因的c DNA片段,并根据定量引物设计要求设计出相应的SYBR Green I荧光定量RT-q PCR引物,建立了食蚊鱼cat、gapdh和gst基因的SYBR Green I荧光定量RT-q PCR方法。该方法在104~108数量级范围内有良好线性关系(R=0.999~1.000);熔解曲线显示扩增产物特异性良好,均为单一峰值;质粒标准品最高浓度与最低浓度的批内试验变异系数与批间试验变异系数均低于2%。利用该方法监测和评价环境污染物对水生生物的影响,选择了水体中常见典型药物污染物——双氯芬酸,研究其对食蚊鱼抗氧化基因表达的影响。结果表明,雌性食蚊鱼暴露在不同浓度双氯芬酸钠(0.005、0.05、0.5和5 mg·L-1)24 h后,其肝脏cat、gapdh和gst的mRNA呈现显著变化,相对于对照组,在低浓度0.005 mg·L-1时,cat与gst mRNA的表达量均有极显著上升(p0.01),而其它浓度均极显著下降(p0.01)。试验表明该方法具有快速、精确、灵敏度高的优点,可为利用该类小型鱼类的原位污染物的生物监测和生态毒理评价提供有力的技术支持。     

六铝酸盐负载CuO催化还原NO性能

采用共沉淀法制备了LaAl12O19六铝酸盐载体,采用等体积浸渍法制备了不同负载量的CuO/LaAl12O19催化剂,并对其进行了XRD、H2-TPR和BET表征,考察了催化剂对CH4选择催化还原NO的性能.结果表明,CuO的负载并未改变六铝酸盐载体的结构,Cu在载体上以Cu2+的形式存在,活性组分CuO与载体LaAl12O19之间存在协同作用;CuO/LaAl12O19催化剂对CH4选择催化还原NO表现出良好活性,所制备的催化剂均能使NO的转化率达到99%;其中负载量为1.0 wt%的CuO/LaAl12O19催化剂的活性最好,完全反应温度T99%为560℃,且在80 h稳定性试验中表现出了良好的高温活性和热稳定性.     

Separation/degradation behavior and mechanism for cationic/anionic dyes by Ag-functionalized Fe3O4-PDA core-shell adsorbents

● PDA-Fe₃O₄-Ag was made by hydrothermal and oxidation self-polymerization method. ● PDA-Fe₃O₄-Ag had great magnetic separation performance. ● PDA-Fe₃O₄-Ag had good adsorption and degradation performance for ionic dyes. ● PDA-Fe₃O₄-Ag showed NR and MO degradation potential of 91.2% and 87.5%, respectively. High-performance adsorbents have been well-studied for the removal of organic dye pollutants to promote environment remediation. In this study, an Ag nanoparticle-functionalized Fe₃O₄-PDA nanocomposite adsorbent (PDA-Fe₃O₄-Ag) was synthesized, and the adsorption/separation performance of commonly used cationic and anionic organic dyes by the PDA-Fe₃O₄-Ag adsorbent were assessed. Overall, PDA-Fe₃O₄-Ag exhibited a significantly higher adsorption capacity for cationic dyes compared to anionic dyes, the highest of which was more than 110.0 mg/g (methylene blue (MB)), which was much higher than not only the adsorption capacities of the anionic dyes in this study but also other dye adsorption capacities reported in the literature. The dye adsorption kinetics data fitted well to both the pseudo second-order kinetics model and the Langmuir isotherm model, suggesting a monolayer-chemisorption-dominated adsorption mode. Thermodynamics analysis indicated that the adsorption process was both endothermic and spontaneous. Furthermore, the PDA-Fe₃O₄-Ag adsorbent achieved high photodegradation removal rates of the dyes, especially neutral red (NR) and methyl orange (MO), which were 91.2% and 87.5%, respectively. With the addition of PDA-Fe₃O₄-Ag, the degradation rate constants of NR and MO increased from 0.08 × 10⁻² and 0 min⁻¹ to 2.11 × 10⁻² and 1.73 × 10⁻² min⁻¹, respectively. The high adsorption and photocatalytic degradation performance of the PDA-Fe₃O₄-Ag adsorbent make it an excellent candidate for removing cationic and anionic dyes from the industrial effluents.     

Fe2O3-CeO2-Bi2O3/γ-Al2O3 catalyst in the catalytic wet air oxidation (CWAO) of cationic red GTL under mild reaction conditions

Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃, an environmental friendly material, was investigated. The catalyst exhibited good catalytic performance in the CWAO of cationic red GTL. The apparent activation energy for the reaction was 79 kJ·mol⁻¹. HO₂· and O₂·⁻ appeared as the main reactive species in the reaction. The Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃ catalyst, a novel environmental-friendly material, was used to investigate the catalytic wet air oxidation (CWAO) of cationic red GTL under mild operating conditions in a batch reactor. The catalyst was prepared by wet impregnation, and characterized by special surface area (BET measurement), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃ catalyst exhibited good catalytic activity and stability in the CWAO under atmosphere pressure. The effect of the reaction conditions (catalyst loading, degradation temperature, solution concentration and initial solution pH value) was studied. The result showed that the decolorization efficiency of cationic red GTL was improved with increasing the initial solution pH value and the degradation temperature. The apparent activation energy for the reaction was 79 kJ·mol⁻¹. Hydroperoxy radicals (HO₂·) and superoxide radicals (O₂⁻·) appeared as the main reactive species upon the CWAO of cationic red GTL.