Best waste management programs (BWMPs) for marinas: A case study

Marinas are usually located in coastal waters, but can also be found in lakes and rivers. Due to the activities that take place in marinas various contaminants are discharged. Specific measures have to be taken in order to keep the marina environment clean and healthy. Experiences from developed countries have shown that the most effective way to reduce pollution in marinas is the implementation of waste management programs. To this end, ‘Best Waste Management Programs’ (BWMPs) have been employed in the USA and other countries. However, in developing countries lack of available financial resources and unawareness of the concept of clean marinas may hinder the activities towards the application of BWMPs. The aim of this study is to address BWMPs in general and explain waste sources and disposal methods for marinas and yachting activities. The Kusadasi Setur marina in Turkey is investigated particularly as an example of a marina in a developing country and management measures taken in this marina are evaluated. The various kinds of waste generated in the marina are described and preventive measures against pollution taken in the marina are reviewed. Finally the importance of management programs towards the mitigation of pollution problems is emphasized.     

Toxic substances: Measures and measurements†

The formulation of a sound policy for environmental protection and toxic substances control requires knowledge of the presence and concentration of environmental contaminants. For this reason monitoring programs have been set up in the Netherlands for water, drinking water, and air pollution. The Netherlands system for air pollution, monitoring of the substances SO2, NOχ, CO, O₃ is now fully automated. Some examples will be given to show the acquisition and management and interpretation of air pollution measurements.

Various smaller projects, supported by the Department of Health and Environmental Protection include measurement of indoor air‐contaminants, contaminants in soil and hazardous waste sites, and contaminants in biotic samples such as for instance PCB's in eels and seals and mussels. Moreover a Coordinating Committee regularly collects measurements from various sources in the Netherlands regarding pesticide residues and contaminants in food.

For cost‐effective monitoring the accuracy of the measurements must be chosen with regard to the biological effect concentration of the pollutant. The necessity of proper control measurements to establish background levels and the necessity of ring‐tests to increase interlaboratory reproducibility is discussed. In cost‐effective monitoring the minimum number of measurements, which are necessary to check the effect of environmental protection measures, must be defined through proper sampling.     

Mechanisms controlling the transport and evaporation of human exhaled respiratory droplets containing the severe acute respiratory syndrome coronavirus: a review

Environmental Chemistry Letters - Transmission of the coronavirus disease 2019 is still ongoing despite mass vaccination, lockdowns, and other drastic measures to control the pandemic. This is due...     

Efficient waste and pollution abatements for regions in Japan

This paper computes efficient industrial waste and air pollutants abatements for 47 regions in Japan for the period 1992–2002. The variable-returns-to-scale (VRS) data envelopment analysis (DEA) with a single output (real GDP) and seven inputs (labor, real public capital stock, real private capital stock, industrial waste, sulfur oxide, nitrogen oxide, and soot and dust) is used to compute target wastes of each region for each year. The efficient abatement ratios of each region in each year are obtained by comparing the actual to the target amount of a pollutant. Our major findings are: (1) Most regions in Japan have significant room to reduce their pollution since there is a wide gap between efficient and inefficient regions; (2) For each air pollutant, approximately 25–33% of Japan's prefectures can reduce their output by more than 50% without harming regional GDP, and approximately one-third of prefectures can reduce industrial waste more than 30%; (3) Hokkaido is the least efficient region for all years studied and for all waste and pollutants, and target abatement ratios there drastically worsened in the last two sample years; (4) Tokyo, Saitama, Yamanashi, Shiga, Nara, and Tottori are efficient with respect to each type of industrial waste and pollution throughout the study period; (5) many regions in the bottom quartile with respect to real per capita income have significant room to reduce their waste and pollution output; and (6) many regions where energy-intensive industries dominate produce excessive amounts of waste and air pollution compared to other regions.     

Integral approach to industrial effluent quality control in favour of preventing the Rijeka bay pollution

Abstract

INA‐Petrochemical Industry Omi?alj, Yugoslavia is currently producing low density polyethylene, vinyl chloride monomer and ethylene dichloride.

Because of a potentially great hazard for environmental pollution, particularly by low molecular weight chlorinated hydrocarbons, the company has been putting significant effort into its anti‐pollution programme.

Modern technology, polyfunctional organization and proper control of all waste materials has enabled, thus far, no evident or noticable impact on the environment.

Wastewater treatment from the source to final discharged effluent and environmental control results are described.     

Biofuel production,hydrogen production and water remediation by photocatalysis,biocatalysis and electrocatalysis

The energy crisis and environmental pollution have recently fostered research on efficient methods such as environmental catalysis to produce biofuel and to clean water. Environmental catalysis refers to green catalysts used to breakdown pollutants or produce chemicals without generating undesirable by-products. For example, catalysts derived from waste or inexpensive materials are promising for the circular economy. Here we review environmental photocatalysis, biocatalysis, and electrocatalysis, with focus on catalyst synthesis, structure, and applications. Common catalysts include biomass-derived materials, metal–organic frameworks, non-noble metals nanoparticles, nanocomposites and enzymes. Structure characterization is done by Brunauer–Emmett–Teller isotherm, thermogravimetry, X-ray diffraction and photoelectron spectroscopy. We found that water pollutants can be degraded with an efficiency ranging from 71.7 to 100%, notably by heterogeneous Fenton catalysis. Photocatalysis produced dihydrogen (H₂) with generation rate higher than 100 μmol h⁻¹. Dihydrogen yields ranged from 27 to 88% by methane cracking. Biodiesel production reached 48.6 to 99%.

     

The effects of pricing waste generation: A synthetic control approach

To internalize pollution externalities into household waste generation, Unit Pricing Systems (UPS) have been adopted worldwide. This paper evaluates the causal effects of a UPS on the disposal of municipal solid waste in Trento, Italy. Using a unique panel dataset of monthly waste generation in Italian municipalities, we employ the synthetic control method, which allows us to account for possible time-varying effects of unobservables. Our results show that the policy was effective, with a significant decrease of the priced waste stream, unsorted waste, by 37.5%. This effect seems to be largely driven by behavioral changes towards waste avoidance (−8.6%) and possibly by a smaller increase in recycling (+6.1%). By comparing these results to those obtained by a difference-in-differences approach, we show that failing to account for time-varying effects of unobservables may lead to a mismeasurement of policy effects.     

Did the Clean Air Act cause the remarkable decline in sulfur dioxide concentrations?

Over the last three decades, ambient concentrations of sulfur dioxide (SO₂) air pollution have declined by approximately 80%. This paper tests whether the 1970 Clean Air Act and its subsequent amendments caused this decline. The centerpiece of this legislation is the annual assignment of all counties to SO₂ nonattainment or attainment categories. Polluters face stricter regulations in nonattainment counties. There are two primary findings. First, regulators pay little attention to the statutory selection rule in their assignment of the SO₂ nonattainment designations. Second, SO₂ nonattainment status is associated with modest reductions in SO₂ air pollution, but a null hypothesis of zero effect generally cannot be rejected. This finding holds whether the estimated effect is obtained with linear adjustment or propensity score matching. Overall, the evidence suggests that the nonattainment designation played a minor role in the dramatic reduction of SO₂ concentrations over the last 30 years.     

Circular economy strategies for combating climate change and other environmental issues

Global industrialization and excessive dependence on nonrenewable energy sources have led to an increase in solid waste and climate change, calling for strategies to implement a circular economy in all sectors to reduce carbon emissions by 45% by 2030, and to achieve carbon neutrality by 2050. Here we review circular economy strategies with focus on waste management, climate change, energy, air and water quality, land use, industry, food production, life cycle assessment, and cost-effective routes. We observed that increasing the use of bio-based materials is a challenge in terms of land use and land cover. Carbon removal technologies are actually prohibitively expensive, ranging from 100 to 1200 dollars per ton of carbon dioxide. Politically, only few companies worldwide have set climate change goals. While circular economy strategies can be implemented in various sectors such as industry, waste, energy, buildings, and transportation, life cycle assessment is required to optimize new systems. Overall, we provide a theoretical foundation for a sustainable industrial, agricultural, and commercial future by constructing cost-effective routes to a circular economy.

     

Current scenario and challenges of plastic pollution in Bangladesh: a focus on farmlands and terrestrial ecosystems

● A global snapshot of plastic waste generation and disposal is analysed. ● Effect of plastic pollution on environment and terrestrial ecosystem is reviewed. ● Ecotoxicity and food security from plastic pollution is discussed. Plastic is considered one of the most indispensable commodities in our daily life. At the end of life, the huge ever-growing pile of plastic waste (PW) causes serious concerns for our environment, including agricultural farmlands, groundwater quality, marine and land ecosystems, food toxicity and human health hazards. Lack of proper infrastructure, financial backup, and technological advancement turn this hazardous waste plastic management into a serious threat to developing countries, especially for Bangladesh. A comprehensive review of PW generation and its consequences on environment in both global and Bangladesh contexts is presented. The dispersion routes of PW from different sources in different forms (microplastic, macroplastic, nanoplastic) and its adverse effect on agriculture, marine life and terrestrial ecosystems are illustrated in this work. The key challenges to mitigate PW pollution and tackle down the climate change issue is discussed in this work. Moreover, way forward toward the design and implementation of proper PW management strategies are highlighted in this study.     

Towards a sustainable future: a holistic inquiry of waste management behaviors of Singapore households

ABSTRACT

In 2018, Singapore produced a 7.7 million tonnes of waste, which is a significant amount of waste for a small nation-state. In line with the Sustainable Development Goal (SDGs) targets 11.6 and 12.5 of the 2030 Agenda, which addresses cities’ waste generation and management impacts, we ask the question of why Singapore households are not more proactively engaged in waste minimization, despite the presence of local waste minimization public campaigns. This study is the first known study to comparatively apply and test three major theories – social psychological, social-structural, and sociocultural theories, to explain household waste management behavior in Singapore. A national survey followed by regression analysis of 303 households was conducted. In our findings, we firstly describe current trends in household waste management behaviors. Secondly, we compared each applied theory’s ability to predict households’: (1) reuse and (2) recycling of a variety of household items; and (3) recycling frequency. We obtained partial evidence supporting the role of future-orientedness and environmental identity on householders’ variety reuse and recycling. Social-structural (age cohort x income, education) and situational variables (the convenience thesis), also predicted various waste minimization behaviors. Finally, householders’ knowledge of what is recyclable affected all forms of waste minimization behaviors. In view of the study’s findings, we propose a need for targeted planning and policy interventions for different segments of the Singapore population, and different short- and longer-term measures to initiate and achieve sustained household waste minimization.     

Evaluation of recycling waste materials and by-products in highway construction

SUMMARY

The generation, handling, and safe disposal of waste materials has become a major concern in North America. Approval of facilities for waste processing and proper disposal is becoming more difficult to obtain. Furthermore, there is a growing public awareness of the importance of conserving and preserving our valuable natural resources. This expanding awareness has given rise to the trend towards recycling or reuse of awide variety of solid wastes. Experiences with using waste materials in highway construction can vary considerably, depending on material characteristics, construction processes, and climatic differences. A number of waste materials may be suitable for use in highway construction, but others may not. The objective of this paper is introduced in two tasks. The first is to include a survey of the waste materials and by-products that have been used successfully, or may be used, as materials for highway construction or maintenance work. This also includes determination of the state of practice concerning economic and technical factors for these wastes. The second is to rank these materials based on three criteria: number of uses by State agencies, economic uses and performance aspects.     

Generation of new carbon–carbon and carbon–heteroatom bonds mediated by agro-waste extracts: a review

Agro-waste extracts are considered green solvents since they are easy to handle, readily accessible from natural waste feedstock, biodegradable and recyclable. Therefore, the employment of these extracts in reaction media has emerged as the most useful and eco-friendly alternative in modern organic chemistry. Here, we review recent developments for the generation of new carbon–carbon and carbon–heteroatom bonds mediated by agro-waste extracts. We show that these aqueous extracts have great applicability in several transformations, including condensations, oxidations, multicomponent and coupling reactions. The challenges and advantages on the use of water of agro-waste extracts in synthetic methodologies is also detail.

     

Thermochemical conversion of municipal solid waste into energy and hydrogen: a review

The rising global population is inducing a fast increase in the amount of municipal waste and, in turn, issues of rising cost and environmental pollution. Therefore, alternative treatments such as waste-to-energy should be developed in the context of the circular economy. Here, we review the conversion of municipal solid waste into energy using thermochemical methods such as gasification, combustion, pyrolysis and torrefaction. Energy yield depends on operating conditions and feedstock composition. For instance, torrefaction of municipal waste at 200 °C generates a heating value of 33.01 MJ/kg, while the co-pyrolysis of cereals and peanut waste yields a heating value of 31.44 MJ/kg at 540 °C. Gasification at 800 °C shows higher carbon conversion for plastics, of 94.48%, than for waste wood and grass pellets, of 70–75%. Integrating two or more thermochemical treatments is actually gaining high momentum due to higher energy yield. We also review reforming catalysts to enhance dihydrogen production, such as nickel on support materials such as CaTiO₃, SrTiO₃, BaTiO₃, Al₂O₃, TiO₃, MgO, ZrO₂. Techno-economic analysis, sensitivity analysis and life cycle assessment are discussed.

     

Role of rural solid waste management in non-point source pollution control of Dianchi Lake catchments, China

In recent years, with control of the main municipal and industrial point pollution sources and implementation of cleaning for some inner pollution sources in the water body, the discharge of point source pollution decreased gradually, while non-point source pollution has become increasingly distressing in Dianchi Lake catchments. As one of the major targets in non-point source pollution control, an integrated solid waste controlling strategy combined with a technological solution and management system was proposed and implemented based on the waste disposal situation and characteristics of rural solid waste in the demonstration area. As the key technology in rural solid waste treatment, both centralized plant-scale composting and a dispersed farmer-operated waste treating system showed promise in rendering timely benefits in efficiency, large handling capacity, high quality of the end product, as well as good economic return. Problems encountered during multi-substrates co-composting such as pathogens, high moisture content, asynchronism in the decomposition of different substrates, and low quality of the end product can all be tackled. 92.5% of solid waste was collected in the demonstration area, while the treating and recycling ratio reached 87.9%, which prevented 32.2 t nitrogen and 3.9 t phosphorus per year from entering the water body of Dianchi Lake after implementation of the project.     

Bewertung der Luftqualität in Rheinland-Pflaz mittels verschiedener Luftqualitätsindizes

Goal and Scope

The constant increase of traffic and the rising energy and material consumption both in industry and trade as well as in private households mean a constant challenge to environmental protection and to the air pollution control. With the commencement of the Federal ambient pollution control act in April 1974, the legal basis for the monitoring of air pollution was created. In future, the limit values laid down in the Council Directive 1999/30/EG, 2000/69/EG and 96/62/EG, will be valid. In town and regional planning there is a great demand for a simple index to evaluate the air quality. From the available data of PM₁₀, NO₂, O₃, CO, SO₂, trends of the air quality will be derived.

Methods

The indices LQI and TLQ suggested by Mayer et al. (2002) were calculated for selected stations of the air pollution monitoring network (ZIMEN) in Rhineland-Palatine. All analysis are based on hourly recorded value, Mean values and frequency distributions are used for the interpretation. Furthermore, the characteristics and trends of the indices under different weather conditions were examined and discussed.

Results

The examination figures out that the air pollutions indices at all stations show similar patterns in the period between January 2001 and December 2002. Neither the LQI, nor the TLQ shows an annual variation. Existing variations are mainly controlled by the general weather situation and the air temperature. High values of the indices appear at extremely high or low mean daily air temperature. The absolute value of the air pollution index is determined by local pollution factors.

Outlook and Recommendations

Both indices are well suitable to evaluate the air quality and to assess the effects of state-aided measures for air pollutant control. Therefore, the indices TLQ and LQI should be published as an additional information in the world wide web.     

天津市PM_（2.5）排放源构成分析及防治措施评估

以天津市2010年污染源普查为主要数据源建立天津市大气污染源排放清单,采用MM5/CMAQ模式,以1、4、7、10为各季节代表性月份,模拟研究天津市各季节PM2.5来源构成变化以及＂十二五＂期间天津市大气污染治理重点工程实施对天津市PM2.5空气质量改善的贡献。结果显示,热力供应、工业燃煤及居民生活源是天津市PM2.5污染主要贡献来源。重点工程全部实施完成后,天津市PM2.5空气质量浓度值与2010年相比约有11.5%的下降,对改善天津市空气质量效果显著。     

Repercussions of COVID-19 pandemic on solid waste generation and management strategies

• Implication of COVID-19 on medical waste and MSW generation is studied. • Challenges and effective strategy of solid waste generation is reviewed. • 2.9 million tons of COVID-19 related medical waste has been generated until Sep. 22. • The pandemic has postponed policies related to the reduction of plastic use. • Blockade resulted in a significant drop in waste generation in some regions. It has been over ten months since the beginning of the 2019 coronavirus disease (COVID-2019), and its impact on solid waste management, especially medical waste, is becoming clearer. This study systematically reviews the potential influences of the COVID-19 pandemic on medical waste, personal protection equipment waste and municipal solid waste (MSW), and discusses the corresponding measures and policies of solid waste management in typical countries. The results show that the generation of medical waste from the pandemic increased significantly, with 18%‒425% growth. It is estimated that the daily output of COVID-19 medical waste increased from 200 t/d on Feb. 22 to over 29000 t/d at the end of September 2020 throughout the world. The use of personal protective equipment will continue to grow in the long-term, while the blockade and isolation measures greatly reduced the volume of commercial waste, especially for tourist cities, and part of this waste was transferred to household waste. Residents’ attitudes and behavior toward food waste have changed due to the COVID-19 pandemic. In response to the pandemic, international organizations and several countries have issued new policies and guidelines and adjusted their management strategies for medical waste and MSW treatment. The pandemic has brought specific challenges to the disposal capacity of medical waste worldwide. It has also brought about the stagnation of policies related to the reduction of plastic products and waste recycling. This study will provide some useful information for managers and governmental officials on effective solid waste management during and after the COVID-19 pandemic.     

The viral phoenix: enhanced infectivity and immunity evasion of SARS-CoV-2 variants

SARS-CoV-2 pandemic continues with emergence of new variants of concerns. These variants are fueling the third and fourth waves of pandemic across many nations. Here we describe the new emerging variants of SARS-CoV-2 and why they have enhanced infectivity and possess the ability to evade immunity.