FSILP: fuzzy-stochastic-interval linear programming for supporting municipal solid waste management

Although many studies on municipal solid waste management (MSW management) were conducted under uncertain conditions of fuzzy, stochastic, and interval coexistence, the solution to the conventional linear programming problems of integrating fuzzy method with the other two was inefficient. In this study, a fuzzy-stochastic-interval linear programming (FSILP) method is developed by integrating Nguyen's method with conventional linear programming for supporting municipal solid waste management. The Nguyen's method was used to convert the fuzzy and fuzzy-stochastic linear programming problems into the conventional linear programs, by measuring the attainment values of fuzzy numbers and/or fuzzy random variables, as well as superiority and inferiority between triangular fuzzy numbers/triangular fuzzy-stochastic variables. The developed method can effectively tackle uncertainties described in terms of probability density functions, fuzzy membership functions, and discrete intervals. Moreover, the method can also improve upon the conventional interval fuzzy programming and two-stage stochastic programming approaches, with advantageous capabilities that are easily achieved with fewer constraints and significantly reduces consumption time. The developed model was applied to a case study of municipal solid waste management system in a city. The results indicated that reasonable solutions had been generated. The solution can help quantify the relationship between the change of system cost and the uncertainties, which could support further analysis of tradeoffs between the waste management cost and the system failure risk.     

Modes of governing Canadian waste management: a case study of Metro Vancouver’s energy-from-waste controversy

Managing municipal solid waste is a pressing environmental and political concern for Canadian municipalities who bear the primary responsibility for waste management (WM). In 2015, Metro Vancouver’s (MV’s) plans to expand their capacity to expand their WM capacity with energy-from-waste technology was abandoned, despite shrinking landfill space and persistent public opposition to new landfills. Using Bulkeley et al.’s [(2005). Governing municipal waste: towards a new analytical framework. Journal of Environmental Policy and Planning, 7(1), 1–23. doi:10.1080/15239080500251700] ‘modes of governing framework’, we analyse MV’s failed attempt to expand their energy-from-waste capacity to better understand the challenges associated with governing WM in Canada. We argue that a history of downloading responsibility for WM to municipalities, regional districts, and industry has fragmented WM governance, posing a challenge for developing new waste infrastructure. We find that this localization of responsibility is incompatible with contemporary WM challenges. The scalar mismatch between waste’s material impacts and the scale at which waste is managed has resulted in co-dependence and conflict between putatively independent municipalities, regional districts, and private companies. This inhibits higher-level WM coordination while the autonomy of individual municipalities is simultaneously undermined.     

城市生活垃圾处理的现状与管理研究

城市生活垃圾的处理与资源化是环保领域的一个难点,在管理上我国也缺乏相关的法律依据。本文介绍了城市生活垃圾处理的现状,同时针对构建我国城市生活垃圾管理体系提出了建议。     

Using LCA to evaluate impacts and resources conservation potential of composting: A case study of the Asti District in Italy

Separate collection of municipal solid waste has overcome the 50% threshold in the Asti District in northern Italy, nearly one-third being composed of household and green organic waste. In order to address present and future solutions, it becomes therefore fundamental to assess the environmental performances of the current management of organic waste from separate collection. A from-gate-to-cradle life cycle assessment (LCA) model has been developed by expanding system boundaries, in order to carry out the assessment in the context of the whole waste management streamline. The environmental performances of an existing aerobic plant were made available, based on field measured data, by paying attention to the role and contribution of waste management subsystems. The need for actual and reliable data on materials and energy input, as well as gross and net gains from materials recovery, including benefits arising from use of compost in farming activities, was probably the major drawback that had to be faced. The study integrated the findings of different investigations from the literature with field measured data in order to obtain a more comprehensive framework representative of the area under study. The results may help public administrators to better understand the suitability of using LCA tools when dealing with solid waste management strategies.     

A two-stage support-vector-regression optimization model for municipal solid waste management - a case study of Beijing, China

In this study, a two-stage support-vector-regression optimization model (TSOM) is developed for the planning of municipal solid waste (MSW) management in the urban districts of Beijing, China. It represents a new effort to enhance the analysis accuracy in optimizing the MSW management system through coupling the support-vector-regression (SVR) model with an interval-parameter mixed integer linear programming (IMILP). The developed TSOM can not only predict the city's future waste generation amount, but also reflect dynamic, interactive, and uncertain characteristics of the MSW management system. Four kernel functions such as linear kernel, polynomial kernel, radial basis function, and multi-layer perception kernel are chosen based on three quantitative simulation performance criteria [i.e. prediction accuracy (PA), fitting accuracy (FA) and over all accuracy (OA)]. The SVR with polynomial kernel has accurate prediction performance for MSW generation rate, with all of the three quantitative simulation performance criteria being over 96%. Two cases are considered based on different waste management policies. The results are valuable for supporting the adjustment of the existing waste-allocation patterns to raise the city's waste diversion rate, as well as the capacity planning of waste management system to satisfy the city's increasing waste treatment/disposal demands.     

基于共词分析的城市生活垃圾治理公共政策变迁量化分析

以1979—2020年我国中央政府颁发的411份城市生活垃圾治理政策文本作为研究对象,运用共词与聚类分析方法研究了我国不同时期城市生活垃圾治理公共政策焦点的演变规律。结果发现:纵观我国城市生活垃圾治理公共政策焦点的演变轨迹,在"技术路线"、"垃圾属性"、"管理手段"、"治理结构"和"保障机制"方面发生了显著的政策主题变迁,呈现出垃圾治理朝更加绿色、更加经济方向发展的趋势。未来,应从监管体系、资源评估、财政补贴、空间布局4个方面保障生活垃圾零污染、高价值资源化治理。     

Management of urban solid waste: Vermicomposting a sustainable option

Solid waste management is a worldwide problem and it is becoming more and more complicated day by day due to rise in population, industrialization as well as changes in our life style. Presently most of the waste generated is either disposed of in an open dump in developing countries or in landfills in the developed ones. Landfilling as well as open dumping requires lot of land mass and could also result in several environmental problems. Land application of urban/municipal solid waste (MSW) can be carried out as it is rich in organic matter and contains significant amount of recyclable plant nutrients. The presence of heavy metals and different toxics substances restricts its land use without processing. Vermicomposting of MSW, prior to land application may be a sustainable waste management option, as the vermicast obtained at the end of vermicomposting process is rich in plant nutrients and is devoid of pathogenic organism. Utilization of vermicast produced from urban/municipal solid waste in agriculture will facilitate in growth of countries economy by lowering the consumption of inorganic fertilizer and avoiding land degradation problem. Vermicomposting of urban/MSW can be an excellent practice, as it will be helpful in recycling valuable plant nutrients. This review deals with various aspects of vermicomposting of MSW.     

Flexible interval mixed-integer bi-infinite programming for environmental systems management under uncertainty

A number of inexact programming methods have been developed for municipal solid waste management under uncertainty. However, most of them do not allow the parameters in the objective and constraints of a programming problem to be functional intervals (i.e., the lower and upper bounds of the intervals are functions of impact factors). In this study, a flexible interval mixed-integer bi-infinite programming (FIMIBIP) method is developed in response to the above concern. A case study is also conducted; the solutions are then compared with those obtained from interval mixed-integer bi-infinite programming (IMIBIP) and fuzzy interval mixed-integer programming (FIMIP) methods. It is indicated that the solutions through FIMIBIP can provide decision support for cost-effectively diverting municipal solid waste, and for sizing, timing and siting the facilities’ expansion during the entire planning horizon. These schemes are more flexible than those identified through IMIBIP since the tolerance intervals are introduced to measure the level of constraints satisfaction. The FIMIBIP schemes may also be robust since the solutions are “globally-optimal” under all scenarios caused by the fluctuation of gas/energy prices, while the conventional ones are merely “locally-optimal” under a certain scenario.     

城市垃圾与可持续发展

论述了城市垃圾问题的现状。指出要实现城市的可持续发展，必须实现思想意识上的革命性转变，将垃圾视为推动经济、社会持续发展的“资源”，有效地管理和综合利用垃圾，使垃圾为人类造福。     

Assessing instruments for mixed household solid waste collection services in the Flemish region of Belgium

Instruments to reduce waste can be divided into three groups: first, pecuniary incentives; second, service level; finally, measurements stimulating prevention and waste reduction. Also specific characteristics of the community determine the amount of waste generated. We evaluate whether findings in literature on effectiveness of policy measures are valid for Belgium, specifically for the Flemish region. The policy mix instituted by the Flemish authorities in the ‘implementation plan household waste 2003–2007’ and implemented by local authorities, is assessed. Multiple regression analysis identifies those measurements having the greatest impact on household solid waste.We found an income elasticity of 0.326. Also the provided service level has a significant impact. Pecuniary incentives are effective instruments in reducing waste, with a price elasticity of −0.139. Furthermore, a higher percentage of direct costs, directly attributable to waste services, borne by households, reduces waste. A consequent implementation of the ‘polluter pays’ principle proves to be effective.     

Survey of household waste composition and quantities in Abuja,Nigeria

Inadequate management of household solid waste is a serious problem in many developing cities. The study aimed to evaluate the quantities and composition of household solid waste generation in Abuja within different socioeconomic groups. The wastes from 74 households across different socioeconomic levels in Abuja were collected, weighted and classified on a daily basis for seven days in February 2012. The result showed that the average daily per capita household waste generation is 0.634 kg/capita/day. The characteristic of solid waste in Abuja are typical for the developing cities and dominated by organic waste. Households waste consisted of 63.6% organic waste, 9.7% paper, 8.7% plastics, 3.2% metal, 2.6% glass, 1.6% textile and 10.6% others (unclassified) and the bulk density was 240 kg/m³. The evaluation of relationship between income and daily per capita household waste generation showed a positive relationship. The study revealed a statistically significant difference between household size and daily per capita household waste generation in high-income group; a slight significant difference between household size and daily per capita household waste generation in medium income group and no statistically significant difference between household size and daily per capita household waste generation in low-income group.     

Municipal solid waste generation in Kathmandu, Nepal

Waste stream characteristics must be understood to tackle waste management problems in Kathmandu Metropolitan City (KMC), Nepal. Three-stage stratified cluster sampling was used to evaluate solid waste data collected from 336 households in KMC. This information was combined with data collected regarding waste from restaurants, hotels, schools and streets. The study found that 497.3 g capita(-1) day(-1) of solid waste was generated from households and 48.5, 113.3 and 26.1 kg facility(-1) day(-1) of waste was generated from restaurants, hotels and schools, respectively. Street litter measured 69.3 metric tons day(-1). The average municipal solid waste generation rate was 523.8 metric tons day(-1) or 0.66 kg capita(-1) day(-1) as compared to the 320 metric tons day(-1) reported by the city. The coefficient of correlation between the number of people and the amount of waste produced was 0.94. Key household waste constituents included 71% organic wastes, 12% plastics, 7.5% paper and paper products, 5% dirt and construction debris and 1% hazardous wastes. Although the waste composition varied depending on the source, the composition analysis of waste from restaurants, hotels, schools and streets showed a high percentage of organic wastes. These numbers suggest a greater potential for recovery of organic wastes via composting and there is an opportunity for recycling. Because there is no previous inquiry of this scale in reporting comprehensive municipal solid waste generation in Nepal, this study can be treated as a baseline for other Nepalese municipalities.     

Towards the estimation of demand for recycling in Chile: The case of Santiago

In developing countries, the recycling of municipal solid waste (MSW) as an alternative to the traditional MSW management requires an economic sustainability valuation. From this perspective, the estimation of demand for recycling is crucial. In this paper, we study the case of recycling MSW in Santiago, Chile. We estimate the relation between the monthly amount of MSW separated voluntarily from apartments located in Santiago and the monthly price required to participate in a municipal recycling program. We consider the transference of the municipal cost savings to the owners of the apartments due to the amount of MSW separated for recycling, which is not collected and deposited in the current MSW system. For the estimation, we use concepts from environmental economics and psychology, analyzing the operation and municipal costs incurred by current MSW management and designing and applying a survey based on a contingent valuation method (CVM) approach. The results indicate that the percentage of MSW separated for recycling varies between a 27.98% and 33.18%, that only four MSW types are affected by a variation of the monthly price, and that a reduction of monthly collection trips in the current MSW system from 24 to 18 can be obtained. Additionally, we discuss a number of methodological aspects to be considered in a similar study of valuation of recycling in developing countries. Our conclusion is that Santiago has favorable conditions for the implementation of a recycling program as an alternative to the current MSW system.     

LCA: A decision support tool for environmental assessment of MSW management systems

Life cycle assessment (LCA) can be successfully applied to municipal solid waste (MSW) management systems to identify the overall environmental burdens and to assess the potential environmental impacts. In this study, two methods used for current MSW management in Phuket, a province of Thailand, landfilling (without energy recovery) and incineration (with energy recovery), are compared from both energy consumption and greenhouse gas emission points of view. The comparisons are based on a direct activity consideration and also a life cycle perspective. In both cases as well as for both parameters considered, incineration was found to be superior to landfilling. However, the performance of incineration was much better when a life cycle perspective was used. Also, landfilling reversed to be superior to incineration when methane recovery and electricity production were introduced. This study reveals that a complete picture of the environmental performance of MSW management systems is provided by using a life cycle perspective.     

An inexact reverse logistics model for municipal solid waste management systems

This paper proposed an inexact reverse logistics model for municipal solid waste management systems (IRWM). Waste managers, suppliers, industries and distributors were involved in strategic planning and operational execution through reverse logistics management. All the parameters were assumed to be intervals to quantify the uncertainties in the optimization process and solutions in IRWM. To solve this model, a piecewise interval programming was developed to deal with Min-Min functions in both objectives and constraints. The application of the model was illustrated through a classical municipal solid waste management case. With different cost parameters for landfill and the WTE, two scenarios were analyzed. The IRWM could reflect the dynamic and uncertain characteristics of MSW management systems, and could facilitate the generation of desired management plans. The model could be further advanced through incorporating methods of stochastic or fuzzy parameters into its framework. Design of multi-waste, multi-echelon, multi-uncertainty reverse logistics model for waste management network would also be preferred.     

A comprehensive waste collection cost model applied to post-consumer plastic packaging waste

Post-consumer plastic packaging waste (PPW) can be collected for recycling via source separation or post-separation. In source separation, households separate plastics from other waste before collection, whereas in post-separation waste is separated at a treatment centre after collection. There are also two collection schemes, either curb side or via drop-off locations. These different schemes have impact on total costs of collection at the municipal level. It can also influence the facility choices and network design. Therefore, a method which can compare costs of various collection schemes is needed.A comprehensive cost model was developed to compare costs of municipal collection schemes of PPW. The ‘municipal waste collection cost model’ is based on variables including fixed and variable costs per vehicle, personnel cost, container or bag costs as well as on emission costs (using imaginary carbon taxes). The model can be used for decision support when strategic changes to the collection scheme of municipalities are considered. The model takes into account the characteristics of municipalities, including urbanization degree and taxation schemes for household waste management.The model was applied to the Dutch case of post-consumer plastic packaging waste. Results showed that that in general post-separation collection has the lowest costs and curb side collection in urban municipalities without residual waste collection taxing schemes the highest. These results were supported by the conducted sensitivity analysis, which showed that higher source separation responses are negatively related to curb side collection costs. Greenhouse gas emission costs are a significant part of the total costs when collecting post-consumer plastic packaging waste due to the low density to weight ratio of the materials collect. These costs can amount to 15% of the total collection costs.     

A model recycling program for Alabama

Solid waste disposal is becoming a difficult problem for many states. Since 1960, the amount of municipal solid waste (MSW) has been increasing at a rate of 1% per year. More than 75% of the waste is comprised of recyclable materials. Several states have mandated recycling to decrease the volume of waste intended for disposal. Those mandated programs are very popular, but depend on many political, social, and economic factors for success. While Alabama has the manufacturing infrastructure to support a mandated recycling program, no recycling legislation has been promulgated. At this time recycling is only being done on a voluntary basis. A mandatory program with the proper support, education and funding could allow Alabama to recycle much of the 5.2 million tons of waste that are generated within its borders each year.     

Inclusive municipal solid waste management policy in Nigeria: engaging the informal economy in post-2015 development agenda

The problem of municipal solid waste has remained intractable in Nigeria despite the state’s central role in municipal solid waste management (MSWM). Policy and reforms of the MSWM system have invariably excluded the informal economy, with this exclusion frequently reinforced by uncritical implementation of neo-liberal development policies. Yet, the informal economy fortuitously remains active in solid waste collection, recycling, and disposal. This article is the aggregate outcome of an 8-year multi-stakeholder engagement in MSWM in Nigerian cities. It draws on insights from first-hand qualitative engagement with informal waste workers, interviews with key stakeholders, policy documents, and relevant literature to situate the Nigerian informal waste economy within current international development discourse. While highlighting the implications of social acceptance and inclusion of the waste economy in post-2015 MSWM and development policy, the study notes the lack of an articulate policy on MSWM in Nigeria and canvasses a specific policy to integrate the ubiquitous informal waste economy in MSWM. The paper suggests that inclusion per sé is central to the sustainable development goals (SDGs), and argues that an inclusive MSWM policy in Nigeria is desirable as it maps onto the SDGs which aim to improve lives in the post-2015 development era.     

Determining the socially optimal recycling rate

What municipal recycling rate is socially optimal? One credible answer would consider the recycling rate that minimizes the overall social costs of managing municipal waste. Such social costs are comprised of all budgetary costs and revenues associated with operating municipal waste and recycling programs, all costs to recycling households associated with preparing and storing recyclable materials for collection, all external disposal costs associated with waste disposed at landfills or incinerators, and all external benefits associated with the provision of recycled materials that foster environmentally efficient production processes. This paper discusses how to estimate these four components of social cost to then estimate the optimal recycling rate.     

The Prospect of Municipal Waste Landfill Diversion Depends on Geographical Location

This study reports on experimentation with municipal and industrial solid waste in Brazil, on mutual inspection of municipal sanitation models in selected Spanish and Brazilian towns, and on observations of municipal solid waste (MSW) management models effective in Argentina, Great Britain, Sweden, and Germany. The diversity of management strategies inhibits technology transfer. Judging by the models inspected, Sweden and Germany appear to be best prepared for stricter European landfill diversion targets in the near future. Experimentation in Brazil has resulted in a proactive MSW management model based on divided collection, which achieves 80 percent landfill diversion. This result, surprisingly, meets and exceeds European diversion targets in a South American context. As the gap in strategy and target narrows between South America and Europe, both technology and management methods may gain intercontinental mobility and thus enhance commercial ties between the two markets in the specific branch of MSW management.