The effective practices of mobile phone producers' green supply chain management in reducing GHG emissions

The aim of this study is to identify management practices that effectively reduce greenhouse gas (GHG) emissions with regard to the green supply chain adopted by mobile phone producers. Six cases were surveyed (Apple, Samsung, LG, Huawei, Nokia, and ZTE). The main source of data was sustainability reports, which were retrieved from the Global Reporting Initiative database. A special data analysis technique called rank analysis was adopted. The results revealed that the effective practices to reduce GHG 1 emissions were related to production process and business travel; those that were effective for reducing GHG 2 emissions were related to facilities accreditation and energy saving; and those effective in reducing GHG 3 emissions were related to logistics and customer practices. No effective actions related to the management of relationships with suppliers were identified by this study. Indicative models for the relationship between actions and GHG emissions were developed, as was a value‐stream map. The previous studies reporting the effective practices in other industries reported results for reducing GHG 1 or GHG 3, or overall GHG emissions, without discriminating among the actions taken to reduce such emissions, although some limited actions were reported. This study describes the effective practices along the whole supply chain—both upstream and downstream—and it also lists the actions related to addressing all the emissions, whether GHG 1, 2, or 3.     

Direct and indirect land-use change as prospective climate change indicators for peri-urban development transitions

With urban areas responsible for a significant share of total anthropogenic emissions, greenhouse gas (GHG) emissions due to land-use change (LUC) induced by peri-urban (PU) development have the potential to be considerable. Despite this, there is little research into the transition from PU cropland to housing in terms of contribution to global warming. This paper presents a cross-sectoral integrative method for prospective climate change evaluation of PU LUC. Specifically, direct LUC (dLUC) GHG emissions from converting PU cropland to greenfield housing were examined. Additionally, GHG emissions due to displaced crop production inducing indirect LUC (iLUC) elsewhere were assessed. GHG impacts of dLUC and iLUC were each determined to be approximately 8 per cent of total GHG emissions due to a greenfield housing development displacing PU cropland. This magnitude of dLUC and iLUC emissions suggests that both have importance in future land-use decision making with respect to PU environments.     

Changing places, changing emissions: The cross-scale reliability of greenhouse gas emission inventories in the US

Greenhouse gas (GHG) emission inventories, which currently inform abatement policy discussions, are developed mostly from national scale data. Nevertheless, although the policy debate tends to take place in global and national arenas, action to abate GHG emissions is inherently within the provenance of local institutions and communities. The purpose of this paper is to examine how much information is lost by not estimating GHG emissions data at scales finer than the whole US. Such information may be critical in bridging global and local policy. Differences in the composition of GHG emission sources based on GHG emission inventories at three nested spatial scales (national, state, local) for four study sites (in Kansas, North Carolina, Ohio and Pennsylvania) are analysed, drawing upon initial results of a large collaborative study known as the 'Association of American Geographers-Global Change in Local Places (GCLP)' project. The concept of spatial sovereignty of emissions is developed to test the cross-scale reliability of emission inventories. For the test year 1990, close agreement is found in the by-gas composition of GHG emissions among national, state and local inventories. Spatial sovereignty in this case is maintained. However close agreement is not found in the by-source composition of GHG emissions among national, state and local inventories. Spatial sovereignty in this case is not maintained. Regular compilation of state and local emissions source inventories may be necessary to track important spatial and temporal deviations from national trends.     

Greenhouse gas emissions from forestry operations: a life cycle assessment

Most forest carbon assessments focus only on biomass carbon and assume that greenhouse gas (GHG) emissions from forestry activities are minimal. This study took an in-depth look at the direct and indirect emissions from Pacific Northwest (PNW) Douglas-fir [Pseudotsuga menziesii (Mirbel) Franco] forestry activities to support or deny this claim. Greenhouse gas budgets for 408 "management regimes" were calculated using Life Cycle Assessment (LCA) methodology. These management regimes were comprised of different combinations of three types of seedlings (P + 1, 1 + 1, and large plug), two types of site preparation (pile and burn, and chemical), 17 combinations of management intensity including fertilization, herbicide treatment, pre-commercial thinning (PCT), commercial thinning (CT), and nothing, and four different rotation ages (30, 40, 50, and 60 yr). Normalized to 50 yr, average direct GHG emissions were 8.6 megagrams (Mg) carbon dioxide equivalents (CO2e) ha(-1), which accounted for 84% of total GHG emissions from the average of 408 management regimes. Harvesting (PCT, CT, and clear cutting) contributed the most to total GHG emissions (5.9 Mg CO2e per 700 m3 harvested timber), followed by pile and burn site preparation (4.0 Mg CO2e ha(-1) or 32% of total GHG emissions) and then fertilization (1.9 Mg CO2e ha(-1) or 15% of total GHG emissions). Seedling production, seedling transportation, chemical site preparation, and herbicide treatment each contributed less than 1% of total GHG emissions when assessed per hectare of planted timberland. Total emissions per 100 m3 averaged 1.6 Mg CO2e ha(-1) over all 408 management regimes. An uncertainty analysis using Monte Carlo simulations revealed that there are significant differences between most alternative management regimes.     

Using coal for transportation in China: Life cycle GHG of coal-based fuel and electric vehicle,and policy implications

This paper compares the GHG emissions of coal-to-liquid (CTL) fuels to the GHG emissions of electric vehicles (EVs) powered with coal-to-electricity in China. A life cycle model is used to account for full fuel cycle and use-phase emissions, as well as vehicle cycle and battery manufacturing emissions. It is found that the reduction of life cycle GHG emissions of EVs charged by electricity generated from coal, without utilizing carbon dioxide capture and storage (CCS) technology can be 3–36% when compared to petroleum-based gasoline car. The large range in emissions reduction potential is driven by the many different power generation technologies that are and could in the future be used to generate electricity in China. When CCS is employed in power plants, the GHG emission reductions increase to 60–70% compared to petroleum-based gasoline car. However, the use of coal to produce liquid transportation fuels (CTL fuels) will likely lead to significantly increased life cycle GHG emissions, potentially 30–140% higher than petroleum-based gasoline. When CCS is utilized in the CTL plant, the CTL fueled vehicles emit roughly equal GHG emissions to petroleum-based gasoline vehicles from the life cycle perspective. The authors conclude that policies are therefore needed in China in order to accelerate battery technology and infrastructural improvements for EV charging, increased energy efficiency management, and deployment of low-carbon technologies such as CCS.     

The Potential Role for Management of U.S. Public Lands in Greenhouse Gas Mitigation and Climate Policy

Management of forests, rangelands, and wetlands on public lands, including the restoration of degraded lands, has the potential to increase carbon sequestration or reduce greenhouse gas (GHG) emissions beyond what is occurring today. In this paper we discuss several policy options for increasing GHG mitigation on public lands. These range from an extension of current policy by generating supplemental mitigation on public lands in an effort to meet national emissions reduction goals, to full participation in an offsets market by allowing GHG mitigation on public lands to be sold as offsets either by the overseeing agency or by private contractors. To help place these policy options in context, we briefly review the literature on GHG mitigation and public lands to examine the potential for enhanced mitigation on federal and state public lands in the United States. This potential will be tempered by consideration of the tradeoffs with other uses of public lands, the needs for climate change adaptation, and the effects on other ecosystem services.     

Assessing energy use and greenhouse gas emission savings from compact housing: a small-town case study

Data from the US Department of Energy show that single-family detached homes consume about 17% more energy per year than attached homes and roughly double that of units in large multi-family structures. While greater use of these compact housing types could reduce a community's energy use and greenhouse gas (GHG) emissions, most local climate action plans (CAPs) do not quantify those potential savings. This article describes how the climate action planning process in the Town of Blacksburg, Virginia has addressed residential sector GHG emissions and demonstrates a methodology applied in that community for estimating potential GHG reductions from compact housing. It finds that in an aggressive compact housing scenario GHG emissions from new housing could be decreased by as much as 36%, without factoring in additional energy conservation or efficiency measures. The article concludes with a discussion of the opportunities and challenges related to implementing compact housing in future residential development.     

The environmental life cycle assessment of agricultural sector in Thailand: EIO‐LCA approach

Agriculture is one of the major sectors in Thailand, with more than half of the population employed in agriculture‐related occupations. This study evaluated energy consumption and greenhouse gas (GHG) emissions of the Thai agricultural sector by applying the economic input–output life cycle assessment (EIO‐LCA) approach. The model evaluates the entire agricultural sector supply chain. Based on one million Thai baht (approximately $27,800 U.S. dollars) final demand of the rice paddy sector, the carbon dioxide (CO₂) emissions from the electricity sector are responsible for 27% (1,246 kilograms [kg] CO₂) of the total CO₂ emissions, whereas the emissions from paddy activities associated with the fertilizers and pesticides sector account for 16% (760 kg CO₂) and 11% (513 kg CO₂), respectively. The top three largest GHG emissions from the total agricultural sector supply chain are associated with the oil palm, the coffee and tea, and the fruit sectors. The government should promote and encourage sustainable agriculture by reducing the use of fertilizers and pesticides and by utilizing energy‐saving technologies.     

Greenhouse gas balance for composting operations

The greenhouse gas (GHG) impact of composting a range of potential feedstocks was evaluated through a review of the existing literature with a focus on methane (CH(4)) avoidance by composting and GHG emissions during composting. The primary carbon credits associated with composting are through CH(4) avoidance when feedstocks are composted instead of landfilled (municipal solid waste and biosolids) or lagooned (animal manures). Methane generation potential is given based on total volatile solids, expected volatile solids destruction, and CH(4) generation from lab and field incubations. For example, a facility that composts an equal mixture of manure, newsprint, and food waste could conserve the equivalent of 3.1 Mg CO(2) per 1 dry Mg of feedstocks composted if feedstocks were diverted from anaerobic storage lagoons and landfills with no gas collection mechanisms. The composting process is a source of GHG emissions from the use of electricity and fossil fuels and through GHG emissions during composting. Greenhouse gas emissions during composting are highest for high-nitrogen materials with high moisture contents. These debits are minimal in comparison to avoidance credits and can be further minimized through the use of higher carbon:nitrogen feedstock mixtures and lower-moisture-content mixtures. Compost end use has the potential to generate carbon credits through avoidance and sequestration of carbon; however, these are highly project specific and need to be quantified on an individual project basis.     

Nitrogen oxide and methane emissions under varying tillage and fertilizer management

Comprehensive assessment of the total greenhouse gas (GHG) budget of reduced tillage agricultural systems must consider emissions of nitrous oxide (N2O) and methane (CH4), each of which have higher global warming potentials than carbon dioxide (CO2). Tillage intensity may also impact nitric oxide (NO) emissions, which can have various environmental and agronomic impacts. In 2003 and 2004, we used chambers to measure N2O, CH4, and NO fluxes from plots that had been managed under differing tillage intensity since 1991. The effect of tillage on non-CO2 GHG emissions varied, in both magnitude and direction, depending on fertilizer practices. Emissions of N2O following broadcast urea (BU) application were higher under no till (NT) and conservation tillage (CsT) compared to conventional tillage (CT). In contrast, following anhydrous ammonia (AA) injection, N2O emissions were higher under CT and CsT compared to NT. Emissions following surface urea ammonium nitrate (UAN) application did not vary with tillage. Total growing season non-CO2 GHG emissions were equivalent to CO2 emissions of 0.15 to 1.9 Mg CO2 ha(-1) yr(-1) or 0.04 to 0.53 Mg soil-C ha(-1) yr(-1). Emissions of N2O from AA-amended plots were two to four times greater than UAN- and BU-amended plots. Total NO + N2O losses in the UAN treatment were approximately 50% lower than AA and BU. This study demonstrates that N2O emissions can represent a substantial component of the total GHG budget of reduced tillage systems, and that interactions between fertilizer and tillage practices can be important in controlling non-CO2 GHG emissions.     

Effects of reed straw, zeolite, and superphosphate amendments on ammonia and greenhouse gas emissions from stored duck manure

Stored poultry manure can be a significant source of ammonia (NH) and greenhouse gases (GHGs), including nitrous oxide (NO), methane (CH), and carbon dioxide (CO) emissions. Amendments can be used to modify physiochemical properties of manure, thus having the potential to reduce gas emissions. Here, we lab-tested the single and combined effects of addition of reed straw, zeolite, and superphosphate on gas emissions from stored duck manure. We showed that, over a period of 46 d, cumulative NH emissions were reduced by 61 to 70% with superphosphate additions, whereas cumulative NO emissions were increased by up to 23% compared with the control treatment. Reed straw addition reduced cumulative NH, NO, and CH emissions relative to the control by 12, 27, and 47%, respectively, and zeolite addition reduced cumulative NH and NO emissions by 36 and 20%, respectively. Total GHG emissions (as CO-equivalents) were reduced by up to 27% with the additions of reed straw and/or zeolite. Our results indicate that reed straw or zeolite can be recommended as amendments to reduce GHG emissions from duck manure; however, superphosphate is more effective in reducing NH emissions.     

Life cycle assessment of a pulverized coal power plant with post-combustion capture, transport and storage of CO2

In this study the methodology of life cycle assessment has been used to assess the environmental impacts of three pulverized coal fired electricity supply chains with and without carbon capture and storage (CCS) on a cradle to grave basis. The chain with CCS comprises post-combustion CO₂ capture with monoethanolamine, compression, transport by pipeline and storage in a geological reservoir. The two reference chains represent sub-critical and state-of-the-art ultra supercritical pulverized coal fired electricity generation. For the three chains we have constructed a detailed greenhouse gas (GHG) balance, and disclosed environmental trade-offs and co-benefits due to CO₂ capture, transport and storage. Results show that, due to CCS, the GHG emissions per kWh are reduced substantially to 243 g/kWh. This is a reduction of 78 and 71% compared to the sub-critical and state-of-the-art power plant, respectively. The removal of CO₂ is partially offset by increased GHG emissions in up- and downstream processes, to a small extent (0.7 g/kWh) caused by the CCS infrastructure. An environmental co-benefit is expected following from the deeper reduction of hydrogen fluoride and hydrogen chloride emissions. Most notable environmental trade-offs are the increase in human toxicity, ozone layer depletion and fresh water ecotoxicity potential for which the CCS chain is outperformed by both other chains. The state-of-the-art power plant without CCS also shows a better score for the eutrophication, acidification and photochemical oxidation potential despite the deeper reduction of SO_x and NO_x in the CCS power plant. These reductions are offset by increased emissions in the life cycle due to the energy penalty and a factor five increase in NH₃ emissions.     

Meeting the climate change challenge: a scan of greenhouse gas emissions in BC communities

The Canadian province of British Columbia (BC) is taking significant steps towards climate change mitigation, including a carbon tax on fossil fuels and legislation that mandates greenhouse gas (GHG) reductions within public sector organisations and GHG reduction targets for municipalities. This paper carries out a preliminary scan of the GHG emissions of BC communities using the provincially mandated Community Energy and Emissions Inventory reports. We map trends in energy consumption and emissions per capita while uncovering correlations between these variables and land-use planning, geographic, and demographic variables. These data have shown that: (1) energy consumption in BC is an adequate proxy for GHG emissions; (2) transportation, more than buildings, is a strong driver of overall GHG emissions; (3) building emissions are not likely to be strongly influenced by dwelling type, but density of buildings is crucial; (4) geographic location influences emissions; and (5) population size and age do not appear to influence per capita emissions. These findings are particularly important as they suggest that the potentially intransigent factors of income and population size need not be barriers to achieving significant GHG reductions. The policy onus thus falls squarely on transportation planning, land-use, energy conservation, and fuel switching. This in turn highlights the importance of deeper underlying sociocultural and political preferences, which shape the behaviours that have a strong bearing on emissions profiles.     

Mitigation paths for Chinese iron and steel industry to tackle global climate change

Based on a recognition of the essence of climate change and the pressure on China to reduce its greenhouse gas (GHG) emissions, this paper interprets the important role that the Chinese iron and steel industry may play in managing emissions. Through an investigation of the key sources of GHG emissions in the Chinese iron and steel industry, a comparison of the current Chinese and international situations, and a survey of the technology and methods available for reducing GHG emissions, and their application in China, the authors analyze the major issues currently faced by the Chinese iron and steel industry, and propose the following four approaches through which the industry might reduce its GHG emissions: (1) encouragement of clean development mechanism (CDM) projects, mainly involving secondary energy reuse, to provide capital and technology for GHG reduction activities in China; (2) stimulation of the social responsibility-based voluntary carbon market (VCM) to increase the long-term benefits for the Chinese iron and steel industry from emission reductions; (3) undertaking of strict energy auditing to help enterprises establish appropriate emission reduction targets and formulate reasonable plans; (4) promotion of emission reduction-oriented investment within the industry to obtain profits from project operation, while at the same time gaining extra compensation for emission reductions. More specifically, the design of each of these approaches should take into consideration the related economic factors and incentive mechanisms.     

Australian Mining Symposium 1979

The Sydney Showground was the scene for a major international exhibition of mining and exploration equipment - AIMEX '79. In conjunction with this was held the Australian Mining Symposium, organized by Thomson Publications (Aust) Pty Ltd, and sponsored by the Australian Mining Industry Council. The symposium, entitled ‘Projections for the future in mining and exploration— political, economic and global’, included a number of papers of wide interest, with two or three papers of much narrower technical appeal. Proceedings of the symposium are to be published. Australian Mining Symposium, Sydney, February 1979.     

The jurisdictional framework for municipal action to reduce greenhouse gas emissions: Case studies from Canada, the USA and Germany

This paper addresses two questions: (1) Given a commitment at the national level to reduce greenhouse gas (GHG) emissions, what tools are available to national-level governments to induce complimentary actions required at subnational levels? (2) In the absence of a serious commitment at national and regional levels to reduce GHG emissions, what is the scope for, and jurisdictional rights of, cities to undertake actions? In this context, federal, regional and municipal legislation relevant for GHG emissions is examined in Canada, the USA and Germany. Regarding the first question, different national governments find themselves in considerably different positions to implement climate initiatives at subnational levels, with the German government in the strongest position and the Canadian government in the weakest. The implications of this for a nation's willingness to adopt emission reduction targets could be serious. Regarding the second question, there are few significant differences among Canadian, US and German municipalities' jurisdictional capabilities (and limitations) to reduce GHG emissions. Though limited in their legal capacity, these municipalities demonstrate that through their own, often informal, initiatives they can reinforce and compliment the more formal, regulatory actions by senior-level governments, thereby paving the way for senior-level governments to deliver meaningful domestic emission reductions.     

Biochar and earthworm effects on soil nitrous oxide and carbon dioxide emissions

Biochar is the product of pyrolysis produced from feedstock of biological origin. Due to its aromatic structure and long residence time, biochar may enable long-term carbon sequestration. At the same time, biochar has the potential to improve soil fertility and reduce greenhouse gas (GHG) emissions from soils. However, the effect of biochar application on GHG fluxes from soil must be investigated before recommendations for field-scale biochar application can be made. A laboratory experiment was designed to measure carbon dioxide (CO) and nitrous oxide (NO) emissions from two Irish soils with the addition of two different biochars, along with endogeic (soil-feeding) earthworms and ammonium sulfate, to assist in the overall evaluation of biochar as a GHG-mitigation tool. A significant reduction in NO emissions was observed from both low and high organic matter soils when biochars were applied at rates of 4% (w/w). Earthworms significantly increased NO fluxes in low and high organic matter soils more than 12.6-fold and 7.8-fold, respectively. The large increase in soil NO emissions in the presence of earthworms was significantly reduced by the addition of both biochars. biochar reduced the large earthworm emissions by 91 and 95% in the low organic matter soil and by 56 and 61% in the high organic matter soil (with and without N fertilization), respectively. With peanut hull biochar, the earthworm emissions reduction was 80 and 70% in the low organic matter soil, and only 20 and 10% in the high organic matter soil (with and without N fertilization), respectively. In high organic matter soil, both biochars reduced CO efflux in the absence of earthworms. However, soil CO efflux increased when peanut hull biochar was applied in the presence of earthworms. This study demonstrated that biochar can potentially reduce earthworm-enhanced soil NO and CO emissions. Hence, biochar application combined with endogeic earthworm activity did not reveal unknown risks for GHG emissions at the pot scale, but field-scale experiments are required to confirm this.     

Linking climate policy across economic sectors: A case for green growth in Nepal

While the energy sector is the largest global contributor to greenhouse gas (GHG) emissions, the agriculture, forestry, and other land use (AFOLU) sector account for up to 80% of GHG emissions in the least developed countries (LDCs). Despite this, the nationally determined contributions (NDCs) of LDCs, including Nepal, focus primarily on climate mitigation in the energy sector. This paper introduces green growth—a way to foster economic growth while ensuring access to resources and environmental services—as an approach to improving climate policy coherence across sectors. Using Nepal as a case country, this study models the anticipated changes in resource use and GHG emissions between 2015 and 2030, that would result from implementing climate mitigation actions in Nepal's NDC. The model uses four different scenarios. They link NDC and policies across economic sectors and offer policy insights regarding (1) energy losses that could cost up to 10% of gross domestic product (GDP) by 2030, (2) protection of forest resources by reducing the use of biomass fuels from 465 million gigajoules (GJ) in 2015 to 195 million GJ in 2030, and (3) a significant reduction in GHG emissions by 2030 relative to the business-as-usual (BAU) case by greater use of electricity from hydropower rather than biomass. These policy insights are significant for Nepal and other LDCs as they seek an energy transition towards using more renewable energy and electricity.     

Bioethanol from waste: Life cycle estimation of the greenhouse gas saving potential

This paper considers two alternative feedstocks for bioethanol production, both derived from household waste—Refuse Derived Fuel (RDF) and Biodegradable Municipal Waste (BMW). Life Cycle Assessment (LCA) has been carried out to estimate the GHG emissions from bioethanol using these two feedstocks. An integrated waste management system has been considered, taking into account recycling of materials and production of bioethanol in a combined gasification/bio-catalytic process. For the functional unit defined as the ‘total amount of waste treated in the integrated waste management system’, the best option is to produce bioethanol from RDF—this saves up to 196 kg CO₂ equiv. per tonne of MSW, compared to the current waste management practice in the UK.However, if the functional unit is defined as ‘MJ of fuel equiv.’ and bioethanol is compared with petrol on an equivalent energy basis, the results show that bioethanol from RDF offers no saving of GHG emissions compared to petrol. For example, for a typical biogenic carbon content in RDF of around 60%, the life cycle GHG emissions from bioethanol are 87 g CO₂ equiv./MJ while for petrol they are 85 g CO₂ equiv./MJ. On the other hand, bioethanol from BMW offers a significant GHG saving potential over petrol. For a biogenic carbon content of 95%, the life cycle GHG emissions from bioethanol are 6.1 g CO₂ equiv./MJ which represents a saving of 92.5% compared to petrol. In comparison, bioethanol from UK wheat saves 28% of GHG while that from Brazilian sugar cane – the best performing bioethanol with respect to GHG emissions – saves 70%. If the biogenic carbon of the BMW feedstock exceeds 97%, the bioethanol system becomes a carbon sequester. For instance, if waste paper with the biogenic carbon content of almost 100% and a calorific value of 18 MJ/kg is converted into bioethanol, a saving of 107% compared to petrol could be achieved. Compared to paper recycling, converting waste paper into bioethanol saves 460 kg CO₂ equiv./t waste paper or eight times more than recycling.     

Estimating the potential of greenhouse gas mitigation in Kazakhstan

As part of the studies related to the obligations of the UN Framework Convention on Climate Change, the Republic of Kazakhstan started activities to inventory greenhouse gas (GHG) emissions and assess of GHG mitigation options. The objective of this paper is to present an estimate of the possibility of mitigating GHG emissions and determine the mitigation priorities. It presents a compilation of the possible options and their assessment in terms of major criteria and implementation feasibility. Taking into account the structure of GHG emissions in Kazakhstan in 1990, preliminary estimates of the potential for mitigation are presented for eight options for the energy sector and agriculture and forestry sector. The reference scenario prepared by expert assessments assumes a reduction of CO₂ emissions in 1996–1998 by about 26% from the 1990 level due to general economic decline, but then emissions increase. It is estimated that the total potential for the mitigation of CO₂ emissions for the year 2000 is 3% of the CO₂ emissions in the reference scenario. The annual reduction in methane emissions due to the estimated options can amount to 5%–6% of the 1990 level.