Anaerobic digestion of agro-industrial waste enriched with bovine bone meal for improved biogas production and biofertilization

The increase in animal and agro-industrial production must be accompanied by the development of appropriate waste and by-product management strategies. Anaerobic digestion is a promising approach to recycle these wastes and reintegrate them into the economic production cycle of biogas and biofertilizer. In order to improve the performance of the anaerobic mesophilic digestion of abundant agro-industrial wastes constituted by potato peel (PP), and poultry waste (PW) and study the contribution of bovine bone meal (BB) as additive rich in phosphorus, which can help to neutralize the acidity of the substrate. The 10-point simplex-centroid design and the isoresponse surfaces strategy were used. This study demonstrated that in mesophilic bio-digestion, the using bovine bones in admixture with agroindustrial residue provided for the proper balance of chemical components required for proliferation of microbiological agent of bioconversion, which also resulted in an increase in biogas production capacity. The best formula was so composed by 66.67% bovine bone, 16.67% potatoes peel, and 16.67% poultry waste. The stability was achieved here after only 12 days. The digestate generated from it was fulfilled with the microbiological and chemical requirements for safety defined by the NF U44-551 standard. Germination test revealed that this optimal produced digestate, did not hinder growth, in fact, almost 85% of seed was germinated. Finally, fertilization experiments prove that this digestate can boost the growth of bell pepper (Capsicum annuum).     

Production of vermifertilizer from guar gum industrial wastes by using composting earthworm <Emphasis Type="Italic">Perionyx sansibaricus</Emphasis> (Perrier)

Efforts have been made to convert the guar gum industrial waste into a value-added product, by employing a new earthworm species for vermicomposting e.g. Perionyx sansibaricus (Perrier) (Megascolecidae), under laboratory conditions. Industrial lignocellulosic waste was amended with other organic supplements (saw dust and cow dung); and three types of vermibeds were prepared: guar gum industrial waste + cow dung + saw dust in 40: 30: 30 ratio (T₁), guar gum industrial waste + cow dung + saw dust in 60: 20: 20 ratio (T_2,), and guar gum industrial waste + cow dung + saw dust in 75: 15: 10 ratio (T₃). As compared to initial concentrations, vermicomposts exhibited a decrease in organic C content (5.0–11.3%) and C:N ratio (11.1–24.4%) and an increase in total N (18.4–22.8%), available P (39.7–92.4%), and exchangeable K (9.4–19.7%) contents, after 150 days of vermicomposting. A vermicomposting coefficient (VC) was used to compare of vermicomposting with the experimental control (composting). P. sansibaricus exhibited maximum value of mean individual live weight (742.8 ± 21.1 mg), biomass gain (442.94 ± 21.8 mg), growth rate (2.95 ± 0.15 mg day⁻¹), cocoon numbers (96.0 ± 5.1) and reproduction rate (cocoons worm⁻¹ day⁻¹) (0.034 ± 0.001) in T₂ treatment. In T₃ maximum mortality (30.0 ± 4.01 %) in earthworm population was observed. Overall, T₂ vermibed appeared as an ideal substrate to manage guar gum industrial waste effectively. Vermicomposting can be proposed as a low-input basis technology to convert industrial waste into value-added biofertilizer.     

Direct utilization of kitchen waste for bioethanol production by separate hydrolysis and fermentation (SHF) using locally isolated yeast

Kitchen wastes containing high amounts of carbohydrates have potential as low-cost substrates for fermentable sugar production. In this study, enzymatic saccharification of kitchen waste was carried out. Response surface methodology (RSM) was applied to optimize the enzymatic saccharification conditions of kitchen waste. This paper presents analysis of RSM in a predictive model of the combined effects of independent variables (pH, temperature, glucoamylase activity, kitchen waste loading, and hydrolysis time) as the most significant parameters for fermentable sugar production and degree of saccharification. A 100 mL of kitchen waste was hydrolyzed in 250 mL of shake flasks. Quadratic RSM predicted maximum fermentable sugar production of 62.79 g/L and degree of saccharification (59.90%) at the following optimal conditions: pH 5, temperature 60°C, glucoamylase activity of 85 U/mL, and utilized 60 g/L of kitchen waste as a substrate at 10 h hydrolysis time. The verification experiments successfully produced 62.71 ± 0.7 g/L of fermentable sugar with 54.93 ± 0.4% degree of saccharification within 10 h of incubation, indicating that the developed model was successfully used to predict fermentable sugar production at more than 90% accuracy. The sugars produced after hydrolysis of kitchen waste were mainly attributed to monosaccharide: glucose (80%) and fructose (20%). The fermentable sugars obtained were subsequently used as carbon source for bioethanol production by locally isolated yeasts: Saccharomyces cerevisiae, Candida parasilosis, and Lanchancea fermentati. The yeasts were successfully consumed as sugars hydrolysate, and produced the highest ethanol yield ranging from 0.45 to 0.5 g/g and productivity between 0.44 g L^–1 h^–1 and 0.47 g L^–1 h^–1 after 24-h incubation, which was equivalent to 82.06–98.19% of conversion based on theoretical yield.     

Evaluation of nitrogen retention and microbial populations in poultry litter treated with chemical, biological or adsorbent amendments

Poultry litter is a valuable nutrient source for crop production. Successful management to reduce ammonia and its harmful side-effects on poultry and the environment can be aided by the use of litter amendments. In this study, three acidifiers, two biological treatments, one chemical urease inhibitor and two adsorber amendments were added to poultry litter. Chemical, physical and microbiological properties of the litters were assessed at the beginning and the end of the experiment. Application of litter amendments consistently reduced organic N loss (0-15%) as compared to unamended litter (20%). Acidifiers reduced nitrogen loss through both chemical and microbiological processes. Adsorbent amendments (water treatment residuals and chitosan) reduced nitrogen loss and concentrations of ammonia-producing bacteria and fungi. The use of efficient, cost-effective litter amendments to maximum agronomic, environmental and financial benefits is essential for the future of sustainable poultry production.     

Effect of chemical and microbial amendments on ammonia volatilization from composting poultry litter

Research has shown that aluminum sulfate (alum) and phosphoric acid greatly reduce ammonia (NH3) volatilization from poultry litter; however, no studies have yet reported the effects of these amendments on field-scale composting of poultry litter. The objectives of this study were to (i) evaluate NH3 volatilization from composting litter by measuring both NH3 volatilization and changes in total nitrogen (N) in the litter and (ii) evaluate potential methods of reducing NH3 losses from composting poultry litter. Poultry litter was composted for 68 d the first year and 92 d the second year. Eleven treatments were screened in Year 1, which included an unamended control, a microbial mixture, a microbial mixture with 5% alum incorporated into the litter, 5 and 10% alum rates either surface-applied or incorporated, and 1 and 2% phosphoric acid rates either surface-applied or incorporated. Treatments in Year 2 included an unamended control, a microbial mixture, alum (7% by fresh wt.), and phosphoric acid (1.5% by fresh wt.). Alum and phosphoric acid reduced NH3 volatilization from composting poultry litter by as much as 76 and 54%, respectively. The highest NH3 emission rates were from microbial treatments each year. Compost treated with chemical amendments retained more initial N than all other treatments. Due to the cost and N loss associated with composting poultry litter, composting is not economical from an agronomic perspective compared with the use of fresh poultry litter.     

Glassceramics obtained from industrial waste

Large areas of Latvia are contaminated with industrial waste: metallurgical slag, fly-ash, etching refuse, peat, and coal ash as well as glass waste which often contain dangerous substances. From the environmental point of view this waste should be neutralised. As this waste also contains valuable chemical compounds, it can be considered as a raw material for the generation of new materials. One method of utilisation is to produce recycled materials — street plates, decorative tiles, or floor tiles. Dense sintered glassceramics with a water uptake of 0.34–3.23 wt.%, a final density of 2.93–3.05 g/cm³, and a bending strength of 80–96 MPa have been created from industrial waste. The mast chemically durable glassceramics contained clay additions. Thus, the material containing only waste had a durability (mass loss) of 3.02% in 0.1 N HCl, while the composition containing 30% clay addition had a durability of 0.2% in 0.1 N HCl.     

废弃钻井泥浆的固化处理

废弃钻井泥浆的处理是油气勘探与开发工业中人们极为关注的。文章在分析废弃钻井泥浆性质的基础上，通过化学稳定与固化处理试验研究得出以水泥为主，烟炭，石灰等为添加剂的固化剂配方，实验结果表明，经固化处理的废弃泥浆，其固化产物重金属浸出率低，稳定性好，具有一定的抗氧强度，从而能有效地降低废弃泥浆对环境的污染危害，文中还对各种辅加剂对固化效果的影响进行了分析。     

Improvement of fruit and vegetable waste anaerobic digestion performance and stability with co-substrates addition

The effect of fish waste (FW), abattoir wastewater (AW) and waste activated sludge (WAS) addition as co-substrates on the fruit and vegetable waste (FVW) anaerobic digestion performance was investigated under mesophilic conditions using four anaerobic sequencing batch reactors (ASBR) with the aim of finding the better co-substrate for the enhanced performance of co-digestion. The reactors were operated at an organic loading rate of 2.46–2.51 g volatile solids (VS) l⁻¹ d⁻¹, of which approximately 90% were from FVW, and a hydraulic retention time of 10 days. It was observed that AW and WAS additions with a ratio of 10% VS enhanced biogas yield by 51.5% and 43.8% and total volatile solids removal by 10% and 11.7%, respectively. However FW addition led to improvement of the process stability, as indicated by the low VFAs/Alkalinity ratio of 0.28, and permitted anaerobic digestion of FVW without chemical alkali addition. Despite a considerable decrease in the C/N ratio from 34.2 to 27.6, the addition of FW slightly improved the gas production yield (8.1%) compared to anaerobic digestion of FVW alone. A C/N ratio between 22 and 25 seemed to be better for anaerobic co-digestion of FVW with its co-substrates. The most significant factor for enhanced FVW digestion performance was the improved organic nitrogen content provided by the additional wastes. Consequently, the occurrence of an imbalance between the different groups of anaerobic bacteria which may take place in unstable anaerobic digestion of FVW could be prevented.     

Modes of governing Canadian waste management: a case study of Metro Vancouver’s energy-from-waste controversy

Managing municipal solid waste is a pressing environmental and political concern for Canadian municipalities who bear the primary responsibility for waste management (WM). In 2015, Metro Vancouver’s (MV’s) plans to expand their capacity to expand their WM capacity with energy-from-waste technology was abandoned, despite shrinking landfill space and persistent public opposition to new landfills. Using Bulkeley et al.’s [(2005). Governing municipal waste: towards a new analytical framework. Journal of Environmental Policy and Planning, 7(1), 1–23. doi:10.1080/15239080500251700] ‘modes of governing framework’, we analyse MV’s failed attempt to expand their energy-from-waste capacity to better understand the challenges associated with governing WM in Canada. We argue that a history of downloading responsibility for WM to municipalities, regional districts, and industry has fragmented WM governance, posing a challenge for developing new waste infrastructure. We find that this localization of responsibility is incompatible with contemporary WM challenges. The scalar mismatch between waste’s material impacts and the scale at which waste is managed has resulted in co-dependence and conflict between putatively independent municipalities, regional districts, and private companies. This inhibits higher-level WM coordination while the autonomy of individual municipalities is simultaneously undermined.     

Diversion from landfill: quality products from valuable plastics

Mechanical recycling of 100% post-consumer plastic waste into high-quality products has been performed. The chemical and physical properties of these recycled materials have been compared with similar products manufactured from virgin resins. The properties of a blow-moulded bottle prepared from 100% post-consumer high-density polyethylene (HDPE) showed that this recycled polymer exceeded the materials specifications for virgin plastic designs. Similarly, a sample of thermoplastic polyolefin (TPO, 100% polypropylene), obtained entirely from shredder residue (SR) displayed sufficient material strength for future separation and reprocessing.     

Biomethanation of plant materials and agricultural residues using dung samples as wild population of microbes and also with isolated methanogens

Recycling of plant materials and agricultural residues for biomethanation was attempted in vials. The methanogenic activities of certain sewage samples have also been tested. Both sterilized and non-sterilized biomasses were used. Biomethanation was carried out with dung samples (cow, goat, buffalo, piggery wastes and poultry wash) as wild populations of microbes and in combination with other microbial isolates (isolated in the laboratory).Biomethanation had been observed to be good in most cases and particularly with the sterilized biomass. Mixed inoculum (dung samples and poultry wash) was found to be best for biomethanation. Of the microbe isolates, isolates from buffalo, pig and paper mill wastes appear to be most effective. Pretreated sawdust and rice straw were found to be good subtrates for biomethanation. Of the different plant biomass used Spirogyra (algae), Ipomea and water hyacinth were most effective whereas Jatropa gossypifolia and Parthenium sp. were the least effective. Biomethanation of Spirogyra was carried out both in anoxic and oxic conditions. Though methane production decreased enormously under oxic conditions, definite methane production continued indicating that the biomethanation process is not exclusively anoxic. Similarly, biomethanation of sewage samples from different sewage treatment plants were carried out with and without isolated methanogens and methane production was found to be moderate.     

Effect of chemical and microbial amendment on phosphorus runoff from composted poultry litter

Environmental impacts of composting poultry litter with chemical amendments at the field scale have not been well quantified. The objectives of this study were to measure (i) P runoff and (ii) forage yield and N uptake from small plots fertilized with composted and fresh poultry litter. Two composting studies, aerated using mechanical turning, were conducted in consecutive years. Composted litter was collected at the completion of each study for use in runoff studies. Treatments in runoff studies included an unfertilized control, fresh (uncomposted) poultry litter, and litter composted with no amendment, H3PO4, alum, or a microbial mixture. An additional treatment, litter composted with alum plus the microbial mixture, was evaluated during the first year. Fertilizer treatments were applied at rates equivalent to 8.96 Mg ha(-1) and rainfall simulators were used to produce a 5 cm h(-1) storm event. Composted poultry litter, regardless of treatment, had higher total P concentrations than fresh poultry litter. Composting poultry litter resulted in reductions of N/P ratios by as much as 51%. Soluble reactive P concentrations were lowest in alum-treated compost, which reduced soluble P concentrations in runoff water by as much as 84%. Forage yields and N uptake were greatest from plots fertilized with fresh poultry litter. Composting poultry litter without the addition of C sources can increase P concentrations in the end product and surface runoff. This study also indicated that increased rates of composted poultry litter would be required to meet equivalent N rates supplied by fresh poultry litter.     

精细化工厂污水排放控制措施

中原油田天然气产销总厂精细化工一厂为了实施清洁化生产,对污水外排从控制污水产生入手,采取了改冷却水一次排放为循环利用、化学处理改善水质及提高水的循环利用率等一系列措施,投入改造资金5万余元,将污水日排放量由1200 m3降到50 m3 ,且实现达标排放,取得了较好的经济效益和环境效益。     

Methodological aspects of life cycle assessment of integrated solid waste management systems

Environmental life cycle assessment (LCA) developed rapidly during the 1990s and has reached a certain level of harmonisation and standardisation. LCA has mainly been developed for analysing material products, but can also be applied to services, e.g. treatment of a particular amount of solid waste. This paper discusses some methodological issues which come into focus when LCAs are applied to solid waste management systems. The following five issues are discussed. (1) Upstream and downstream system boundaries: where is the ‘cradle’ and where is the ‘grave’ in the analysed system? (2) Open-loop recycling allocation: besides taking care of a certain amount of solid waste, many treatment processes also provide additional functions, e.g. energy or materials which are recycled into other products. Two important questions which arise are if an allocation between the different functions should be made (and if so how), or if system boundaries should be expanded to include several functions. (3) Multi-input allocation: in waste treatment processes, different materials and products are usually mixed. In many applications there is a need to allocate environmental interventions from the treatment processes to the different input materials. The question is how this should be done. (4) Time: emissions from landfills will continue for a long time. An important issue to resolve is the length of time emissions from the landfill should be considered. (5) Life cycle impact assessment: are there any aspects of solid waste systems (e.g. the time horizon) that may require specific attention for the impact assessment element of an LCA? Although the discussion centres around LCA it is expected that many of these issues are also relevant for other types of systems analyses.     

废弃钻井液微生物降解菌室内筛选研究

针对川渝地区废弃钻井液成分复杂、污染危害大的特点,提出利用微生物法处理废弃钻井液的方法。通过菌株分离、菌株筛选、菌株对废弃钻井液的降解利用实验筛选出8株降解菌株,进行了废弃钻井液的降解利用情况研究,表明筛选出的降解菌株均能够以废弃钻井液为唯一碳源,具备了快速分解废弃钻井液的能力。     

IN SITU MEASUREMENT OF ADSORPTION AND BIOTRANSFORMATION AT A HAZARDOUS WASTE SITE1

ABSTRACT: A three well injection-production test was performed at the United Creosoting Company (UCC) site in Conroe, Texas, to estimate the effective in situ retardation factors for adsorption and to evaluate the significance of biotransformation in limiting the transport of polycydic aromatics present in the shallow aquifer. The field test was also used as a model to determine if this type of testing would be feasible at other hazardous waste sites. During the test, chloride, a non-reactive tracer and two organic compounds, naphthalene and paradichlorobenzene (pDCB), were injected into a center well for 24 hours followed by clean ground water for six days. Ground water was continuously produced from two adjoining wells and monitored to observe the breakthrough of these compounds. Data from the test were analyzed by comparing the statistical moments of the chloride and organics distributions. Retardation factors for naphthalene and pDCB were estimated to be 1.03 and 0.97 by comparison of the statistical moments. A significant loss of naphthalene and pDCB was also observed during the three well test, apparently due to biotransformation. These results suggest that biotransformation is the major process limiting the transport of naphthalene and similar compounds at the UCC site.     

我国含氰废水处理工艺的发展方向

在总结和分析20年来我国化纤行业含氰废水处理经验的基础上，提出气浮-A／O（缺氧／好氧法）工艺用于含氰废水的处理，即将曝气池前端的曝气器关闭，在池内实行缺氧、好氧处理，曝气池后端好氧段的污泥经泵回流至前端的缺氧段。结果使总氮的去除率从43％提高到72％，磷的去除率从0提高到40％，COD的去除率也有不同程度提高，而能耗仅为原先的72％。     

Comparison of energy produced from waste by removing its different components: A case study of the waste landfill in Tehran

In developing and populated cities such as Tehran, a massive amount of municipal solid waste (MSW), both wet and dry, is transferred to landfills daily. Combustion is one of the most common methods of using mixed waste energy from the past to the present. The Dulong formula is widely used to calculate the energy released from MSW combustion. According to the constituent components of Tehran MSW, removing food waste leads to an increase in energy potential, which will be a suitable condition for energy production. In this work, the energy derived from the combustion of mixed and separated dry MSW generated in Tehran was calculated using the experimental Dulong formula and tables in Integrated Solid Waste Management (Tchobanoglous et al. 1993, McGraw‐Hill). The Dulong formula indicates that the use of Tehran mixed MSW (without separating materials for recycling) as a fuel source yields 8,966.40 KJ/kg while the use of Tchobanoglous et al. (1993) tables can generate 8,236 kJ/kg. By removing food waste and recyclable materials, the potential of energy production changes to 22,047 kJ/kg using the Dulong formula and 16,207 kJ/kg and the Tchobanoglous et al. (1993) tables. It indicates increase by 1.46 times and 46%, respectively. Regarding the 200‐ton capacity of the Tehran waste incinerator, the Dulong formula indicated generation of 4,409 MJ/day energy, and the Tchobanoglous et al. table presents 3,241 MJ/day. Therefore, considering that Tehran generates more than 4,000 tons of reject waste daily, it can easily be converted to energy rather than landfilled. This can alleviate the problem of buying land and construction of landfills and leachate generation.     

Survey of household waste composition and quantities in Abuja,Nigeria

Inadequate management of household solid waste is a serious problem in many developing cities. The study aimed to evaluate the quantities and composition of household solid waste generation in Abuja within different socioeconomic groups. The wastes from 74 households across different socioeconomic levels in Abuja were collected, weighted and classified on a daily basis for seven days in February 2012. The result showed that the average daily per capita household waste generation is 0.634 kg/capita/day. The characteristic of solid waste in Abuja are typical for the developing cities and dominated by organic waste. Households waste consisted of 63.6% organic waste, 9.7% paper, 8.7% plastics, 3.2% metal, 2.6% glass, 1.6% textile and 10.6% others (unclassified) and the bulk density was 240 kg/m³. The evaluation of relationship between income and daily per capita household waste generation showed a positive relationship. The study revealed a statistically significant difference between household size and daily per capita household waste generation in high-income group; a slight significant difference between household size and daily per capita household waste generation in medium income group and no statistically significant difference between household size and daily per capita household waste generation in low-income group.     

Sound management of brominated flame retarded (BFR) plastics from electronic wastes: State of the art and options in Nigeria

Management of flame retarded plastics from waste electrical and electronic equipment (WEEE) has been posing a major challenge to waste management experts because of the potential environmental contamination issues especially the formation of polybrominated-dioxins and -furans (PBDD/F) during processing. In Nigeria, large quantities of electronic waste (e-waste) are currently being managed—a significant quantity of which is imported illegally as secondhand electronics. As much as 75% of these illegal imports are never reused but are rather discarded. These waste electronic devices are mostly older equipment that contains brominated flame retardants (BFRs) such as penta-brominated diphenyl ethers (PBDEs), and polybrominated biphenyls (PBBs) which are presently banned in Europe under the EU WEEE and RoHS Directives. Risk assessment studies found both to be persistent, bio-accumulative and toxic. The present management practices for waste plastics from WEEE in Nigeria, such as open burning and disposal at open dumps, creates potential for serious environmental pollution. This paper reviews the options in the environmentally sound management of waste plastics from electronic wastes. Options available include mechanical recycling, reprocessing into chemicals (chemical feedstock recycling) and energy recovery. The Creasolv^® and Centrevap^® processes, which are the outcome of the extensive research at achieving sound management of waste plastics from WEEE in Europe, are also reviewed. These are solvent-based methods of removing BFRs and they presently offer the best commercial and environmental option in the sound management of waste BFR-containing plastics. Because these developments have not been commercialized, WEEE and WEEE plastics are still being exported to developing countries. The industrial application of these processes and the development of eco-friendlier alternative flame retardants will help assure sound management of WEEE plastics.