Determining the socially optimal recycling rate

What municipal recycling rate is socially optimal? One credible answer would consider the recycling rate that minimizes the overall social costs of managing municipal waste. Such social costs are comprised of all budgetary costs and revenues associated with operating municipal waste and recycling programs, all costs to recycling households associated with preparing and storing recyclable materials for collection, all external disposal costs associated with waste disposed at landfills or incinerators, and all external benefits associated with the provision of recycled materials that foster environmentally efficient production processes. This paper discusses how to estimate these four components of social cost to then estimate the optimal recycling rate.     

Door-stepping as a strategy for improved food waste recycling behaviour – Evaluation of a full-scale experiment

Comparisons were made between two groups of households in a multi-family residential area in order to investigate how oral information through a door-stepping campaign can influence household food waste recycling behaviour from a quantitative as well as qualitative perspective. Source-separation behaviour was assessed both through weakly weighting of all source-separated food waste and dry recyclables as well as residual waste generated over a period of 104 weeks, as well as repeated waste composition analyses. Introduction of source-separation of food waste for biogas production significantly decreased the generation of residual waste in the whole case-study area. An average generation of 0.72 and 0.71 kg, household⁻¹, week⁻¹ of separately collected food waste was found amongst households receiving and not contacted through the door-stepping campaign respectively. The difference between the groups was not statistically significant. Four waste composition analyses show that the average source-separation ratio of food waste was higher and the ratio of incorrectly sorter material lower in the food waste fraction amongst households where oral information had been provided. A decrease over time in the source-separation ratio of food waste amongst households receiving oral information suggests a low durability of the door-stepping campaign. No signs were seen of increased source-separation ratio or decreased ratio of incorrectly sorted material amongst dry recyclables. The study supports previous findings pointing at accessibility as a key factor for increased recycling behaviour. However, results also suggest that such systems must address convenience also in the household interior.     

A model recycling program for Alabama

Solid waste disposal is becoming a difficult problem for many states. Since 1960, the amount of municipal solid waste (MSW) has been increasing at a rate of 1% per year. More than 75% of the waste is comprised of recyclable materials. Several states have mandated recycling to decrease the volume of waste intended for disposal. Those mandated programs are very popular, but depend on many political, social, and economic factors for success. While Alabama has the manufacturing infrastructure to support a mandated recycling program, no recycling legislation has been promulgated. At this time recycling is only being done on a voluntary basis. A mandatory program with the proper support, education and funding could allow Alabama to recycle much of the 5.2 million tons of waste that are generated within its borders each year.     

Development of a framework to implement a recycling program in an elementary school

This study developed a system to plan, evaluate, implement, and monitor a waste reduction and source-separation program, which was then tested through a field study in a New York City elementary school. Despite efforts to implement integrated waste management in elementary schools, appropriate planning tools that document performance and support program development are lacking. To fill this gap, a system for analyzing existing programs was developed. After identifying the phases required for a successful program, a scoring system was developed to quantify the performance of existing programs. To assess existing protocol, recommendations from leading municipalities were reviewed, and the performance of existing programs was quantified within the scoring system. The existing protocol was found to contain similarities, but an overarching approach was needed to connect the provisions with programs that have been successfully deployed. From this analysis, a scoring system was developed to take into consideration the major elements needed for a waste reduction and source-separation plan, colloquially referred to as a recycling plan, as well as the specifics of implementation. This system allows for the review of programs already developed, and can pinpoint limitations prior to implementation. The framework was evaluated through the test case school, with both waste audit data and diagrams. From the lessons learned, successful techniques and recommendations for utilizing this framework were created.     

A Lifecycle Assessment and Economic Valuation of Recycling

The financial costs of recycling schemes fail to account for external costs and benefits such as environmental pollution, road congestion and accidents. This paper compares the environmental and social impacts of a kerbside collection scheme for recyclable household waste, with a bring scheme, using lifecycle assessment. Economic valuation is used to assign relative weights to these impacts. A second comparison examines the relative external costs of recycling and landfill disposal of waste. The results show that the kerbside collection scheme has a lower external cost than the bring scheme, but this is of less importance than the benefits to be gained within the manufacturing system by using secondary materials. It is concluded that the combination of lifecycle assessment and economic valuation is an effective means of evaluation to direct the sustainable development of waste management.     

Who will pay? Subsidies or taxes for recycling in the heartland

Attaining recycling goals of 25 to 50% over the next few years will require substantial recycling of residential wastes. A combined program of curbside recycling of conventional post-consumer materials and collection and composting of both leaves and grass will yield a composite diversion rate of 12 to 21% by weight. But in many communities, particularly in the west central and south central states of the American heartland, implementation of such programs will result in a net increase in solid waste management costs. Case studies of four communities in Oklahoma are used to estimate the potential increase in first-year net costs that would result from implementing a combined recycling and yard waste composting program. The results are compared to survey data from Oklahoma and Florida that define the amount residents are likely to be willing to pay for the benefits of recycling. The potential to close the apparent willingness-to-pay gap through state subsidies is then assessed. Where state capital grants programs are insufficient to bridge the gap, and local officials are reluctant to impose costs that are not publicly supported, public education efforts will be needed to increase the value residents ascribe to the nonexclusive positive externalities and local nonmarket benefits of recycling.     

Hong Kong citizens' attitude towards waste recycling and waste minimization measures

In a street survey conducted in Hong Kong, it was found that Hong Kong people generally support waste recycling and minimization measures. The results showed that statistically there are associations between sex, accommodation type, education levels and age on one hand and people's attitude toward some waste recycling and minimization measures on the other. A significant number of the surveyed subjects would feel uneasy during the generation of waste if they knew that the recyclable materials would not be recycled. However, this feeling of uneasiness will lessen considerably if the materials are being recycled. With the feeling of uneasiness being lessened, a deterring factor on consumption was weakened. Thus it is plausible that when recycling is more widely carried out, the actual volume of consumption will increase if the urgency of waste minimization is not widely understood. It was also discovered that in an economically prosperous Hong Kong, people can be more supportive to slightly more expensive green products than in Western countries in recession.     

Waste Management in Guangdong Cities: The Waste Management Literacy and Waste Reduction Preferences of Domestic Waste Generators

A questionnaire survey was conducted in 2002 on 1365 households in two prefectural-level cities in the Pearl River Delta, Jiangmen and Zhongshan. Three groups of issues are covered in this paper: 1) waste management literacy, concerns, and public participation; 2) waste recycling practices and the potential for waste avoidance; and 3) public environmental literacy. This study confirms findings from previous surveys and provides new information on important issues such as imposing monetary charges on waste and environmental activities, littering, source separation programs (SSPs), and public participation and expectations in local waste management. Saving up recyclable materials for redemption in waste depots is commonly practiced in mainland China regardless of the level of development of a city, although at the household level, high-income families tend to place less value on the revenues to be gained from redemption than lower income groups do. Data from the previous and the present studies indicate that such voluntary but largely economically driven waste recovery behavior diverts at least 10% of the household waste from the waste stream. Although uncompensated SSP is less appealing in the two cities than compensated SSP, it was found that when the median per capita income of a city reaches RMB2000 per month, a high participation rate for uncompensated waste recovery is more likely to occur. Education and income levels are the chief factors affecting littering behavior and the potential for waste avoidance. Contrary to general belief, the local Chinese community is active in microwaste management. The concern, however, is over the inability of the grassroots bureaucracy to deal with rising expectations for waste collection services and neighborhood cleanliness.     

Curbside collection of recyclables. II. Simulation and economic analysis

Curbside collection of recyclable material can be expensive because the inherent costs of curbside collection are high, but also because amounts collected per residence are small compared to the total waste stream, and extra activity may be required, such as sorting. In this paper a simulation model is used to investigate the effect of collection method and route characteristics on route time. The simulation models presented calculate set-out amount based on route characteristics, set-out rate (SOR), and participation rate (PR). Route times are estimated for various conditions: constant SOR, constant PR, and constant set-out amount. Furthermore, a method for using route time to estimate vehicle and labor needs is presented, and used to estimate economic costs for one and two-person crew collection methods for the three simulation conditions mentioned above. The two-person crew is found to cost less than the one-person crew, for most simulated conditions.     

Evaluation of life cycle inventory data for recycling systems

This paper reviews databases on material recycling (primary as well as secondary production) used in life cycle assessments (LCA) of waste management systems. A total of 366 datasets, from 1980 to 2010 and covering 14 materials, were collected from databases and reports. Totals for CO₂-equivalent emissions were compared to illustrate variations in the data. It was hypothesised that emissions from material production and the recycling industry had decreased over time due to increasing regulation, energy costs and process optimisation, but the reported datasets did not reveal such a general trend. Data representing the same processes varied considerably between databases, and proper background information was hard to obtain, which in turn made it difficult to explain the large differences observed. Those differences between the highest and lowest estimated CO₂ emissions (equivalents) from the primary production of newsprint, HDPE and glass were 238%, 443% and 452%, respectively. For steel and aluminium the differences were 1761% and 235%, respectively. There is a severe lack of data for some recycled materials; for example, only one dataset existed for secondary cardboard. The study shows that the choice of dataset used to represent the environmental load of a material recycling process and credited emissions from the avoided production of virgin materials is crucial for the outcome of an LCA on waste management. Great care and a high degree of transparency are mandatory, but advice on which datasets to use could not be determined from the study. However, from the gathered data, recycling in general showed lower emission of CO₂ per kg material than primary production, so the recycling of materials (considered in this study) is thus beneficial in most cases.     

Integrating waste,manufacturing and industrial symbiosis: an analysis of recycling,remanufacturing and waste treatment firms in Texas

The continually increasing volume of the waste stream has led to numerous calls for strategies to close the loop on material use through industrial symbiosis strategies which direct used material and products (wastes) back to production processes. By use of a survey of recycling, remanufacturing and waste treatment firms in Texas, this paper asks if these firms can operate as a bridge between production and consumption/waste to efficiently increase the flow of used materials and products back to production processes at the local level. The results suggest that while most materials and used products are collected locally, only some can be re(consumed) locally. Moreover, the firms face negative perceptions about their activities from industry and the public at large that likely slow both the rate of entry of new firms into these markets and the expansion possibilities of existing firms. In addition, the types of conventions that characterize the interactions of more successful firms are not well developed in this sector(s). It is unlikely that recycling, remanufacturing and waste treatment firms can become central players in the production, consumption and waste cycle loop until society develops production design, marketing and consumption philosophies that include recycling and remanufacturing at a fundamental level.     

Integrating waste, manufacturing and industrial symbiosis: an analysis of recycling, remanufacturing and waste treatment firms in Texas

The continually increasing volume of the waste stream has led to numerous calls for strategies to close the loop on material use through industrial symbiosis strategies which direct used material and products (wastes) back to production processes. By use of a survey of recycling, remanufacturing and waste treatment firms in Texas, this paper asks if these firms can operate as a bridge between production and consumption/waste to efficiently increase the flow of used materials and products back to production processes at the local level. The results suggest that while most materials and used products are collected locally, only some can be re(consumed) locally. Moreover, the firms face negative perceptions about their activities from industry and the public at large that likely slow both the rate of entry of new firms into these markets and the expansion possibilities of existing firms. In addition, the types of conventions that characterize the interactions of more successful firms are not well developed in this sector(s). It is unlikely that recycling, remanufacturing and waste treatment firms can become central players in the production, consumption and waste cycle loop until society develops production design, marketing and consumption philosophies that include recycling and remanufacturing at a fundamental level.     

放射性浓缩液桶内干燥过程数学模型及动态仿真

为实现放射性浓缩液最大程度减容,设计了桶内干燥系统,基于物料衡算与热量衡算,建立了干燥过程动态数学模型,考察了不同的工艺条件对系统总体运行参数的影响,预测了桶内物料质量、含盐率、理论料面高度、温度、蒸发速率等关键参数随时间的变化规律。结果表明:干燥总时长随加热功率、浓缩液含盐率、浓缩液温度、最终干燥盐分湿含率以及第一阶段单次加料体积的增大而减小;干燥初期,新物料的加入对桶内含盐率有较为显著的降低作用;提高干燥强度将降低料面高度,间接降低热能有效利用率;在典型的工艺条件下,桶内干燥系统理论干燥总时长为281.19h,平均蒸发速率为3.43kg/h,平均处理能力为4.05L/h。为桶内干燥系统设计及试验提供理论指导。     

Recycling in Brazil: Challenges and prospects

This article presents a comparative analysis of the performance in formal and informal areas that deal with solid waste in Brazil. The article demonstrates that there has been significant progress in areas related to recycling and that this progress has been based mainly on informality and on the precarious labour conditions for the pickers of recyclable materials. The article also focuses on the problems found in the model for waste recovery that is being implemented in Brazil and that is based on allocation of precarious waste recovery facilities; this model has mostly small operational capabilities even in large municipalities. These problems are discussed in contrast to the great challenges imposed by the new legal framework of the country. Finally, the article proposes a categorisation of the technological models of material recovery facilities (MRFs) based on their degree of automation and nominal capacities in a manner similar to that used worldwide for incineration plants.     

System dynamics model for analyzing effects of eco-design policy on packaging waste management system

EU's long-term objective is to become a recycling and resource effective society, where waste is utilized as a resource and waste generation is prevented. A system dynamics model was developed to analyze the policy mechanisms that promote packaging material efficiency in products through increased recycling rates. The model includes economic incentives such as packaging and landfill taxes combined with market mechanisms, behavioral aspects and ecological considerations in terms of material efficiency (the packaging material per product unit, recycled fraction in products). The paper presents the results of application of various policy instruments for increasing packaging material efficiency and recovery rate and reducing landfilled fraction. The results show that a packaging tax is an effective policy instrument for increasing the material efficiency. It ensures the decrease of the total consumption of materials and subsequent waste generation. The tax helps to counteract a rebound effect, which, as identified by the analysis, can be caused by reduced material costs due to eco-design. The model is applied to the case of Latvia. Yet, the elements and structure of the model developed are similar to waste management systems in many countries. By changing numeric values of certain parameters, the model can be applied to analyze policy mechanisms in other countries.     

Modelling and analysis of international recycling between developed and developing countries

To deal with the complexity of recycling, a wide variety of models have been developed, each serving a specific purpose. Despite the current trend increasing international trade in recycling-related material flows, the international dimension of physical and economic relationships in recycling is often ignored in current models and analyses. This paper develops a formal model of an international material-product chain (MPC) that represents the mechanism behind international recycling. The attention is focused on the case of a developed and a developing country that exchange material commodities, final products and recyclable waste. Among others, the model demonstrates that taking into account environmental externalities results in higher levels of recycling. Moreover, we show that international recycling is mainly driven by regional differences in the quantity and quality of factor endowments and economic efficiency of recycling. Given that industrialised countries are relatively well endowed with recyclable waste, the recovery rate usually exceeds the utilisation rate. In developing countries, an opposite pattern is observed.     

An analysis of variables influencing the material composition of automobiles

The use of materials is studied broadly, because of the environmental problems related to extraction, production, consumption and waste treatment. The use and substitution of materials in products is therefore a relevant issue for environmental policy making. Studies have been done to describe the material flow or to measure the impact of materials or products on the environment. However, these studies do not often consider economic, substitution and dynamic aspects of material flows. Other studies on material flows analyse the relationship between the use of materials and economic growth, but they do not consider substitution between materials. For environmental policy making economic, technological and environmental aspects of the use of materials need to be considered. Especially, substitution of materials is important. In various countries material and product policies are imposed on a variety of materials and products. For evaluation of these policies their environmental and economic effects need to be examined in detail. This study aims to analyse the economic and technological factors influencing the use of materials and the substitution between different materials dynamically. The goal is to obtain an insight in the effect that material levies may have on the use and substitution of materials. The statistical analysis is performed on a specific product-group because decisions on the use of materials are taken on a product-level. The case study is performed on automobiles. The results show that the material use is largely an autonomous development. The price of aluminium has a positive, significant effect on the use of that material. The price of plastics has a positive, but not significant effect on the use of plastics. Reasons may be that the costs of a raw material are small relative to the processing costs, and that the production process can only be changed slowly. Other factors, like competitiveness and consumers' tastes, may be more important for substitution. This implies that levies or subsidies on certain materials is not a promising policy to change the use of materials. Besides time, there are two other factors that have a positive and significant relationship with the use of aluminium and plastics: the fuel efficiency, which is the distance driven divided by the energy used; and, the road tax, which depends on the weight of a car. However, these effects are caused by their positive relationship with time. The main conclusion of the case study is that imposing a levy on materials may not have the desired or expected effect of reduction in material use.     

A comprehensive waste collection cost model applied to post-consumer plastic packaging waste

Post-consumer plastic packaging waste (PPW) can be collected for recycling via source separation or post-separation. In source separation, households separate plastics from other waste before collection, whereas in post-separation waste is separated at a treatment centre after collection. There are also two collection schemes, either curb side or via drop-off locations. These different schemes have impact on total costs of collection at the municipal level. It can also influence the facility choices and network design. Therefore, a method which can compare costs of various collection schemes is needed.A comprehensive cost model was developed to compare costs of municipal collection schemes of PPW. The ‘municipal waste collection cost model’ is based on variables including fixed and variable costs per vehicle, personnel cost, container or bag costs as well as on emission costs (using imaginary carbon taxes). The model can be used for decision support when strategic changes to the collection scheme of municipalities are considered. The model takes into account the characteristics of municipalities, including urbanization degree and taxation schemes for household waste management.The model was applied to the Dutch case of post-consumer plastic packaging waste. Results showed that that in general post-separation collection has the lowest costs and curb side collection in urban municipalities without residual waste collection taxing schemes the highest. These results were supported by the conducted sensitivity analysis, which showed that higher source separation responses are negatively related to curb side collection costs. Greenhouse gas emission costs are a significant part of the total costs when collecting post-consumer plastic packaging waste due to the low density to weight ratio of the materials collect. These costs can amount to 15% of the total collection costs.     

Recycling — an environmentally friendly and income generating activity towards sustainable solid waste management. Case study — Dar es Salaam City, Tanzania

Traditionally solid waste management has evolved as mainly the removal of municipal wastes by hauling them out of the city boundaries and dumping them ‘there’. This is in conformity with the ‘out of sight out of mind’ philosophy. However, with the ever increasing tonnage of refuse due to the expansion of urban centers, which implies increased collection, transportation and disposal costs, recycling is currently accepted as a sustainable approach to solid waste management. This paper reports on the findings of a study, conducted in the city of Dar es Salaam between the years 1993 and 1995, on the scavenging activities and recycling trends of some selected items in Dar es Salaam. Apart from the discussions on existing solid waste generation rates (2000 tonnes/day), composition (60% being organic/or vegetable matter) and their management in Dar es Salaam, the paper also presents data obtained through a survey of Vingunguti dump site and other waste collection centers. It was established that there are currently about 600 solid waste scavengers in Dar es Salaam, approximately 109 of whom operate at Vingunguti dump site and others at 14 different collection centers. Many of them opted for scavenging due to unemployment. The study findings indicate that their average monthly income exceeded the official minimum wage (at the time of study) enabling them to support their families. This demonstrates the potential of recycling to generate gainful employment with implied lower crime rates among the unemployed. Recycling activities in the city were observed to be not only a critical source of raw materials for small-scale industries, in the absence of which they would cease to operate, but also a widely accepted environmentally friendly technology for solid waste management. Out of 294 tonnes of studied waste materials (paper, metal, plastic, glass and textiles) only 4 tonnes are recovered and recycled. The remaining 290 tonnes/day of recyclable material are left to pollute the environment or are collected and transported for final disposal and, therefore, unnecessarily contribute to the shortening of the life span of the dump site. Finally, the paper gives some recommendations for improved recycling activity so as to make it an important means of reducing the overall volume of waste materials to be transported and deposited in the dump site and at the same time provide a potential opportunity for employment for unskilled workers.     

More than a response to food insecurity: demographics and social networks of urban dumpster divers

Paradoxically, cities in the developed world are simultaneously increasing levels of food waste and food insecurity. Social assistance programmes intend to provide vulnerable populations with food, but many people instead choose to collect food from municipal waste streams, including “dumpster diving”. Most food-insecure people who dumpster dive do so from need, to supplement food from, or avoid stigma related to, social assistance programmes. However, it is increasingly common for food-secure people to choose to dumpster dive. We used participant observation and semi-structured interviews to characterise urban dumpster divers in Montréal, Quebec, identify what items they dive for, and describe their social connectivity. We found that while some divers identified as food insecure and extremely poor, most did not; primarily, divers were Caucasian, university students, holding an “alternative” identity, and without a full-time job or children. Divers required specialised knowledge and mostly recuperated food waste from grocery stores and bakeries (e.g. breads, fruits, vegetables, meat, dairy products) that significantly improved the composition and quality of their diets. Unused goods were largely gifted and rarely sold. Food-insecure divers tended to be isolated, while food-secure divers had strong social connections because they frequently exchanged knowledge and goods and held common values. Our findings indicate that the dumpster diving community in Montréal is a heterogeneous group recuperating a range of goods for a variety of reasons that reduces food waste and alleviates food insecurity. We suggest that municipal policy-makers encourage the redistribution of potentially useful goods between local businesses and willing recuperators.