Air pollution caused by opencast mining and its abatement measures in India.

Opencast mining dominates coal production in India. A survey was conducted to evaluate its local atmospheric impact. Emissions data were utilised to compute dust generation due to different mining activities. Work zone air quality, ambient air quality and seasonal variations are described revealing high pollution potential due to suspended particulate matter (SPM) and consequent impact on human health. Air pollution control measures involve planning and implementing a series of preventive and suppressive measures in addition to dust extraction systems. Different abatement measures are enumerated. Pollution control by trees, the tolerance of trees to different air pollutants and plant species useful for controlling pollution are also discussed. There is a need for wider application of dust control chemicals on haul roads. Sustainable management of pollution can be achieved by the proper implementation of suggested abatement measures.     

Air quality impact assessment of multiple open pit coal mines in northern Colombia

The coal mining region in northern Colombia is one of the largest open pit mining regions of the world. In 2009, there were 8 mining companies in operation with an approximate coal production of ～70 Mtons/year. Since 2007, the Colombian air quality monitoring network has reported readings that exceed the daily and annual air quality standards for total suspended particulate (TSP) matter and particles with an equivalent aerodynamic diameter smaller than 10 μm (PM??) in nearby villages. This paper describes work carried out in order to establish an appropriate clean air program for this region, based on the Colombian national environmental authority requirement for modeling of TSP and PM(10) dispersion. A TSP and PM?? emission inventory was initially developed, and topographic and meteorological information for the region was collected and analyzed. Using this information, the dispersion of TSP was modeled in ISC3 and AERMOD using meteorological data collected by 3 local stations during 2008 and 2009. The results obtained were compared to actual values measured by the air quality monitoring network. High correlation coefficients (>0.73) were obtained, indicating that the models accurately described the main factors affecting particle dispersion in the region. The model was then used to forecast concentrations of particulate matter for 2010. Based on results from the model, areas within the modeling region were identified as highly, fairly, moderately and marginally polluted according to local regulations. Additionally, the contribution particulate matter to the pollution at each village was estimated. Using these predicted values, the Colombian environmental authority imposed new decontamination measures on the mining companies operating in the region. These measures included the relocation of three villages financed by the mine companies based on forecasted pollution levels.     

Is Democracy Good for the Environment?

This paper presents empirical evidence to support the existence of a relationship between democracy and one aspect of environmental quality, urban air pollution. The relationship between environmental quality and democracy is explored empirically using a regression analysis of urban air concentrations of three pollutants, sulfur dioxide (SO₂), suspended particulate matter (SPM) and smoke, and two measures of democracy, the Freedom House Index and Polity III. The results suggest a significant and robust negative linear relationship between these pollutant concentrations and democracy level: the higher the level of democracy, the lower the ambient pollution level.     

Air pollution due to coal washery projects and its abatement measures

The demand for washed coal in India has led to the planning of washeries. The sources of air pollution in washeries are described is this paper. A number of new washeries are going to be installed within the vicinity of Jharia Coalfield in eastern India to fulfill the demand for washed coal. Air pollution monitoring was conducted at four coal washeries of Bharat Coking Coal Ltd. (BCCL). Methods adopted for selection of monitoring stations and sampling and analysis of ambient air quality are discussed. Suspended particulate matter (SPM) concentrations in an industrial area, a residential area, and a sensitive area such as a hospital were found to be high and to exceed the limit specified by the Indian Pollution Control Board. NO_x and SO₂ concentrations in some areas were also found to exceed the specified limits. A high percentage of respirable dust in SPM indicates a health hazard. Benzene-soluble material was found to be 40%, which can be fatal to human health. Suppression measures are discussed for dust, and control measures for air pollution in coal washeries are proposed.     

Environmental Kuznets Curve: the case of Bangladesh for waste emission and suspended particulate matter

Economists have shown the empirical relationships between the economic growth of a nation and its environmental quality using the hypothesis of the Environmental Kuznets Curve (EKC). To understand the EKC phenomena, a study of the literature was undertaken. As waste, waste emission, and suspended particulate matter (SPM) are the active agents of environmental degradation, the study focused on those agents for EKC consideration. Through understanding the different EKC trajectories, an attempt was made to relate the economic development of Bangladesh to the EKC. It is shown that the EKCs for waste, emissions from waste, and SPM follow the conventional EKC trajectory with a turning point related to higher income per capita in most cases. The type of economic policy that Bangladesh should follow to deal with the pollutants and their sources is also shown. The study recommends creating a tunnel in the EKC to lower the turning point in Bangladesh. The study is likely to help stimulate policy development in Bangladesh.     

Characteristics of coal mine ventilation air flows

Coal mine methane (CMM) is not only a greenhouse gas but also a wasted energy resource if not utilised. Underground coal mining is by far the most important source of fugitive methane emissions, and approximately 70% of all coal mining related methane is emitted to the atmosphere through mine ventilation air. Therefore, research and development on mine methane mitigation and utilisation now focuses on methane emitted from underground coal mines, in particular ventilation air methane (VAM) capture and utilisation. To date, most work has focused on the oxidation of very low concentration methane. These processes may be classified based on their combustion kinetic mechanisms into thermal oxidation and catalytic oxidation. VAM mitigation/utilisation technologies are generally divided into two basic categories: ancillary uses and principal uses. However, it is possible that the characteristics of ventilation air flows, for example the variations in methane concentration and the presence of certain compounds, which have not been reported so far, could make some potential VAM mitigation and utilisation technologies unfeasible if they cannot cope with the characteristics of mine site ventilation air flows. Therefore, it is important to understand the characteristics of mine ventilation air flows. Moreover, dust, hydrogen sulphide, sulphur dioxide, and other possible compounds emitted through mine ventilation air into the atmosphere are also pollutants. Therefore, this paper presents mine-site experimental results on the characteristics of mine ventilation air flows, including methane concentration and its variations, dust loadings, particle size, mineral matter of the dust, and other compounds in the ventilation air flows. The paper also discusses possible correlations between ventilation air characteristics and underground mining activities.     

Policy evaluation of vehicle exhaust standards in Japan from 1995 to 2005 based on two human health risk indices for air pollution and global warming

Measures for vehicle exhaust emissions aimed at reducing either air pollution or global warming could have counterproductive effects on one another. Increasing diesel passenger vehicles, which generally have lower CO₂ emissions than gasoline counterparts, leads to increasing particulate matter (PM) emissions, while gasoline has lower PM emissions than diesel. It is said that stringent limits on PM emission factors discourages improved CO₂ emission factors. Without including both effects in a risk evaluation, one cannot evaluate whether the total risk is reduced or not. Hence, we evaluated representative exhaust emission measures based on risk evaluation for both air pollution and global warming. Considering consumer choice between diesel and gasoline passenger vehicles and emissions standards adopted in Japan from 1995 to 2005, we built five cases for vehicle policy evaluation. For each case, we estimated disability-adjusted life years (DALY) as an index of human health risk caused by lung cancer linked to inhalation exposure of elemental carbon in PM as well as due to global warming linked to CO₂. The results of our risk evaluation reveal that the case adopting the 2005 new long-term Japanese emission standard reduces the human health risk caused by lung cancer due to air pollution by 0.6 × 10³ DALY, but would increase the risk due to global warming by 31.9 × 10³ DALY compared with the case of adopting EURO 4, for the same conditions of passenger vehicle choice from 1995. These results suggest that the characteristics of Japanese emissions standards are mainly designed to reduce air pollution.     

西宁市环境空气中TSP和PM10来源解析研究

在西宁市7个采样点分别采集了环境空气中的总悬浮颗粒物(TSP)和可吸入颗粒物(PM10),用化学质量平衡(CMB)受体模型和二重源解析技术解析了TSP和PM10的来源。结果表明:扬尘、煤烟尘和土壤风沙尘是造成该市TSP和PM10污染的主要源类。扬尘是造成该市颗粒物污染的首要因素,控制城市扬尘污染是城市环境空气颗粒物达标的关键。     

Assessment and management of air quality for an opencast coal mining area

A study for the assessment and management of the air quality was carried out at Lakhanpur area of Ib Valley Coalfield in Orissa state in India. The 24-h average concentrations of total suspended particulate (TSP) matter, respirable particulate matter (PM10), sulphur dioxide (SO2) and oxides of nitrogen (NOx) were monitored during 1 year period. Samplings were done at a regular interval through out the year at 13 monitoring stations in the residential areas and four monitoring stations in the mining/industrial areas. The 24-hr average TSP and PM10 concentrations ranged from 338.8 to 799.8 microg m(-3) and 102.5-425.6 microg m(-3) for industrial area, and 72.3-497.1 microg m(-3) and 40.8-171.9 microg m(-3) for residential area, respectively. During the study period 24-hr and annual average TSP and PM10 concentrations exceeded the respective standards set in the national ambient air quality standard (NAAQS) protocol at most residential and industrial areas. However, 24-hr and annual average concentrations of SO2 and NOx were well within the prescribed limit of NAAQS both in the residential and industrial areas. The annual and 24-hr average concentrations varied from 23.3 to 36.8 microg m(-3) and 16.0-55.2 microg m(-3) for SO2 and 23.9-41.9 microg m(-3) and 19.0-58.1 microg m(-3) for NOx, respectively. The temporal variations of TSP and PM10 fitted polynomial trend with an average correlation coefficient (R2) of 0.77 (+/-0.17) for TSP and 0.85 (+/-0.10) for PM10. On average the PM10 in the ambient air of the mining area constituted 31.94 (+/-1.76)% of the TSP. The linear regression correlation coefficient (R2) between TSP with PM10 and NOx with SO2 was 0.86 (+/-0.12) and 0.57 (+/-0.20), respectively. Maximal concentrations of TSP and PM10 occurred within the mining site based on the kriging technique. A management strategy is formulated for effective control of air pollution at source and other mitigative measures recommended including implementation of green belts around the sensitive areas where the concentration of air pollutants exceeded the standard limit.     

我国大气环境管理历程与展望

随着大气环境问题从煤烟型向以PM_2.5和O₃为特征的区域复合型污染演变，我国大气污染控制模式从以污染物排放浓度控制为核心、以污染物排放总量控制为核心逐渐走向以大气环境质量改善为核心。特别是近几年，全国各地在空气质量管理、科学精准治污等领域开展一系列积极的探索与实践，取得了显著成效。本文系统回顾了近50年来我国不同阶段大气环境管理工作的特点，重点梳理了2013年《大气污染防治行动计划》实施以来，空气质量管理经验与成绩，结合减污降碳总体部署对我国2035年“美丽中国建设目标基本实现”时的空气质量进行了展望，从PM_2.5与O₃协同控制的角度出发，提出了“十四五”期间我国大气环境管理的总体思路。     

Design of fuzzy synthetic evaluation model for air quality assessment

Little attention was paid to growing air quality concerns until about a decade earlier in India. Indian Government started continuous monitoring of the urban air quality in Taj corridor area to protect the heritage monuments like Agra Fort, Fatehpur Sikri, the bird sanctuary at Bharatpur National Park and also the human health associated with air pollution. The aim of this study was to address air quality assessment using fuzzy synthetic evaluation model. The model was designed for four air pollutants (sulphur dioxide, nitrogen dioxide, suspended particulate matters and respirable suspended particulate matter). In the present paper, an approach is demonstrated for the determination of fuzzy air quality index by aggregating the four pollutants. The model also considers the weights of individual pollutants during aggregation. The weights of individual pollutants were determined using analytical hierarchical process. The model was applied for air quality assessment in four monitoring stations situated in Taj Trapezium Zone.     

Urban air pollution and atmospheric diffusion research in China

Air pollution has become a serious problem in China as a result of that country's efforts in the last 30 years to become a great industrial power. The burning of coal, which currently provides over 70% of all China's energy needs, is a major source of air pollution. Because Chinese coal is high in sulfur and ash content and because most combustion devices in China have low efficiencies, SO₂ and particulate emissions are a serious problem and are comparable to or exceed those found in many countries that are much more industrialized. Although most coal is burned in North China, acid precipitation is most severe in South China because of the lack of buffering loess dust found in the former region.The Chinese government has already taken major steps to mitigate air pollution, such as relocating polluting industries, supplying coal with lower sulfur content, using gas instead of coal for residential heating, and levying fines on industries that exceed pollution standards. Atmospheric environmental impact assessment (AEIA) is also required for all major new projects. This article describes three types of mathematical diffusion models and field and wind-tunnel experiments that are used in such assessments.The Chinese authorities believe that a range of technological, managerial, locational, and behavioral changes must be effected before the air of Chinese cities can be significantly improved.     

Control strategies for vehicular NOx emissions in Guangzhou, China

Guangzhou is a city in southern China that has experienced very rapid economic development in recent years. The city's air has very high concentrations of various pollutants, including sulphur dioxide (SO₂), oxides of nitrogen (NOx), ozone (O₃) and particulate. This paper reviews the changes in air quality in the city over the past 15 years, and notes that a serious vehicular-related emissions problem has been superimposed on the traditional coal-burning problem evident in most Chinese cities. As NOx concentrations have increased, oxidants and photochemical smog now interact with the traditional SO₂ and particulate pollutants, leading to increased health risks and other environmental concerns.
Any responsible NOx control strategy for the city must include vehicle emission control measures. This paper reviews control strategies designed to abate vehicle emissions to fulfill the city's air quality improvement target in 2010. A cost-effectiveness analysis suggests that, while NOx emission control is expensive, vehicular emission standards could achieve a relatively sizable emissions reduction at reasonable cost. To achieve the 2010 air quality target of NOx, advanced implementation of EURO3 standards is recommended, substituting for the EURO2 currently envisioned in the national regulations. Related technical options, including fuel quality improvements and inspection/maintenance (I/M) upgrades (ASM or IM240), are assessed as well.     

泸州市主城区2019年3月至2020年2月大气颗粒物污染特征及防治对策研究

为了解泸州市主城区颗粒物污染变化特征及成因,选取2019年3月至2020年2月空气自动监测数据,运用Origin2017等技术手段对PM2.5与PM10的时间变化特征、污染来源方向以及污染物之间的相关性进行了分析。结果表明:PM2.5与PM10在不同季节的变化趋势均具有较好的一致性,不同站点污染物相关性特征明显。分析表明:泸州市主城区颗粒物污染成因为工业企业排放、机动车尾气、生物质燃烧、燃煤、扬尘以及不利气象条件等,建议对6类污染排放进行管控。     

Applying choice experiments to valuing the different types of environmental issues in Japan

In this study, improvements of different types of environmental issues in Japan, (i) reduction of mortality risk due to exposure to suspended particulate matter (SPM), (ii) improvement of the water quality of an urban river, and (iii) protection of goshawks, were evaluated in monetary terms using choice experiments. It was found that the reduction of mortality risk and the improvement of the water quality were highly valued, while residents did not place high value on the protection of goshawks. However, scope sensitivity was not observed in the evaluation of each issue and the presence of moral satisfaction was revealed. Excluding the effect of lexicographic choices could partly solve the problem concerning scope sensitivity. The results suggested that non-scope sensitive values that were unrelated to or inconsistent with the level of environmental improvement could be estimated through choice experiments in this research.     

Selenium distribution and fluxes in intertidal wetlands, San Francisco Bay, California

Selenium (Se) concentrations exceeding ecological guidelines for sediments and suspended particulate matter (SPM) have been observed in the northern reach of the San Francisco Bay estuary. Longterm availability of elevated Se in wetland sediments depends in part on the fluxes controlling Se distribution. The relative contribution of sedimentary vs. post-depositional Se fluxes in two San Francisco Bay intertidal wetlands was estimated. Selenium concentrations on surface wetland sediments were compared with levels on SPM, and with previously established background levels in San Francisco Bay sediments. Sediment Se fluxes to the wetlands were measured directly using sediment traps. Although dissolved Se concentrations are higher than particulate Se concentrations in San Francisco Bay water, sediment input into the system provides the major flux of Se. Strong correlation between Se and C on SPM (r2 = 0.81) indicates the importance of organic particulate deposition. Dependence on sediment texture was qualitatively established by measuring Se on particle-size separates. Normalization to Al showed that 65% of Se spatial variability is related to sediment texture. Selenium is further enriched in the marsh via post-depositional inputs, probably due to in situ adsorption from overlying water and chemical reduction. According to sediment flux measurements, enrichment in the marsh is equivalent to 20 to 25% of the particulate Se flux, thereby defining the marsh as a Se sink. These findings highlight the need for more intensive monitoring of SPM as the major source of Se to intertidal wetlands.     

Effect of ceramic industrial particulate emission control on key components of ambient PM10

The relationship between specific particulate emission control and ambient levels of some PM₁₀ components (Zn, As, Pb, Cs, Tl) was evaluated. To this end, the industrial area of Castellón (Eastern Spain) was selected, where around 40% of the EU glazed ceramic tiles and a high proportion of EU ceramic frits are produced. The PM₁₀ emissions from the ceramic processes were calculated over the period 2000–2006, taking into account the degree of implementation of corrective measures throughout the study period. Abatement systems were implemented in the majority of the fusion kilns for frit manufacture in the area as a result of the application of the Directive 1996/61/EC, leading to a marked decrease in PM₁₀ emissions. By contrast, emissions from tile manufacture remained relatively constant because of the few changes in the implementation of corrective measures. On the other hand, ambient PM₁₀ levels and composition measurements were carried out from 2002 to 2006. A high correlation between PM₁₀ emissions from frit manufacture and ambient levels of Zn, As, Pb and Cs (R² from 0.61 to 0.98) was observed. On the basis of these results, the potential impact of the implementation of corrective measures to reduce emissions from tile manufacture was quantified, resulting in a possible decrease of 3–5 μg/m³ and 2 μg/m³ in ambient mineral PM₁₀ (on an annual basis) in urban and suburban areas, respectively. This relatively simple methodology allows us to estimate the direct effect of a reduction in primary particulate emissions on ambient levels of key particulate components, and to make a preliminary quantification of the possibilities of air quality improvement by means of further emission reduction. Therefore, it is a useful tool for developing future air quality plans in the study area and in other industrialised areas.     

Identification of Sediment Sources in Forested Watersheds With Surface Coal Mining Disturbance Using Carbon and Nitrogen Isotopes1

Abstract: Sediments and soils were analyzed using stable carbon and nitrogen isotope ratio mass spectrometry and carbon and nitrogen elemental analyses to evaluate the their ability to indicate land‐use and land management disturbance and pinpoint loading from sediment transport sources in forested watersheds disturbed by surface coal mining. Samples of transported sediment particulate organic matter were collected from four watersheds in the Southern Appalachian forest region of southeastern Kentucky. The four watersheds had different surface coal mining history that were classified as undisturbed, active mining, and reclaimed conditions. Soil samples were analyzed including reclaimed grassland soils, undisturbed forest soils, geogenic organic matter associated with coal fragments in mining spoil, and soil organic matter from un‐mined grassland soils. Statistically significant differences were found for all biogeochemical signatures when comparing transported sediments from undisturbed watersheds and surface coal mining disturbed watersheds, and the results were attributed to differences in erosion sources and the presence of geogenic organic matter. Sediment transport sources in the surface coal mining watersheds were analyzed using Monte Carlo mass balance un‐mixing and it was found that: δ¹⁵N showed the ability to differentiate streambank erosion and surface soil erosion; and δ¹³C showed the ability to differentiate soil organic matter and geogenic organic matter. Results from the analyses suggest that streambank erosion downstream of surface coal mining sites is an especially significant source of sediment in coal mining disturbed watersheds. Further, the results suggest that the sediment transport processes governing streambank erosion loads are taking longer to reach geomorphologic equilibrium in the watershed as compared with the surface erosion processes. The dual‐isotope technique provides a useful method for further investigation of the impact of surface coal mining in the uplands of the watershed upon the geomorphologic state of the channel and the source of organic matter in aquatic systems impacted by surface coal mining.     

Traffic-related air quality assessment for open road tolling highway facility

Open road tolling (ORT) design has been considered as an effective means of smoothing highway traffic and reducing travel delay on toll highways. In this paper it is demonstrated that ORT can also achieve significant air quality benefits over the conventional toll plaza design. The near roadside carbon monoxide (CO) concentration levels can be reduced by up to 37%, and diesel particulate matter (DPM) emissions can decrease by as much as 58%. These large expected air quality benefits have great implications to the regional efforts of reducing mobile source air pollution toward achieving attainment status and healthier living environment.     

Technological reviews of particulate matter and their source identification techniques

Particulate matter (PM) is one of the primary pollutants produced from mining operations. This paper summarizes the existing techniques used to identify sources of PM and their contribution to ambient air pollution. Human health studies indicate that there is an association between airborne PM and adverse health effects. Particularly in coal mining areas, the burning of coal and PM from machinery operations cause low air quality that is physically harmful. Thus, the sources of smoldering combustion, that are typical in coal mine burns, increase the risk to mine workers who are exposed to high concentrations of known toxicity associated with PM. Recent studies on the modeling of PM concentration profiles across various sources were reviewed for this paper.