Environmental benefits from the use of the residual biomass in nurseries

Every year, nurseries waste about 40 t of residual biomass for each ha of potted plants cultivation. The European nursery sector deals with about 90,000 ha of cultivated land and 120,000 ha of nurseries, with a turnover of 19.8 billion Euros in 2011. In recent years, a number of Italian projects highlighted that GHG (greenhouse gas) emissions for the nursery sector range between 37 tCO₂eq/ha/year and 45 tCO₂eq/ha/year for potted plants, mainly due to the consumption of electric energy, plastics and peat. Moreover, other studies analyse the impacts associated to nurseries, recommending best practices for energy reductions and waste recycle or reuse. Therefore, the present work focused its attention to the possible environmental benefits associated to the reuse of residues (wood and substrate) of potted plants that are discarded from the nursery production chain. GHG emissions and fossil energy requirement were quantified by considering the CO₂eq (CO₂ equivalent) and the CER (cumulative energy requirement) respectively, in order to assess the environmental impacts of two different scenarios proposed for the materials recovery. Final results highlighted that the solutions which are able to recover the substrate and the wood allow impact reductions compared to landfill disposal. In particular, the scenario consisting in the immediate separation of the substrate from the root-plant system and the successive chipping of wood for energetic reuse, allows higher savings than those obtainable through shredding and subsequent wind separation. Moreover, for what concerns the CO₂eq, an adequate use of the residual biomass make it possible to compensate the GHG emissions of the nurseries up to 15%.     

基于混合生命周期评价模型的我国食物系统水资源消耗及二氧化碳排放核算

食物生产不仅依赖水资源,同时产生大量二氧化碳排放,这种资源环境影响存在于食物系统整个产业链。为促进食物系统节水降碳,本文构建了包含5大类共23种具体食物部门的混合生命周期评价模型,对各类食物系统的完全水资源消耗和二氧化碳排放进行了核算与比较。结果表明：①不同食物的水资源消耗和二氧化碳排放差异明显,动物性食物的平均水资源消耗和二氧化碳排放强度分别为植物性食物的1.9 ～ 15.0倍和1.9 ～ 2.7倍;②食物系统直接和间接水资源消耗占比较为接近,但二氧化碳排放主要源自上游产业链的间接排放,占比高达80.9%;③食物系统间接水资源消耗主要来自农业部门,而间接碳排放主要来自电力生产和供应业、基础化工原料制造业、非金属矿产品行业和交通运输业;④从营养元素供给看,动物性食物提供蛋白质和脂肪的资源环境影响高于植物性食物,蔬菜和主食分别在提供维生素C和碳水化合物上具有最小的环境成本。基于本文结果,食物系统节水应主要提高生产环节用水效率,而降碳则主要依靠上游产业减排,特别是发电和化肥生产等行业的协同节水减碳潜力。同时,本文结果也可为未来基于环境影响制定膳食指南提供数据支撑。     

Critical analysis of the waste management performance of two uranium production units in Brazil--part II: Caetite production center

This paper discusses the environmental waste management of the Heap-Leach Uranium Production Facility of Caetité located in a semi-arid region in Brazil. A comparison is made with the first uranium production site of the country located in Poços de Caldas. It is demonstrated that differences in the operational process along with different environmental conditions can lead to different impacts. In the present case groundwater is the potential most sensitive environmental medium despite the well-established consensus in the literature that radon and aerosol emissions may turn-out to be the most relevant environmental aspects of an installation located at this type of region. Most of the ²²⁶Ra content in the ore remains in the leached ore that is deposited with the waste rock. A lack in appropriate prediction of the hydrological balance has been causing unanticipated emissions of liquid effluents into the environment. Chemical treatment of this effluent may be needed. Contamination of groundwater in the short term by the waste ponds is not to be expected but it can be a relevant issue in the long term. As a consequence, careful closure schemes will need to be put in place. Finally, the overall costs with remediation in the Caetité production center are lower than those observed at the Poços de Caldas mining site.     

Environmental policy stringency,renewable energy consumption and CO2 emissions: Panel cointegration analysis for BRIICTS countries

ABSTRACT

The aim of this paper is to investigate the relationship between environmental policy stringency and CO₂ emissions in BRIICTS (Brazil, Russia, India, Indonesia, China, Turkey and South Africa) for the period 1993–2014 after controlling for renewable energy, fossil energy, oil prices and income. We believe that this is the first attempt to use the recently OECD-developed environmental policy stringency index to test the effectiveness of environmental stringency policy in reducing CO₂ emission in these countries. Applying the Panel Pooled Mean Group Autoregressive Distributive Lag (PMG-ARDL) estimator, we found an inverted U–shaped relationship between environmental policy stringency and CO₂ emissions. This suggests that initially strict stringent environmental policy does not lead to improvements in the environment but after a certain level or a threshold point, environmental stringency policy leads to improvement in environmental quality. Renewable energy consumption was negatively related to CO₂ emissions while fossil energy consumption and real oil prices and income were positively and significantly related to CO₂. Our findings suggest that strengthening the stringency of environmental policies and promoting renewable energy are effective ways of preventing environmental degradation in BRIICTS countries.     

Environmental impacts of absorption-based CO2 capture unit for post-combustion treatment of flue gas from coal-fired power plant

This study assesses potential environmental impacts of the absorption-based carbon dioxide (CO₂) capture unit that is integrated to coal-fired power plant for post-combustion treatment of flue gas. The assessment was performed by identifying potential pollutants and their sources as well as amounts of emissions from the CO₂ capture unit and also by reviewing toxicology, potential implications to human health and the environment, as well as the environmental laws and regulations associated with such pollutants. The assessment shows that, while offering a significant environmental benefit through a reduction of greenhouse gas emissions, the installation of CO₂ capture units for post-combustion treatment might induce unintentional and potential burdens to human health and the environment through four emission pathways, including treated gas, process wastes, fugitive emissions, and accidental releases. Such burdens nevertheless can be predetermined and properly mitigated through a well-established environmental management program and mitigation measures. Recommendations to minimize these impacts are provided in this paper.     

Unveiling the liaison between human capital,trade openness,and environmental sustainability for BRICS economies: Robust panel-data estimation

Global warming and greenhouse gas emissions pose severe threats to environmental sustainability. A sustainable environment is a prerequisite for long-term socioeconomic growth and human survival. Green technology is brought about by a country's economic and financial openness, and education provides knowledge to the public and labor, contributing to environmental sustainability. Thus, this research aims to unveil the liaison between human capital, trade openness, and environmental quality for Russia, Brazil, India, China, and South Africa (BRICS) countries from 1998 to 2018. Several econometric methods, including the Driscoll–Kraay standard errors and the Dumitrescu–Hurlin causality approaches, reveal long-run and causal relationships among the modelled indicators. The Driscoll–Kraay standard error results show that human capital is negatively related to carbon dioxide emissions (CO₂ emissions). Imposing high tariffs and excise duties, changing tax structures, discouraging the inflow of polluted commodities, and encouraging green trade can help BRICS combat high environmental pollution. The results show that a one-point increase in human capital in models 1 and 2 can reduce CO₂ emissions by 1.5279 and 0.1538 points, respectively. In contrast, a 1% growth in trade can lead to a rise in CO₂ emissions of 0.3731% and 0.2384%, respectively. Similarly, financial development and energy consumption result in high CO₂ emissions in the long run. Moreover, a feedback effect of the human capital index on CO₂ emissions is discovered. As a result of the findings, the government and responsible authorities should provide financial support and encourage investments in the region's energy-resourceful and sustainable green projects.     

Energy and CO2 from high performance recycled aggregate production

The use of recycled concrete aggregates (RCA) in applications other than road sub-layers is limited by two factors: the high porosity of RCA in comparison with natural aggregates, and the restrictions set forth in standards and building codes. Research efforts aimed at alleviating these restrictions are focused on improving the quality of coarse RCAs by reducing the amount of adhered cement pastes, which is the weakest element in this system and influences the rheological behaviour.This paper presents an analysis of the environmental impacts of the recent mechanical and thermo-mechanical processing techniques which produce high performance RCA by reducing the volume of adhered cement paste. Based on published data, processing scenarios were established. These scenarios permit making rough estimates of energy consumption, CO₂ emissions, fines generation and product quality. Using these data and the available emission factors from several countries, an objective comparison was made between these innovating processes and conventional recycling.The production of fines increases from 40% up to as much as 70% as the volume of adhered cement paste on the RCA is reduced. Fuel fed thermo-mechanical process energy consumption, per tonne of recycled aggregate, varies between 36 and 62 times higher than conventional recycling processes. Mechanical processing, combined with microwave heating, increases energy consumption from 3 to a little more than 4 times conventional recycling. Consequently, CO₂ emissions released by conventional coarse aggregate production go from 1.5 to 4.5 kgCO₂/t, to around 200 kgCO₂/t, for that of fossil fuel fed thermo-mechanical treatments.Mechanical and mechanical/microwave treatments appear to have the greatest environmental potential. Notwithstanding, the further development of markets for fines is crucial for reducing environmental loads.     

减污降碳协同增效的关键路径与政策研究

全面推动实现减污降碳协同增效是新发展阶段我国兑现碳达峰碳中和庄严承诺、深入打好污染防治攻坚战、建设美丽中国的必然要求。环境污染物与二氧化碳排放的高度同源性是实现减污降碳协同增效的理论基础。本文首先就目标指标、管控区域、控制对象、措施任务、政策工具五个方面的协同性系统讨论了减污降碳协同增效的基本内涵。其次，着眼于当前大气环境治理与碳减排在中国的重要性，本文在国家层面讨论了二者的中长期协同控制路线图，阐述了重点协同区域的识别方法和重点部门的协同治理思路，系统提出了大气环境治理与碳减排的协同路径。再次，本文还就“无废城市”建设和生态保护这两个领域与碳减排的协同治理思路展开分析讨论。最后，针对减污降碳协同治理对政策体系的需求，提出了统筹优化减污降碳协同目标、建立协同法规标准、建立减污降碳协同管理制度三个方面的建议。本研究将有助于厘清各方对减污降碳协同增效的认识，对各级政府后续推进减污降碳协同治理工作提供理论和科学基础。     

Life cycle assessment of natural gas combined cycle power plant with post-combustion carbon capture,transport and storage

Hybrid life cycle assessment has been used to assess the environmental impacts of natural gas combined cycle (NGCC) electricity generation with carbon dioxide capture and storage (CCS). The CCS chain modeled in this study consists of carbon dioxide (CO₂) capture from flue gas using monoethanolamine (MEA), pipeline transport and storage in a saline aquifer.Results show that the sequestration of 90% CO₂ from the flue gas results in avoiding 70% of CO₂ emissions to the atmosphere per kWh and reduces global warming potential (GWP) by 64%. Calculation of other environmental impacts shows the trade-offs: an increase of 43% in acidification, 35% in eutrophication, and 120–170% in various toxicity impacts. Given the assumptions employed in this analysis, emissions of MEA and formaldehyde during capture process and generation of reclaimer wastes contributes to various toxicity potentials and cause many-fold increase in the on-site direct freshwater ecotoxicity and terrestrial ecotoxicity impacts. NO_x from fuel combustion is still the dominant contributor to most direct impacts, other than toxicity potentials and GWP. It is found that the direct emission of MEA contribute little to human toxicity (HT < 1%), however it makes 16% of terrestrial ecotoxicity impact. Hazardous reclaimer waste causes significant freshwater and marine ecotoxicity impacts. Most increases in impact are due to increased fuel requirements or increased investments and operating inputs.The reductions in GWP range from 58% to 68% for the worst-case to best-case CCS system. Acidification, eutrophication and toxicity potentials show an even large range of variation in the sensitivity analysis. Decreases in energy use and solvent degradation will significantly reduce the impact in all categories.     

浙江省环境污染与经济发展关系的实证研究

本文在环境库兹涅茨曲线假设基础上,采用1991—2014年浙江省环境和经济数据,运用回归模型对其环境污染与经济发展的关系进行实证检验。结果表明:浙江工业废水、工业废气、工业SO2排放量和工业固体废弃物产生量均符合EKC假设,其中工业SO2和工业废水人均排放量与人均GDP呈倒U形关系,拐点分别出现在2005年与2010年;工业废气排放量和工业固体废弃物产生量尚处于倒U形左侧上升阶段,其中工业固体废弃物人均产生量已接近拐点。而生活污水排放量与EKC假设并不相符,人均生活污水排放量与人均GDP呈单调递增的线形关系。对EKC驱动因子的分析表明,加强政府环境治理,以不断完善的环境法规推动产业结构升级调整,以持续的技术进步与创新促进关键行业节能减排,有利于克服规模效应,推动浙江环境污染与经济发展的关系早日实现解耦。     

The life cycle of rice: LCA of alternative agri-food chain management systems in Vercelli (Italy)

The Vercelli rice district in northern Italy plays a key role in the agri-food industry in a country which accounts for more than 50% of the EU rice production and exports roughly 70%. However, although wealth and jobs are created, the sector is said to be responsible for environmental impacts that are increasingly being perceived as topical. As a complex and comprehensive environmental evaluation is necessary to understand and manage the environmental impact of the agri-food chain, the Life Cycle Assessment (LCA) methodology has been applied to the rice production system: from the paddy field to the supermarket. The LCA has pointed out the magnitude of impact per kg of delivered white milled rice: a CO_2eq emission of 2.9 kg, a primary energy consumption of 17.8 MJ and the use of 4.9 m³ of water for irrigation purposes. Improvement scenarios have been analysed considering alternative rice farming and food processing methods, such as organic and upland farming, as well as parboiling. The research has shown that organic and upland farming have the potential to decrease the impact per unit of cultivated area. However, due to the lower grain yields, the environmental benefits per kg of the final products are greatly reduced in the case of upland rice production and almost cancelled for organic rice. LCA has proved to be an effective tool for understanding the eco-profile of Italian rice and should be used for transparent and credible communication between suppliers and their customers.     

Toward sustainable use of natural resources: Nexus between resource rents,affluence, energy intensity and carbon emissions in developing and transition economies

Sustainable use of natural resources would entail ensuring that derived economic benefits today do not undermine the welfare of generations to come. On this basis, this study examines the nexus between natural resource rents and carbon dioxide (CO₂) emissions disaggregated into production and consumption-based (i.e., trade-adjusted) CO₂ emissions for a selected panel of 45 developing and transition economies over the period 1995–2017. The empirical model also incorporates the impacts of population, affluence, and energy intensity. The results show that affluence increases production-based CO₂ emissions by 1.407%, with the EKC's predicted inverted U-shaped curve only explaining consumption-based CO₂ emissions. Economic reliance on natural resource rents and energy intensification contribute 0.022% and 0.766%, respectively, to CO₂ emissions embedded in territorial production inventories and 0.035% and 0.583%, respectively, to CO₂ emissions embedded in consumption inventories. The bootstrap non-causality test shows that historical data on each variable has significant predictive power for future CO₂ emissions from both sources. The historical information about natural resource rents has significant predictive power over the future levels of affluence and energy intensity. Clearly, the results show that the environmental impact of natural resource rents is stronger when CO₂ emissions are adjusted for trade and varies among the countries, with Bangladesh, Guinea, India, Malaysia, Mexico, Nigeria, Pakistan, Saudi Arabia, Vietnam, and Zimbabwe among the most affected countries. Overall, this study provides motivation for policies to keep the use of natural resources within sustainable limits.     

Environmental consequences of recycling aluminum old scrap in a global market

Nowadays, aluminum scrap is traded globally. This has increased the need to analyze the flows of aluminum scrap, as well as to determine the environmental consequences from aluminum recycling. The objective of this work is to determine the greenhouse gases (GHG) emissions of the old scrap collected and sorted for recycling, considering the market interactions. The study focused on Spain as a representative country for Europe. We integrate material flow analysis (MFA) with consequential life cycle assessment (CLCA) in order to determine the most likely destination for the old scrap and the most likely corresponding process affected. Based on this analysis, it is possible to project some scenarios and to quantify the GHG emissions (generated and avoided) associated with old scrap recycling within a global market. From the MFA results, we projected that the Spanish demand for aluminum products will be met mainly with an increase in primary aluminum imports, and the excess of old scrap not used in Spain will be exported in future years, mainly to Asia. Depending on the scenario and on the marginal source of primary aluminum considered, the GHG emission estimates varied between −18,140 kg of CO₂ eq. t⁻¹ and −8427 of CO₂ eq. t⁻¹ of old scrap collected. More GHG emissions are avoided with an increase in export flows, but the export of old scrap should be considered as the loss of a key resource, and in the long term, it will also affect the semifinished products industry. Mapping the flows of raw materials and waste, as well as quantifying the GHG impacts derived from recycling, has become an essential prerequisite to consistent development from a linear toward a circular economy (CE).     

Environmental regulatory failure and metal contamination at the Giap Lai pyrite mine, Northern Vietnam

The causes for the failure in enforcement of environmental regulations at the Giap Lai pyrite mine in northern Vietnam are considered and the environmental impacts that are associated with this mine are evaluated. It is shown that sulphide-rich tailings and waste rock in the mining area represent significant sources of acid rock drainage (ARD). The ARD is causing elevated metal levels in downstream water bodies, which in turn, represent a threat to both human health and to aquatic ecosystems. Metal concentrations in impacted surface waters have increased after mine closure, suggesting that impacts are becoming progressively more serious. No post-closure, remediation measures have been applied at the mine, in spite of the existence of environmental legislation and both central and regional institutions charged with environmental supervision and control. The research presented here provides further emphasis for the recommendation that, while government institutions may need to be strengthened, and environmental regulations need to be in place, true on the ground improvement in environmental quality in Vietnam and in many other developing countries require an increased focus on promoting public awareness of industrial environmental issues.     

An analysis of the use of life cycle assessment for waste co-incineration in cement kilns

Life cycle assessment, LCA, has become a key methodology to evaluate the environmental performance of products, services and processes and it is considered a powerful tool for decision makers. Waste treatment options are frequently evaluated using LCA methodologies in order to determine the option with the lowest environmental impact. Due to the approximate nature of LCA, where results are highly influenced by the assumptions made in the definition of the system, this methodology has certain non-negligible limitations. Because of that, the use of LCA to assess waste co-incineration in cement kilns is reviewed in this paper, with a special attention to those key inventory results highly dependent on the initial assumptions made. Therefore, the main focus of this paper is the life cycle inventory, LCI, of carbon emissions, primary energy and air emissions. When the focus is made on cement production, a tonne of cement is usually the functional unit. In this case, waste co-incineration has a non-significant role on CO₂ emissions from the cement kiln and an important energy efficiency loss can be deduced from the industry performance data, which is rarely taken into account by LCA practitioners. If cement kilns are considered as another waste treatment option, the functional unit is usually 1 t of waste to be treated. In this case, it has been observed that contradictory results may arise depending on the initial assumptions, generating high uncertainty in the results. Air emissions, as heavy metals, are quite relevant when assessing waste co-incineration, as the amount of pollutants in the input are increased. Constant transfer factors are mainly used for heavy metals, but it may not be the correct approach for mercury emissions.     

Life cycle assessment of Italian citrus-based products. Sensitivity analysis and improvement scenarios

Though many studies concern the agro-food sector in the EU and Italy, and its environmental impacts, literature is quite lacking in works regarding LCA application on citrus products. This paper represents one of the first studies on the environmental impacts of citrus products in order to suggest feasible strategies and actions to improve their environmental performance. In particular, it is part of a research aimed to estimate environmental burdens associated with the production of the following citrus-based products: essential oil, natural juice and concentrated juice from oranges and lemons. The life cycle assessment of these products, published in a previous paper, had highlighted significant environmental issues in terms of energy consumption, associated CO₂ emissions, and water consumption. Starting from such results the authors carry out an improvement analysis of the assessed production system, whereby sustainable scenarios for saving water and energy are proposed to reduce environmental burdens of the examined production system. In addition, a sensitivity analysis to estimate the effects of the chosen methods will be performed, giving data on the outcome of the study. Uncertainty related to allocation methods, secondary data sources, and initial assumptions on cultivation, transport modes, and waste management is analysed. The results of the performed analyses allow stating that every assessed eco-profile is differently influenced by the uncertainty study. Different assumptions on initial data and methods showed very sensible variations in the energy and environmental performances of the final products. Besides, the results show energy and environmental benefits that clearly state the improvement of the products eco-profile, by reusing purified water use for irrigation, using the railway mode for the delivery of final products, when possible, and adopting efficient technologies, as the mechanical vapour recompression, in the pasteurisation and concentration of juice.     

Life cycle assessment of a pulverized coal power plant with post-combustion capture, transport and storage of CO2

In this study the methodology of life cycle assessment has been used to assess the environmental impacts of three pulverized coal fired electricity supply chains with and without carbon capture and storage (CCS) on a cradle to grave basis. The chain with CCS comprises post-combustion CO₂ capture with monoethanolamine, compression, transport by pipeline and storage in a geological reservoir. The two reference chains represent sub-critical and state-of-the-art ultra supercritical pulverized coal fired electricity generation. For the three chains we have constructed a detailed greenhouse gas (GHG) balance, and disclosed environmental trade-offs and co-benefits due to CO₂ capture, transport and storage. Results show that, due to CCS, the GHG emissions per kWh are reduced substantially to 243 g/kWh. This is a reduction of 78 and 71% compared to the sub-critical and state-of-the-art power plant, respectively. The removal of CO₂ is partially offset by increased GHG emissions in up- and downstream processes, to a small extent (0.7 g/kWh) caused by the CCS infrastructure. An environmental co-benefit is expected following from the deeper reduction of hydrogen fluoride and hydrogen chloride emissions. Most notable environmental trade-offs are the increase in human toxicity, ozone layer depletion and fresh water ecotoxicity potential for which the CCS chain is outperformed by both other chains. The state-of-the-art power plant without CCS also shows a better score for the eutrophication, acidification and photochemical oxidation potential despite the deeper reduction of SO_x and NO_x in the CCS power plant. These reductions are offset by increased emissions in the life cycle due to the energy penalty and a factor five increase in NH₃ emissions.     

The potential contribution of sustainable waste management to energy use and greenhouse gas emission reduction in the Netherlands

Future limitations on the availability of selected resources stress the need for increased material efficiency. In addition, in a climate-constrained world the impact of resource use on greenhouse gas emissions should be minimized. Waste management is key to achieve sustainable resource management. Ways to use resources more efficiently include prevention of waste, reuse of products and materials, and recycling of materials, while incineration and anaerobic digestion may recover part of the embodied energy of materials. This study used iWaste, a simulation model, to investigate the extent to which savings in energy consumption and CO₂ emissions can be achieved in the Netherlands through recycling of waste streams versus waste incineration, and to assess the extent to which this potential is reflected in the LAP2 (currently initiated policy). Three waste streams (i.e. household waste, bulky household waste, and construction and demolition waste) and three scenarios compare current policy to scenarios that focus on high-quality recycling (Recycling+) or incineration with increased efficiency (Incineration+). The results show that aiming for more and high-quality recycling can result in emission reductions of 2.3 MtCO₂ annually in the Netherlands compared to the reference situation in 2008. The main contributors to this reduction potential are found in optimizing the recycling of plastics (PET, PE and PP), textiles, paper, and organic waste. A scenario assuming a higher energy conversion efficiency of the incinerator treating the residual waste stream, achieves an emission reduction equivalent to only one third (0.7 MtCO₂/year) of the reduction achieved in the Recycling+ scenario. Furthermore, the results of the study show that currently initiated policy only partially realizes the full potential identified. A focus on highest quality use of recovered materials is essential to realize the full potential energy and CO₂ emission reduction identified for the Netherlands. Detailed economic and technical analyses of high quality recycling are recommended to further evaluate viable integrated waste management policies.     

Cement replacement by sugar cane bagasse ash: CO2 emissions reduction and potential for carbon credits

This paper presents a study of cement replacement by sugar cane bagasse ash (SCBA) in industrial scale aiming to reduce the CO₂ emissions into the atmosphere. SCBA is a by-product of the sugar/ethanol agro-industry abundantly available in some regions of the world and has cementitious properties indicating that it can be used together with cement. Recent comprehensive research developed at the Federal University of Rio de Janeiro/Brazil has demonstrated that SCBA maintains, or even improves, the mechanical and durability properties of cement-based materials such as mortars and concretes. Brazil is the world’s largest sugar cane producer and being a developing country can claim carbon credits. A simulation was carried out to estimate the potential of CO₂ emission reductions and the viability to issue certified emission reduction (CER) credits. The simulation was developed within the framework of the methodology established by the United Nations Framework Convention on Climate Change (UNFCCC) for the Clean Development Mechanism (CDM). The State of São Paulo (Brazil) was chosen for this case study because it concentrates about 60% of the national sugar cane and ash production together with an important concentration of cement factories. Since one of the key variables to estimate the CO₂ emissions is the average distance between sugar cane/ethanol factories and the cement plants, a genetic algorithm was developed to solve this optimization problem. The results indicated that SCBA blended cement reduces CO₂ emissions, which qualifies this product for CDM projects.