Hazardous waste, impact on health and environment for development of better waste management strategies in future in India

Industry has become an essential part of modern society, and waste production is an inevitable outcome of the developmental activities. A material becomes waste when it is discarded without expecting to be compensated for its inherent value. These wastes may pose a potential hazard to the human health or the environment (soil, air, water) when improperly treated, stored, transported or disposed off or managed. Currently in India even though hazardous wastes, emanations and effluents are regulated, solid wastes often are disposed off indiscriminately posing health and environmental risk. In view of this, management of hazardous wastes including their disposal in environment friendly and economically viable way is very important and therefore suggestions are made for developing better strategies. Out of the various categories of the wastes, solid waste contributes a major share towards environmental degradation. The present paper outlines the nature of the wastes, waste generating industries, waste characterization, health and environmental implications of wastes management practices, steps towards planning, design and development of models for effective hazardous waste management, treatment, approaches and regulations for disposal of hazardous waste. Appraisal of the whole situation with reference to Indian scenario is attempted so that a better cost-effective strategies for waste management be evolved in future.     

Chemical contaminants in feedlot wastes: concentrations, effects and attenuation

Commercial feedlots for beef cattle finishing are potential sources of a range of trace chemicals which have human health or environmental significance. To ensure adequate protection of human and environmental health from exposure to these chemicals, the application of effective manure and effluent management practices is warranted. The Australian meat and livestock industry has adopted a proactive approach to the identification of best management practices. Accordingly, this review was undertaken to identify key chemical species that may require consideration in the development of guidelines for feedlot manure and effluent management practices in Australia. Important classes of trace chemicals identified include steroidal hormones, antibiotics, ectoparasiticides, mycotoxins, heavy metals and dioxins. These are described in terms of their likely sources, expected concentrations and public health or environmental significance based on international data and research. Androgenic hormones such as testosterone and trenbolone are significantly active in feedlot wastes, but they are poorly understood in terms of fate and environmental implications. The careful management of residues of antibiotics including virginiamycin, tylosin and oxytetracycline appears prudent in terms of minimising the risk of potential public health impacts from resistant strains of bacteria. Good management of ectoparasiticides including synthetic pyrethroids, macrocyclic lactones, fluazuron, and amitraz is important for the prevention of potential ecological implications, particularly towards dung beetles. Very few of these individual chemical contaminants have been thoroughly investigated in terms of concentrations, effects and attenuation in Australian feedlot wastes.     

An approach to comparative assessments of potential health risks from exposure to radionuclides and hazardous chemicals

The need to compare potential health risks to the public associated with different activities that can result in releases of hazardous substances to the environment is becoming increasingly important in decision-making. In making such comparisons, it is desirable to use equivalent indicators of potential health risks for radionuclides, chemical carcinogens, and noncarcinogenic hazardous chemicals. Current approaches to risk assessment that were developed for purposes of protecting human health do not provide equivalent indicators of potential risks from exposure to radionuclides and hazardous chemicals. Comparisons of environmental concentrations or calculated exposures or risks with standards for protection of public health also do not provide equivalent indicators of potential risks. We propose a simple approach to comparative risk assessments in which calculated exposures to any hazardous substances are expressed relative to no-observed-effect levels (NOELs) or, preferably, lower confidence limits of benchmark doses (BMDLs) in humans. This approach provides an equivalent, science-based indicator of the relative risks posed by different exposures to any hazardous substances.     

Measuring combined exposure to environmental pressures in urban areas: an air quality and noise pollution assessment approach

This study presents a methodological scheme developed to provide a combined air and noise pollution exposure assessment based on measurements from personal portable monitors. Provided that air and noise pollution are considered in a co-exposure approach, they represent a significant environmental hazard to public health. The methodology is demonstrated for the city of Thessaloniki, Greece. The results of an extensive field campaign are presented and the variations in personal exposure between modes of transport, routes, streets and transport microenvironments are evaluated. Air pollution and noise measurements were performed simultaneously along several commuting routes, during the morning and evening rush hours. Combined exposure to environmental pollutants is highlighted based on the Combined Exposure Factor (CEF) and Combined Dose and Exposure Factor (CDEF). The CDEF takes into account the potential relative uptake of each pollutant by considering the physical activities of each citizen. Rather than viewing environmental pollutants separately for planning and environmental sustainability considerations, the possibility of an easy-to-comprehend co-exposure approach based on these two indices is demonstrated. Furthermore, they provide for the first time a combined exposure assessment to these environmental pollutants for Thessaloniki and in this sense they could be of importance for local public authorities and decision makers. A considerable environmental burden for the citizens of Thessaloniki, especially for VOCs and noise pollution levels is observed. The material herein points out the importance of measuring public health stressors and the necessity of considering urban environmental pollution in a holistic way.     

Regional risk assessment for contaminated sites Part 3: Spatial decision support system

Large scale (e.g. regional or national) assessments of contaminated sites may be very costly in terms of investigation and methodological (i.e. risk assessment procedures) requirements and may produce a quantity of information that usually discourages examination by decision-makers. Moreover, most of the existing tools effectively support local environmental risk assessment and management, but lack the capabilities of larger scale analysis, not mentioning the absence of the relevant component of socio-economic prioritization. To respond to the concerns and the management needs of experts and decision makers, the Spatial decision support sYstem for Regional rIsk Assessment of Degraded land (SYRIADE DSS) was developed and is presented according to its three modules: Regional Risk Assessment, Socio-economic Assessment and Integrated Assessment, respectively. The system allows to rank potentially contaminated sites for priority of investigation, when no information on characterization and risk by site specific methodologies is available. This GIS-based system embeds an innovative spatial and relative risk assessment procedure, and proposes the integrated analysis of different data (environmental and socio-economic) for the concerned sites, eliciting when necessary experts' knowledge and stakeholders' values (through Multi Criteria Decision Analysis, MCDA, methodologies). The application to a Polish case-study shows the performance and the flexibility of the system in investigating and mapping (potentially) contaminated sites at the regional scale.     

A systemic health risk assessment for the chromium cycle in Taiwan

Health risk assessment (HRA) has been recognized as a useful tool for identifying health risks of human activities. In particular, this method has been well applied to spatially defined units, such as a production plant, a treatment facility, and a contaminated site. However, the management strategies based on the risk information will be more efficient if the comprehensive picture of total risks from all kinds of sources is depicted. In principle, the total risks can be obtained when all risk sources are assessed individually. Apparently, this approach demands huge amount of efforts. This study develops a methodology that combines substance flow and risk estimation to facilitate examination of risk in a systemic way and provide comprehensive understanding of risk generation and distribution corresponding to flows of substances in the anthroposphere and the environment. Substance flow analysis (SFA) and HRA method is integrated to produce a systemic risk assessment method, from which substance management schemes can be derived. In this study, the chromium cycle in Taiwan is used as an example to demonstrate the method, by which the associated substance flow in the economy and the risk caused by the substance in the environmental system is determined. The concentrations of pollutants in the environmental media, the resultant risks and hazard quotients are calculated with the widely-used CalTOX multimedia model.     

Health and environmental costs of pesticide use in vegetable farming in Nepal

There is a growing concern of pesticide risks to human health, natural environment and ecosystems. Many previous economic valuations have accounted health aspects or environmental components, but rarely combined; thus, overall risk assessment is partially distorted. The study, conducted close to the capital of Nepal, addressed the health effects of pesticides on small-scale farmers and evaluated the monetary risks of pesticide use on human health and environmental resources. We also aim to establish the relationships among valuation methods. The paper adopts cost of illness, defensive expenditure and contingent valuation willingness to pay approach. The study concluded that the methods used for valuing pesticide risks to human and environmental health are theoretically consistent. The exposed individuals are likely to bear significant economic costs of exposures depending on geographical location, pesticide use magnitudes and frequency. Individuals are willing to pay between 53 and 79% more than the existing pesticide price to protect their health and environment. The integrated pest management training is less likely to reduce health costs of pesticide exposure, although it leads to higher investment in safety measures.     

GRADE: Assessing the quality of evidence in environmental and occupational health

There is high demand in environmental health for adoption of a structured process that evaluates and integrates evidence while making decisions and recommendations transparent. The Grading of Recommendations Assessment, Development and Evaluation (GRADE) framework holds promise to address this demand. For over a decade, GRADE has been applied successfully to areas of clinical medicine, public health, and health policy, but experience with GRADE in environmental and occupational health is just beginning. Environmental and occupational health questions focus on understanding whether an exposure is a potential health hazard or risk, assessing the exposure to understand the extent and magnitude of risk, and exploring interventions to mitigate exposure or risk. Although GRADE offers many advantages, including its flexibility and methodological rigor, there are features of the different sources of evidence used in environmental and occupational health that will require further consideration to assess the need for method refinement. An issue that requires particular attention is the evaluation and integration of evidence from human, animal, in vitro, and in silico (computer modeling) studies when determining whether an environmental factor represents a potential health hazard or risk. Assessment of the hazard of exposures can produce analyses for use in the GRADE evidence-to-decision (EtD) framework to inform risk-management decisions about removing harmful exposures or mitigating risks. The EtD framework allows for grading the strength of the recommendations based on judgments of the certainty in the evidence (also known as quality of the evidence), as well as other factors that inform recommendations such as social values and preferences, resource implications, and benefits. GRADE represents an untapped opportunity for environmental and occupational health to make evidence-based recommendations in a systematic and transparent manner. The objectives of this article are to provide an overview of GRADE, discuss GRADE's applicability to environmental health, and identify priority areas for method assessment and development.     

Applicability of risk-based management and the need for risk-based economic decision analysis at hazardous waste contaminated sites

Decision analysis in subsurface contamination management is generally carried out through a traditional engineering economic viewpoint. However, new advances in human health risk assessment, namely, the probabilistic risk assessment, and the growing awareness of the importance of soft data in the decision-making process, require decision analysis methodologies that are capable of accommodating non-technical and politically biased qualitative information. In this work, we discuss the major limitations of the currently practiced decision analysis framework, which evolves around the definition of risk and cost of risk, and its poor ability to communicate risk-related information. A demonstration using a numerical example was conducted to provide insight on these limitations of the current decision analysis framework. The results from this simple ground water contamination and remediation scenario were identical to those obtained from studies carried out on existing Superfund sites, which suggests serious flaws in the current risk management framework. In order to provide a perspective on how these limitations may be avoided in future formulation of the management framework, more matured and well-accepted approaches to decision analysis in dam safety and the utility industry, where public health and public investment are of great concern, are presented and their applicability in subsurface remediation management is discussed. Finally, in light of the success of the application of risk-based decision analysis in dam safety and the utility industry, potential options for decision analysis in subsurface contamination management are discussed.     

A review of regulatory decisions for environmental protection: part I - challenges in the implementation of national soil policies

Since many soil studies have already revealed the possible risks to human health and the environment arising from contaminated soils it is therefore crucial to preserve soil quality under current and future conditions. In the last three decades a number of countries already introduced national policies and practices for the management of contaminated sites, and in 2002, an EU Thematic Strategy for Soil Protection was proposed by the European Commission. In this paper we review and analyse several national contaminated land policy regimes already in place in order to assess common elements and to identify specific needs in the development of national soil policies. We propose a framework that combines the D-P-S-I-R structure of policy evaluation with the Source-Pathway-Receptor approach to health risk assessment to support the development of effective country specific regulatory decisions for managing contaminated land in countries where these are yet to be implemented. The framework proposed allows decision makers to effectively use available information and to identify existing data gaps. As a result it is apparent that while there are technical aspects of site characterisation, risk assessment and remediation processes that could be commonly implemented at an EU level there are certain trans-scientific aspects that require political choices and need to be customized by EU Member States.     

Practical consequences of the assessment of different energy health risks

Public authorities must make decisions about energy, and the risks of alternative strategies need to be calculated including health and environmental costs. Information from various sources must be organized into a logical framework for comparing impacts. This must include the widest practicable range of health and environmental damage — public-health impact of pollution, role of accidents, disease and hazardous materials in the workplace, and odds for catastrophes. It must put each part of the energy cycle into perspective-giving particular attention to uncertainties in knowledge - to convey what is known, what is uncertain, and the importance of each factor in the overall picture. This paper gives examples of the use of health-impact assessment by decisionmakers: (1) comparative risk assessment of the health effects of coal and nuclear fuel cycles used in nuclear power plant siting and licensing hearings, and (2) health risks of acid deposition and other air-transported pollutants, carried out as part of an assessment for the U.S. Congress Office of Technology Assessment.     

The analysis of human health risk with a detailed procedure operating in a GIS environment

An approach for quantifying the human health risk caused by industrial sources, which, daily or accidentally, emit dangerous pollutants able to impact on different environmental media, is introduced. The approach is performed by the HHRA-GIS tool which employs an integrated, multimedia, multi-exposure pathways and multi-receptors risk assessment model able to manage all the steps of the analysis in a georeferenced structure. Upper-bound excess lifetime cancer risk and noncarcinogenic hazards are the risk measures, the spatial distribution of which is calculated and mapped on the involved territory, once all the pathways and receptors of the study area are identified. A sensitivity analysis completes the calculations allowing to understand how risk estimates are dependent on variability in the factors contributing to risk. The last part of the paper makes use of a case study concerning a working industrial site to put in evidence in which way the designed tool can help local authorities and policy makers in managing risks and planning remedial and reduction actions. The considered geographical area is a hypothetical territory characterized by residential, agricultural and industrial zones. The presence of two sources of contamination, a municipal waste incinerator (MWI) and a contaminated site, are evaluated by the tool application. Various typologies of receptors have been taken into account, each of them characterized by different anatomical and dietary properties. The achieved results are analyzed, compared with acceptable and background values and alternatives of minor environmental impact calculated.     

Sustainable Health Risk Management and the Role of Cross-Disciplinary Professionals in Developing Countries: Mexican Experience

The paper argues health risk management in Developing Countries cannot be sustainable unless it is conceived, planned, implemented and maintained by community-led multi-stakeholder groups using an integrated capacity building process with five components: (1) education and awareness raising; (2) strengthening information resources and decision making; (3) strengthening regulations and compliance; (4) improving basic sanitation infrastructure; and (5) stimulating the market for support products and services for health and environment sectors. Occupational and environmental health professionals with cross-disciplinary understanding are uniquely qualified to build much-needed bridges between stakeholders, risk science and policy. They should adopt a cost-effective mentality, adapting models/methods used in developed countries to developing country contexts, negotiating political obstacles and understanding cultural differences in risk sources, exposures and perceptions. Stakeholders – health professionals, community representatives, officials, NGOs/advocacy groups, industries, and providers of products/services – collaborate to detect needs, mobilize resources, design, develop, implement, consolidate and maintain interventions to priority problems. Field experience in Mexico supports the argument. This sustainability process is adaptable to other keystone development sectors like soil and water resources stewardship, biodiversity conservation, agriculture and energy.     

A decision model for environmental R&D

In this paper, a simple decision model is formulated to investigate the optimal funding level for an environmental R&D activity. The Bayesian approach is extended to research in situations where the researchers have prior beliefs different from the ultimate decision makers. Sensitivity analysis demonstrated how the optimal level of R&D varies with assumptions about: 1) the shadow price of R&D resources, which is a measure of the scarcity of funds; 2) the technical difficulty of the research area; 3) the potential payoffs involved in the decision that may be influenced by the research outcome; and 4) the prior knowledge of the key decision makers. Among other insights, analysis of the model demonstrated that the optimal research expenditure jumped from zero to a significant amount or conversely with small changes in parameters. The jump occurred when the expected cost of an uninformed decision equals the cost of research plus the expected cost of the contingent decision. In addition, the optimal research expenditure was sensitive to the technical difficulty of the research area.     

Ways of improving the management of environmental risks

From the public's discovery of environmental quality in the late 1960s to the present, there has been increasing recognition that a more systematic approach is required to manage risks and to achieve the gains at low cost. Such a systematic approach must begin with risk identification, then go on to risk assessment, consideration of management options, a decision analysis of the options, and an examination of strategies for reducing loss. One of the most difficult aspects of environmental risk management is setting goals. There is a tendency to engage in rhetoric about zero risks and a pristine environment. However, moving toward more realistic goals requires consideration of what is an acceptable risk level. This level cannot be defined without knowing the benefits that come with the risk and the costs of reducing the risk. More generally, the criteria for selecting a risk management strategy include the residual level of risk, efficiency in reducing risk, equity, administrative simplicity, and public acceptability. A number of frameworks are currently used by U.S. regulatory agencies to manage risk: no-risk, risk-risk, technology-based standards, risk-benefit, cost-effectiveness, regulatory budget, and benefit-cost analysis. In specifying that an agency must use one of these frameworks, the U.S. Congress is implicitly specifying the goals for risk reduction. It appears to be easier for the U.S. Congress to specify a framework than a goal. Some of the nonregulatory means of managing risk include the market, and legal mechanisms. These risk management institutions have been effective and are a necessary part of any risk management program.     

Methods for integrated assessment

Integrated assessment is an approach that seeks to involve all disciplines in policy-relevant assessment. The process aims to encompass environmental science, technology and policy problems. The aim is to establish an overview of the environmental issue in question that attempts to avoid the mistakes of the past associated with narrow, one-sided or unidimensional approaches. A number of methods are available for such assessments. However, they are also subject to a number of limitations, difficulties and dilemmas. Integrated methods are inherently complicated and the tradition is that only experts are involved. New more inclusionary procedures have to be devised in order to involve all stakeholders. They have to be involved in the framing of the issue and in the value judgements associated with the approach. The dilemmas cannot be solved by integrated approaches, but they can be mitigated via proper identification, analysis and evaluation of the gains and losses involved. In structuring the analysis the existence of ignorance has to be accounted for and communicated to the managers and the political decision makers. The ignorance/uncertainty aspects can be partially accommodated for via an intensification of feasible monitoring and research so as to minimise the risks of unpleasant surprises. Electronic Publication     

Integrated models for environmental management: Issues of process and design

Integration has become an important element of natural resource management over recent decades, and managers are now required to consider the social, economic, ecological, and bio-physical effects of alternative management interventions. The problem of managing across many issues is sometimes tackled by putting together a number of individual models. For this approach to work effectively, attention must be paid to both the technical details of the interactions between system components and also to the processes through which these integrated models are developed. This paper explores technical and social aspects of the development of integrated models for environmental management, and discusses two cases within which open modelling and interface prototyping processes were undertaken. The results of this exploration suggest that, for models to be used and accepted widely in integrated environmental management, developers must undertake a process that involves stakeholders and potential users, that exploits the current knowledge, and that illustrates the influence of uncertainty in the technical knowledge. This requires strict attention to the social and technical process of modelling, as well as additional skills in group facilitation and shared vision exploration, so that user expectations can be developed and met in such a way that the best information available is used by decision makers.     

Challenges for modelling and integrating environmental performances in concept design: the case of an automotive component lightweighting

The objective of this paper is to discuss the main barriers for modelling and integrating the environmental performances in the automotive concept design. Incorporating environmental assessment in the early design phase of a vehicle component is known as an important challenge that car makers need to face in order to develop more sustainable design solutions; in this regard, the Life Cycle Assessment is the most widespread methodology for the environmental assessment and comparison of alternatives. The present work illustrates the combination of such methodology with the traditional design procedure at two different levels of the component design phase, material choice and concept design. In particular, the potential benefits originated by a lightweight solution for the automotive component Throttle Body are evaluated by considering environmental and technical implications at the same level. The case study shows that a multi-disciplinary approach for design effectively allows the integration of the environmental issue in the company’s established procedures. However, interpretation of results is still a challenging aspect due to the inevitable contradicting elements which should not discourage to develop comprehensive sustainability assessment within the early design stage.     

Landscape multifunctionality: a powerful concept to identify effects of environmental change

The interdisciplinary concept of landscape multifunctionality provides a suitable platform to combine or disentangle effects of multiple environmental stressors acting on the landscape. The concept allows mapping of trade-offs, synergies, and priority conflicts between individual landscape functions, thus providing easily accessible, hands-on means to communicate findings of environmental research to decision makers and society. This rapid communication provides an overview of current developments and potential future research avenues in landscape multifunctionality.     

A quantitative risk assessment of waterborne infectious disease in the inundation area of a tropical monsoon region

Flooding and inundation are annual events that occur during the rainy season in Cambodia, and inundation has a strong relationship with human health. This study simulated the coliform bacteria distribution using a hydraulic model and estimated the impact of inundation on public health using a dose–response model. The model parameters were calibrated using field survey data from Cambodia and obtained good agreement with the coliform group count distribution. The results suggest that the impact of inundation on human health is most noticeable in residential areas. The annual average risk of infection during medium-sized flood events is 0.21. The risk due to groundwater use ranges from 0.12 to 0.17 in inundation areas and reaches as high as 0.23 outside the inundation areas. The risk attributed to groundwater use is therefore higher than that for surface water use (0.02–0.06), except in densely populated areas at the city center. There is a high risk for infection with waterborne disease in residential areas, and the annual average risk during small flood events is 0.94. An assessment of possible countermeasures to reduce the risk shows that the control of inundation may bring more risk to public health in Cambodia. Shallower inundation water (<0.3 m) leads to a higher risk of infection, but if the depth is greater than 2 m, the risk is low in residential areas. The simulated results explain the spatial distributions of infection risk,, which are vitally important for determining the highest priority places with relatively high risk and will be helpful for decision makers when considering the implementation of countermeasures.