论乌海及周边地区推广气烧石灰竖窑的可行性

本文介绍了使用焦炉煤气做气烧石灰竖窑清洁燃料国内发展概况，阐述了在乌海及周边地区利用丰富石灰石资源和焦炉剩余煤气开展清洁生产、减少环境污染、进行循环经济的必然选择，并从石灰石生产工艺选择，环境效益分析方面进行了讨论。     

云南省利用水泥回转窑处置危险废物的前景

利用独特的设备和水泥窑的工艺特点,用废物代替水泥生产中的原材料,合理处置危险废物,使环境治理和循环经济达到有效的结合,是一项废物处理和资源化的新途径,是水泥生产企业可持续发展的方向之一,具有广阔的发展前景。     

陶瓷废水处理原理及常用固液分离方法比较

本文就陶瓷废水的产生来源及废水处理原理进行了分析，对佛山市该行业废水处理常用的固液分离方式进行了处理效果及技术经济比较，指出将常用于给水处理工艺的水力循环澄清池应用在陶瓷废水处理工艺中，与其它分离方法相比，不仅占地面积小，效率高，而且易于操作和控制，可实现废水的全部回用，并建议对这种高悬浮物、高浊度水的混凝反应过程进行自动控制以提高水处理的稳定性。     

新型炉窑烟气湿式脱硫除尘技术

针对炉窑烟气净化问题 ,开发研制新型湿式脱硫除尘系列装置。实验表明 ,该技术除尘效率达 98.5 % ,脱硫效率为 80 % ,具有实用价值。     

水泥窑协同处置POPs污染土壤对环境的影响研究

 分析了水泥窑协同处置POPs污染土壤对烟气中污染物排放和熟料品质的影响,结果表明,SO2、NOx、HCl、Hg、As、Ni、Pb、粉尘、二 的排放量均低于工业大气污染物排放规定限制,与空白试验相比,水泥窑协同处置污染土壤过程中烟气中特征污染物排放量没有显著增加.水泥熟料化学成分满足相关规定,熟料产品质量达到相关标准,因此利用水泥窑协同处置POPs污染土壤是一种环境友好处理方式.     

危险废物回转窑焚烧系统的控制参数分析及调节方法研究

随着我国经济的迅速发展,危险废物产量持续增长,它们带来了严重的社会危害和环境危害。焚烧法是一种高温热处理技术,危险废物通过焚烧处理可实现无害化、减量化和资源化。回转窑焚烧系统具有处置范围广、处理量大、焚毁率高、安全可靠和可长期持续运行等特点,被国内外广泛应用。文章通过分析回转窑焚烧系统的主要控制参数,根据工程运行的实际经验,绘制了回转窑焚烧系统控制参数和焚毁率关系图,并提出了“最佳焚烧区域”的概念,对于回转窑焚烧系统的调试和运行工作,有积极的指导作用和重要的现实意义。     

利用玻纤袋除尘器处理立窑烟气

介绍了机立窑利用玻纤袋除尘器处理立窑烟气进行清洁生产工作机理、效果,以及脱硫原理及监测效果,并提出了几点使用中应注意的问题.     

Potential concerns related to using octadecyltrichlorosilane (OTS) in rendering soils and porous ceramics hydrophobic

The treatment of hydrophilic porous ceramics to render them hydrophobic and wetting to non-aqueous phase liquids (NAPLs) is frequently needed in multiphase flow experiments to control the flow or to measure the pressure of the NAPL. In addition, research dealing with soil wettability implies a need for hydrophobic or NAPL-wet soils. The traditional procedure, which has been widely used in literature, to render hydrophilic porous ceramics and soils hydrophobic is achieved by placing the hydrophilic solid in a 5% (by volume) octadecyltrichlorosilane (OTS) solution in ethanol followed by rinsing in ethanol. This research assesses the use of this procedure as it was found that this treatment procedure resulted in excess OTS on the surface of treated hydrophobic solids which can dissolve in an organic phase and in turn alter the wettability condition of adjacent hydrophilic soils. A modified procedure, which results in hydrophobic solids free of excess OTS, is presented.     

Effects of Smoke Emissions from a Charcoal Kiln on the Functioning of Forest Soil Systems: A Microcosm Study

Long-term charcoal production in small private charcoal kilns (CK) in Eastern Bieszczady Mts. (SE Poland) can cause local smoke contamination of the ambient forest environment. Responses of model soil systems, contaminated or not contaminated by CK smoke, to contrasting combinations of hydrothermic regimes were compared in laboratory microcosms (respiration of soil community, decomposition rate of soil organic matter and cotton stripes, herb seeds germination were studied). The majority of the obtained data show a markedly higher level of soil biological activity in the CK versus the control series. In some cases CK and control soil systems show different patterns of reactions to the tested combinations of microclimate regime. These phenomena should at least partly be attributed to the effects of CK pollution.     

Combustion characteristics of Malaysian municipal solid waste and predictions of air flow in a rotary kiln incinerator

Malaysia is in dire need of alternatives to landfilling for solid waste management. Recently, landfills have faced the problems of overfilling, overflowing of leachates leading to pollution of water resources, and uncontrolled dust emissions adversely affecting the local environment. With the rising cost of urbanization coupled with the high rate of waste generation, one possible method of waste treatment that is receiving particular attention by the government is incineration. Incineration of solid waste is rather new in Malaysia, with limited usage in handling small sources of waste generation such as the municipal solid waste (MSW) of resort islands; however, its potential in ameliorating the problems associated with solid waste treatment may make it an attractive alternative to landfill. This article presents the results of test runs conducted to investigate the performance of a locally designed and manufactured rotary kiln incinerator (RKI). The test runs were conducted using MSW collected from the Shah Alam municipality. The combustion efficiency was analyzed by looking at the temperature profiles and chemical species concentrations. To complement the combustion characteristics measurements, predictions of the air flow in the incinerator during the process were also investigated. The overall performance of the RKI suggests that it is suitable for treating MSW.