提高电捕焦油器安全生产运行的措施

简要叙述了电捕焦油器开工以来存在的问题,对电捕捕焦油器不能安全稳定运行的原因进行了分析,并采取改进措施。实践证明,改进工艺技术合理,方法可行,电捕焦油器运行效果达到指标要求。     

Algal toxicity induced by effluents from textile-dyeing wastewater treatment plants

This research aimed to evaluate the alga Scenedesmus obliquus toxicity induced by textiledyeing effluents(TDE).The toxicity indicator of TDE in alga at the physiological(algal growyth),biochemical(chlorophyll-a(Chl-a) synthesis and superoxide dismutase(SOD) activity) and structural(cell membrane integrity) level were investigated.Then we further study the relationship among toxicity indicators at physiological and biochemical level,and supplemented by research on algal biomacromolecules.According to the analysis of various endpoints of the alga,the general sensitivity sequence of toxicity endpoints of Scenedesmus obliquus was:SOD activity Chl-a synthesis algal growth.The stimulation rate of SOD activity increased from day 3(57.25%～83.02%) to day 6(57.25%～103.81%),and then decreased on day 15(-4.23%～-32.96%),which indicated that the antioxidant balance system of the algal cells was destroyed.The rate of Chl-a synthesis inhibition increased gradually,reaching19.70%～79.39% on day 15,while the rate of growth inhibition increased from day 3(-12.90%～10.16%) to day 15(-21.27%～72.46%).Moreover,the algal growth inhibition rate was positively correlated with the inhibition rate of SOD activity or Chl-a synthesis,with the correlation coefficients were 0.6713 and 0.5217,respectively.Algal cells would be stimulating to produce excessive reactive oxygen species,which would cause peroxidation in the cells,thereby destroying chloroplasts,inhibiting chlorophyll synthesis and reducing photosynthesis.With increasing exposure time,irreversible damage to algae can lead to death.This study is expected to enhance our understanding of the ecological risks through algal tests caused by TDE.     

氧基氯化铁非均相活化过一硫酸盐降解金橙Ⅱ

采用部分热分解法制备了氧基氯化铁（FeOCl）,用于活化过一硫酸盐（PMS）降解难降解偶氮染料金橙Ⅱ（AO7）.利用X射线光电子能谱分析（XPS）、扫描电镜（SEM）和X射线衍射光谱（XRD）对其进行了表征;通过实验评估FeOCl/PMS体系对AO7的降解效果并分析了影响AO7去除率的各种因素.结果表明：FeOCl活化PMS降解AO7效果良好,矿化率达44%.在中性条件下,当FeOCl投加量50mg/L、PMS浓度1.0mmol/L、AO7浓度0.05mmol/L时,AO7可在30min内完全降解.随PMS投加量、FeOCl投加量、Cl^-浓度和反应初始pH值的增大,AO7的脱色效果提高.FeOCl还具有良好的重复利用性.此外,通过自由基淬灭实验、EPR测试和XPS分析了反应的主要活性物种和反应机理：由PMS活化产生的SO₄^-·和·OH对污染物进行降解,其中主要活性物种为SO₄^-·.     

Development of monitoring technology for airborne particulate matter

Particulate matter suspended in the air has adverse effects onhuman health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulatematter are often filter-based, which indicates some disadvantagesbecause such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basicprinciple is to electrically charge particles passing through thePM inlet using a corona charger and measure the currents createdby charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cupimpactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and thecharger's efficiency was determined experimentally in terms ofPn, which represents the penetration through the charger,P, times the average charge number acquired by a particle,n, for different particle sizes. The correlation was constructed between the PM10 (or the PM2.5) mass concentrationsand the electrical currents due to particles, which were chargedby the diffusion charger.     

泰州市环境空气中挥发性有机物分布特征

于2018年4—9月对泰州市环境空气中挥发性有机物(VOCs)组分开展现场观测,结合观测数据分析该市大气中VOCs的时空分布特征。结果表明:观测期间泰州市环境空气中VOCs平均摩尔比为45.1 nmol/mol,其中含氧挥发性有机物占比为57.8%;受周边排放源和地理位置影响,下风向点位的VOCs测定值高于其他点位;VOCs月均最高值出现在6月,与臭氧月均最高值出现时间一致,7—9月气团出现老化,导致臭氧生成能力减弱;观测期间VOCs中甲苯/苯(T/B)比值范围为0.201 9～5.130 3,且大部分T/B比值2,说明溶剂、油气和液化石油气挥发等排放源对泰州市环境空气中VOCs的影响较为显著。     

Morphology and electrical conductivity of PACS

ＩｎｔｒｏｄｕｃｔｉｏｎＰｏｌｙａｌｕｍｉｎｉｕｍｃｈｌｏｒｉｄｅ(ＰＡＣ) ,ａｋｉｎｄｏｆｉｎｏｒｇａｎｉｃｐｏｌｙｍｅｒｆｌｏｃｃｕｌａｎｔ,ｉｓｗｉｄｅｌｙｕｓｅｄｉｎｗａｔｅｒａｎｄｗａｓｔｅｗａｔｅｒｔｒｅａｔｍｅｎｔ.ＩｎｏｒｄｅｒｔｏｉｎｃｒｅａｓｅｔｈｅｃｏａｇｕｌａｔｉｏｎｅｆｆｅｃｔｏｆＰＡＣａｎｄｉｍｐｒｏｖｅｔｈｅｑｕａｌｉｔｙｏｆＰＡＣｐｒｏｄｕｃｔ,ｉｔｉｓｎｅｃｅｓｓａｒｙｔｏｒａｉｓｅｔｈｅｄｅｇｒｅｅｏｆｐｏｌｙｍｅｒｉｚａｔｉｏｎｏｆＰＡＣ .Ｇｅｎｅｒａｌｌｙ ,ｔ…     

Cobalt in alluvial Egyptian soils as affected by industrial activities

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｎａｔｕｒｅＣｏｏｃｃｕｒｓｉｎｔｗｏｏｘｉｄａｔｉｏｎｓｔａｔｅｓ ,Ｃｏ2 + ａｎｄＣｏ3+ ,ａｎｄｆｏｒｍａｔｉｏｎｏｆｔｈｅｃｏｍｐｌｅｘａｎｉｏｎＣｏ(ＯＨ) - 3 ｉｓａｌｓｏｐｏｓｓｉｂｌｅ .ＤｕｒｉｎｇｗｅａｔｈｅｒｉｎｇＣｏｉｓｒｅｌａｔｉｖｅｌｙｍｏｂｉｌｅｉｎｏｘｉｄｉｚｉｎｇａｃｉｄｅｎｖｉｒｏｎｍｅｎｔ,ｂｕｔｄｕｅｔｏａｈｉｇｈｓｏｒｐｔｉｏｎｂｙＦｅａｎｄＭｎｏｘｉｄｅｓ,ａｓｗｅｌｌａｓｂｙｃｌａｙｍｉｎｅｒａｌｓ,ｔｈｉｓｍｅｔａｌｄｏｅｓｎｏｔｍ…     

石英表面配合物与溶解动力学模型

阐述了石英表面配合物和溶解动力学机理之间的关系，指出了石英的反应性主要受负电性表面物种的控制，从而导致电解质、离子强度、pH等因素对石英溶解的催化效应．溶解达率的提高与反应活化能的降低成活化熵的增大有关。最后，介绍了在过渡态理论和表面反应模型基础上建立的石英溶解速率方程。     

电热管焊接接头挤压裂纹的分析

针对电热管焊接接头挤压产生的裂纹 ,通过采用金相显微镜观察其金相组织并用直读光谱对原材料成分进行化学成分分析 ,排除了成分、焊接工艺规范等的影响。经过对挤压过程分析 ,发现应力集中点是产生裂纹的主要原因 ,并提出了改进的方法     

略论与电除尘器设计有关的几个问题

作者根据多年从事电除尘器工作的经验，提出了在设计、制造和调试中应充分考虑的诸如原始条件、设备参数选择、结构设计等影响电除尘器性能的各种因素，并从理论上进行分析和论证，以期通过讨论寻求最佳的设计方案和实践效果。