Climate readiness of recovery plans for threatened Australian species

The rapidly changing climate is posing growing threats for all species, but particularly for those already considered threatened. We reviewed 100 recovery plans for Australian terrestrial threatened species (50 fauna and 50 flora plans) written from 1997 to 2017. We recorded the number of plans that acknowledged climate change as a threat and of these how many proposed specific actions to ameliorate the threat. We classified these actions along a continuum from passive or incremental to active or interventionist. Overall, just under 60% of the sampled recovery plans listed climate change as a current or potential threat to the threatened taxa, and the likelihood of this acknowledgment increased over time. A far smaller proportion of the plans, however, identified specific actions associated with ameliorating climate risk (22%) and even fewer (9%) recommended any interventionist action in response to a climate-change-associated threat. Our results point to a disconnect between the knowledge generated on climate-change-related risk and potential adaptation strategies and the extent to which this knowledge has been incorporated into an important instrument of conservation action.     

A stochastic approach for risk analysis in vapor cloud explosion

A stochastic approach for evaluating the risk of vapor cloud explosions is proposed in this work. The proposed methodology aims to incorporate the effect of uncertainty into the risk analysis to produce a better overall view for the risk. Some stochastic variables are used to estimate the probability of vapor cloud explosions: frequency of the release, the probability of not having an immediate ignition, the probability of delayed ignition and the probability of a vapor cloud explosion given a delayed ignition, as well as different possible meteorological conditions. These stochastic variables are represented with probability distribution curves. Different curves for the frequencies of releases from process equipment types (steel process pipes, flanges, manual valves, actuated valves, etc.), different equipment diameters and different leak sizes are also used in this analysis. Monte Carlo simulation is performed to obtain the risk as a probability distribution using the Analytic Solver Platform. Then the risk distribution curve obtained by Monte Carlo simulation is used to estimate the probability of satisfying the risk tolerance criterion.     

The place of nature in conservation conflicts

Conservation conflicts are gaining importance in contemporary conservation scholarship such that conservation may have entered a conflict hype. We attempted to uncover and deconstruct the normative assumptions behind such studies by raising several questions: what are conservation conflicts, what justifies the attention they receive, do conservation-conflict studies limit wildlife conservation, is scientific knowledge stacked against wildlife in conservation conflicts, do conservation-conflict studies adopt a specific view of democracy, can laws be used to force conservation outcomes, why is flexibility needed in managing conservation conflicts, can conservation conflicts be managed by promoting tolerance, and who needs to compromise in conservation conflicts? We suggest that many of the intellectual premises in the field may defang conservation and prevent it from truly addressing the current conservation crisis as it accelerates. By framing conservation conflicts as conflicts between people about wildlife or nature, the field insidiously transfers guilt, whereby human activities are no longer blamed for causing species decline and extinctions but conservation is instead blamed for causing social conflicts. When the focus is on mitigating social conflicts without limiting in any powerful way human activities damaging to nature, conservation-conflict studies risk keeping conservation within the limits of human activities, instead of keeping human activities within the limits of nature. For conservation to successfully stop the biodiversity crisis, we suggest the alternative goal of recognizing nature's right to existence to maintenance of ecological functions and evolutionary processes. Nature being a rights bearer or legal person would imply its needs must be explicitly taken into account in conflict adjudication. If, even in conservation, nature's interests come second to human interests, it may be no surprise that conservation cannot succeed.     

Performance assessment system of health,safety and environment based on experts' weights and fuzzy comprehensive evaluation

Performance evaluation of Health, Safety and Environment (HSE) is the measurement of a company's achievement in HSE management. In order to receive a comprehensive and objective evaluation result, it is necessary to consider all evaluation factors and experts at different levels when HSE performance assessment is conducted. To improve conventional HSE performance evaluation, where weighted average method was used, a Fuzzy Comprehensive Evaluation (FCE) method is used in this study by taking experts' weights into account. Further, an HSE operating performance assessment system is designed to simplify manual and complex assessment process and generate charts and analysis reports automatically. Finally, a case of petrochemical enterprise is used to illustrate the effectiveness of the method and system.     

Development and evaluation of RAMP I – a practitioner’s tool for screening of musculoskeletal disorder risk factors in manual handling

RAMP I is a screening tool developed to support practitioners in screening for work-related musculoskeletal disorder risk factors related to manual handling. RAMP I, which is part of the RAMP tool, is based on research-based studies combined with expert group judgments. More than 80 practitioners participated in the development of RAMP I. The tool consists of dichotomous assessment items grouped into seven categories. Acceptable reliability was found for a majority of the assessment items for 15 practitioners who were given 1?h of training. The usability evaluation points to RAMP I being usable for screening for musculoskeletal disorder risk factors, i.e., usable for assessing risks, being usable as a decision base, having clear results and that the time needed for an assessment is acceptable. It is concluded that RAMP I is a usable tool for practitioners.     

Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

A hybrid model for human factor analysis in process accidents: FBN-HFACS

Human factors are the largest contributing factors to unsafe operation of the chemical process systems. Conventional methods of human factor assessment are often static, unable to deal with data and model uncertainty, and to consider independencies among failure modes. To overcome the above limitations, this paper presents a hybrid dynamic human factor model considering Human Factor Analysis and Classification System (HFACS), intuitionistic fuzzy set theory, and Bayesian network. The model is tested on accident scenarios which have occurred in a hot tapping operation of a natural gas pipeline. The results demonstrate that poor occupational safety training, failure to implement risk management principles, and ignoring reporting unsafe conditions were the factors that contributed most failures causing accident. The potential risk-based safety measures for preventing similar accidents are discussed. The application of the model confirms its robustness in estimating impact rate (degree) of human factor induced failures, consideration of the conditional dependency, and a dynamic and flexible modelling structure.     

Toward harmonizing prospective effectiveness assessment for road safety: Comparing tools in standard test case simulations

Abstract

Objective: With the overall goal to harmonize prospective effectiveness assessment of active safety systems, the specific objective of this study is to identify and evaluate sources of variation in virtual precrash simulations and to suggest topics for harmonization resulting in increased comparability and thus trustworthiness of virtual simulation-based prospective effectiveness assessment.

Methods: A round-robin assessment of the effectiveness of advanced driver assistance systems was performed using an array of state-of-the-art virtual simulation tools on a set of standard test cases. The results were analyzed to examine reasons for deviations in order to identify and assess aspects that need to be harmonized and standardized. Deviations between results calculated by independent engineering teams using their own tools should be minimized if the research question is precisely formulated regarding input data, models, and postprocessing steps.

Results: Two groups of sources of variations were identified; one group (mostly related to the implementation of the system under test) can be eliminated by using a more accurately formulated research question, whereas the other group highlights further harmonization needs because it addresses specific differences in simulation tool setups. Time-to-collision calculations, vehicle dynamics, especially braking behavior, and hit-point position specification were found to be the main sources of variation.

Conclusions: The study identified variations that can arise from the use of different simulation setups in assessment of the effectiveness of active safety systems. The research presented is a first of its kind and provides significant input to the overall goal of harmonization by identifying specific items for standardization. Future activities aim at further specification of methods for prospective assessments of the effectiveness of active safety, which will enhance comparability and trustworthiness in this kind of studies and thus contribute to increased traffic safety.     

A proactive process risk assessment approach based on job hazard analysis and resilient engineering

Complex systems often experience a long period of incubation before accidents occur. Therefore, a proactive risk assessment is essential for process safety. The conventional job hazard analysis (JHA) method has been an effective tool to conduct a process risk assessment in the high-risk industrial field. However, the conventional JHA is inadequate for the proactive risk assessment since it is usually conducted during and before one specific operation process. Operations such as startup and maintenance are performed repeatedly on the lifecycle of a plant. Therefore, the risk reduction measures for the industrial process should include not only preventive actions obtained from the conventional JHA but also recovery ones. Resilience engineering (RE) has proven to be helpful for the recovery analysis of a complex system. The objective of this paper is to propose a proactive and comprehensive process risk assessment approach based on JHA and RE. The mechanism of applying RE to address operation process risk is illustrated. The integrated approach can provide guidelines to establish proactive risk reduction measures as well as maintain a low-risk level. Finally, a gas transmission startup process risk assessment case is presented to demonstrate its applicability.     

Quantifying the impact of vegetation-based metrics on species persistence when choosing offsets for habitat destruction

Developers are often required by law to offset environmental impacts through targeted conservation actions. Most offset policies specify metrics for calculating offset requirements, usually by assessing vegetation condition. Despite widespread use, there is little evidence to support the effectiveness of vegetation-based metrics for ensuring biodiversity persistence. We compared long-term impacts of biodiversity offsetting based on area only; vegetation condition only; area × habitat suitability; and condition × habitat suitability in development and restoration simulations for the Hunter Region of New South Wales, Australia. We simulated development and subsequent offsetting through restoration within a virtual landscape, linking simulations to population viability models for 3 species. Habitat gains did not ensure species persistence. No net loss was achieved when performance of offsetting was assessed in terms of amount of habitat restored, but not when outcomes were assessed in terms of persistence. Maintenance of persistence occurred more often when impacts were avoided, giving further support to better enforce the avoidance stage of the mitigation hierarchy. When development affected areas of high habitat quality for species, persistence could not be guaranteed. Therefore, species must be more explicitly accounted for in offsets, rather than just vegetation or habitat alone. Declines due to a failure to account directly for species population dynamics and connectivity overshadowed the benefits delivered by producing large areas of high-quality habitat. Our modeling framework showed that the benefits delivered by offsets are species specific and that simple vegetation-based metrics can give misguided impressions on how well biodiversity offsets achieve no net loss.