基于铁锰泥的除砷吸附剂性能比较及吸附机理

为解决反冲洗铁锰泥粉末吸附剂（BSPA）使用后难以泥水分离问题,将除铁锰水厂生物滤池产生的反冲洗泥制成颗粒吸附剂（GA）和磁性粉末吸附剂（MPA）,并对BSPA、GA和MPA的除砷性能进行了比较,通过SEM、TED、XRD、BET、FTIR等技术对3种材料进行了表征,寻找3种吸附剂之间除砷性能差异的根源.结果表明,BSPA、GA和MPA对As （V）的最大吸附容量分别为40.980,5.048,8.694mg/g,改性后的吸附材料GA和MPA对砷的吸附能力下降.BSPA是一种以纤铁矿为主的无定形结构混合物,并混有针铁矿和结晶度差的水铁矿,GA的XRD图谱中出现石英晶体和少量赤铁矿晶体的衍射峰,而MPA的主要成分为结晶程度较高的磁赤铁矿.3种材料中均存在有利于吸附的含羟基官能团.BSPA、MPA和GA的比表面积分别为253.150,238.660,43.803m²/g.物相改变且结晶程度增加、表面羟基减少和比表面积降低是导致GA和MPA的砷吸附容量比BSPA低的主要因素.     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

耐热粉末铝合金筒体热旋成形试验

介绍了喷射沉积耐热铝合金管坯经挤压变形 ,变薄旋压筒体的研制过程 ;重点论述了热旋成形筒体的工艺路线。试验探讨了耐热铝合金的旋压温度为 35 0～ 45 0℃ ,道次变薄率约为2 0 % ,累计变薄率约 5 0 % ,需中间退火 ,退火温度宜取 35 0℃。热旋结果认为 ,喷射沉积耐热粉末铝合金铸坯直接热旋成形困难 ,需经挤压比大于 4的变形致密 ,有助于热旋成形。耐热粉末铝合金挤压坯加热变薄旋压 ,应采用小压下量多道次的变形过程 ,逐渐细化晶粒组织 ,才能旋出综合性能良好的筒形件。     

国产十种合成洗衣粉诱发华西大蟾蜍(Bufo bufo andrewsi)蝌蚪红细胞微核的研究

研究了国产10种洗衣粉对华西大蟾蜍(Bufo bufo andrewsi)蝌蚪红细胞微核的诱变,结果表明“活力28超浓缩无泡加香”洗衣粉,“TM”及“SD”洗衣粉(1.2,6.0及12.0ppm)诱发蝌蚪微核率增高。在我们实验条件下,另外7种合成洗衣粉中的5种在12.0ppm浓度组也引起微核率升高。     

加压曝气生物反应器及其工艺设计

介绍了加压曝气生物反应器及其处理系统的工艺设计 ,包括反应器原理、工艺流程、运行参数 ,工艺设计特点等     

Wood materials used as a means to reduce greenhouse gases (GHGs): An examination of wooden utility poles

There has been growing concern over the build-up of greenhouse gase(GHGs) in the atmosphere, particularly carbon dioxide (CO₂), as acause of global warming. The IPCC Third Assessment Report (2001) suggests two ways in which the choice of materials could berelevant. First, some materials, particularly wood, have the advantage thatthey continue to hold carbon (C)in their cells even after being convertedto products. The implications of this feature are well researched. Second,an area that is not well researched relates to the different energyrequirements for producing similar products made with different materials. Using the findings of recent research, this paper compares the energyrequirements and C emissions of manufacturing a product using wood withthat of other materials. The case study of utility poles demonstrates thepositive C and global warming consequences of the lower energyrequirements of wood in the U.S., compared to other materials such assteel or concrete. It demonstrates that GHG emissions associated withutility poles are a small but significant percent of total US annual emissions. Wood utility poles are associated with GHG emission reductions of 163Terragrams (Tg) of CO₂ when compared with steel poles. This isabout 2.8 percent of US annual GHG emissions, which are estimated atabout 5.28 Petragrams (Pg) of CO₂ annually. Thus, the use ofwooden utility poles rather than steel results in a small but significantreduction in total US emissions.     

利用粉煤灰制备高纯超细氧化铝粉体的研究

利用粉煤灰为原料制备高纯超细氧化铝粉体。给出了采用硅酸二钙晶相转变自粉化、高效分散剂———碳化法从粉煤灰中制备氧化铝方法的工艺路线 ,确定了从粉煤灰制备高纯超细氧化铝粉体的最佳工艺条件 ,为粉煤灰的高价值利用开辟了一条新途径     

脉动跟踪除尘技术的应用研究

针对粉粒状物料在散装发送过程中 ,容易引起粉尘飞扬的问题 ,利用现代脉动跟踪技术和表面过滤技术 ,设计研制的除尘系统 ,始终将吸尘罩与料堆扬尘点的动态相对位置控制在合理的范围内 ,实现了粉粒状物流连续自动的、环保高效作用     

光催化降解有机磷农药废水的可行性

在ＴｉＯ２粉末的存在下，研究光催化降解有机磷农药废水的可行性。结果表明，ＣＯＤｃｒ６５０ｍｇ／Ｌ，有机磷１９．８ｍｇ／Ｌ的有机磷农药废水在３７５Ｗ中压汞灯照射４ｈ，ＣＯＤ去除率为９０％，有机磷将完全转化为无机磷。同时还研究了光催化剂ＴｉＯ２的用量，反应液初始ｐＨ值，空气流量，外加Ｆｅ３＋浓度等多种因素对光降解的影响；并利用太阳聚光做了室外实验     

锅炉煤粉风管堵塞的预防和疏通

针对煤粉锅炉一次风管堵塞的现象，指出了易堵塞的部位。分析了造成堵塞的原因，提出了疏通处理方法和应注意的问题。