Efficacy of recent state implementation plans for 8-hour ozone

The development of state implementation plans (SIPs) for attainment of criteria pollutant standards is an integral component of air quality management in the United States. However, the content and efficacy of SIPs have rarely been examined systematically. Here, 20 SIPs developed in response to the 1997 8-hr ozone standard are reviewed as case studies of attainment efforts at the state level. Comparison of observed and model predicted ozone concentrations shows the US Environmental Protection Agency (EPA) recommended modeled attainment test to be a somewhat conservative predictor of attainment. Among 12 SIPs for regions that sought attainment by 2009, the test correctly predicted attainment and nonattainment in four and five regions, respectively; in the other three regions, attainment was observed despite predictions of nonattainment. However weight-of-evidence determinations and deviations from the recommended modeled attainment test methodology led five of these SIPs to predict attainment that was not in fact observed by 2009; three of those regions achieved attainment in 2010. Ozone and NO2 concentrations declined across much of the United States during the period covered by the SIPs, with rates of improvement strongly correlated with the initial pollution levels and hence greatest in nonattainment regions. However at monitors with mid-range levels of ozone initially, rates of reduction were largely independent of the initial attainment status of the region. This is consistent with thefact that apart from California, the majority of ozone precursor reductions documented by SIPs resulted from federal measures rather than from state or local controls specific to the nonattainment regions.     

Validation of Three New Methods for Determination of Metal Emissions Using a Modified Environmental Protection Agency Method 301

Abstract

Three new methods applicable to the determination of hazardous metal concentrations in stationary source emissions were developed and evaluated for use in U.S. Environmental Protection Agency (EPA) compliance applications. Two of the three independent methods, a continuous emissions monitor-based method (Xact) and an X-ray-based filter method (XFM), are used to measure metal emissions. The third method involves a quantitative aerosol generator (QAG), which produces a reference aerosol used to evaluate the measurement methods. A modification of EPA Method 301 was used to validate the three methods for As, Cd, Cr, Pb, and Hg, representing three hazardous waste combustor Maximum Achievable Control Technology (MACT) metal categories (low volatile, semivolatile, and volatile). The modified procedure tested the methods using more stringent criteria than EPA Method 301; these criteria included accuracy, precision, and linearity. The aerosol generation method was evaluated in the laboratory by comparing actual with theoretical aerosol concentrations. The measurement methods were evaluated at a hazardous waste combustor (HWC) by comparing measured with reference aerosol concentrations. The QAG, Xact, and XFM met the modified Method 301 validation criteria. All three of the methods demonstrated precisions and accuracies on the order of 5%. In addition, correlation coefficients for each method were on the order of 0.99, confirming the methods’ linear response and high precision over a wide range of concentrations. The measurement methods should be applicable to emissions from a wide range of sources, and the reference aerosol generator should be applicable to additional analytes. EPA recently approved an alternative monitoring petition for an HWC at Eli Lilly’s Tippecanoe site in Lafayette, IN, in which the Xact is used for demonstrating compliance with the HWC MACT metal emissions (low volatile, semivolatile, and volatile). The QAG reference aerosol generator was approved as a method for providing a quantitative reference aerosol, which is required for certification and continuing quality assurance of the Xact.     

Shifts and stasis in marine HAB monitoring in New Zealand

This review article outlines harmful algal bloom (HAB) monitoring practices in New Zealand and highlights the shift from light microscope (LM)-based identification and quantification of the early 1990s to the use of molecular tools to support the HAB monitoring programmes two decades later. Published research and available client information from the monitoring programmes have been reviewed; HAB events and programme changes are highlighted. The current HAB monitoring practices allow for rapid determination of potential biotoxin issues for the shellfish industry and of potential ichthyotoxic events for finfish farmers. The use of molecular tools, including quantitative PCR, has improved risk assessments for those HAB species that are difficult to differentiate to species level using LM. This has enabled rapid feedback to aquaculture managers during HAB events. Tests for biotoxins in flesh remain the regulatory tools for commercially harvested shellfish, but this is supported by the weekly phytoplankton monitoring data. Recreational (non-commercial) shellfish harvesting and commercial finfish aquaculture rely solely on phytoplankton monitoring to assess the biotoxin risk. HAB monitoring in New Zealand continues to maintain internationally recognised standards, and the government-funded research programmes feed the latest knowledge and technical methods into the programmes. The early dependence on light microscopy continues but is now supported by molecular tools, with a view to employing multi-species detection systems in the future. The traditional mouse bioassay test has been fully replaced by chemical tests.     

Kinetic study of γ-hexabromocyclododecane orally given to laying hens (Gallus domesticus)

Introduction  

High concentrations of hexabromocyclododecane (HBCD) sometimes recorded in free-range hens' eggs are thought to be due to soil ingestion. Of the three stereoisomers of HBCD (α-, β-, and γ-HBCD), γ-HBCD is the main component in the commercial mixture, as well as in environmental matrices, whereas the isomer profile is α-dominated in biota. In fish and in mammals, this shift is thought to be due to a rapid elimination of γ-HBCD and to its bioisomerization to the more persistent α-HBCD. The aim of the current controlled study was to better understand the fate of ingested HBCD in laying hens. The isomer profile in soil being γ-dominated, excretion kinetics of γ-HBCD into egg yolk, and accumulation in liver and in abdominal fat were investigated.     

The use of critical loads maps to assess the effects of sulphur pollution control policies on nature conservation sites in England

Maps showing the critical loads for soil acidification and their exceedence produced by the UK Department of the Environment were examined for the potential impacts on nature conservation in England. Consideration was given to modelled depositions in 2005, after full implementation of the EC Large Combustion Plant Directive (i.e. a 60% reduction in UK sulphur emissions from 1980 levels). A second scenario was also examined, in which the remaining deposition was further reduced by 50% (i.e. an 80% reduction from 1980 levels). No examination was made of the impacts of present day deposition. Critical load exceedence maps for soil acidification were studied at the 1 km square scale for all of England. All SSSIs in England within squares where the critical load will remain exceeded were identified; geological SSSIs were excluded. In these squares 736 biological SSSIs were found to occur. The special interest for 136 of these was not considered to be susceptible to soil acidification damage. The remaining 600 sites are, therefore, considered to be at risk from continued acidification. The 600 sites represent 16.3% of the total number of SSSIs in England. The actual ‘exceeded’ area on these sites was found to represent 26.2% of the total SSSI area of Britain. If emissions are further reduced by 50% the proportions drop to 6.8% and 15.6% respectively. The sites are located throughout England, especially in upland areas of the north and west. However, a large number of sites also occur on exceeded areas on the dry acidic soils of southern and eastern parts of the country. These sites exhibit a wide range of habitat types. Most common are woodlands, peatlands and heathlands. A significant proportion of the nature conservation resource of England will remain at risk from acidification even after full implementation of existing UK government policy commitments. Even a major reduction beyond that commitment is not sufficient to prevent exceedence of critical loads on 250 of these SSSIs. Protection of Britain's natural environment would, therefore, require a very significant reduction in acid emissions beyond that which is currently agreed.     

An elegant application of appropriate technology: the Sheep Creek Hatchery

Alaska's program for rebuilding salmon stock is calledfishery enhancement. Hatchery technology can produce dramatic increases in numbers of fish homing to selected streams. The Sheep Creek Hatchery is unusually efficient— it increases a fish run by a factor of 3000 and produces salmon at 9–11c/kg by minimizing mechanical energy inputs and human labor. The design harnesses the force of gravity and capitalizes on instinctual behavior of the fish. Since migratory fish collect protein from ocean pasturage, the technology increases the share of this resource collected and concentrated for harvest in a specific country or region. While small seaside hatcheries can solve biological problems of depleted fish stocks, economic and political considerations may preclude efficient utilization of the protein produced. Further, the potential for one state or country to concentrate fish near its shores poses new dilemmas for international regulation of harvests.     

ASSESSMENT OF POSSIBLE IMPACTS OF CLIMATE CHANGE IN AN URBAN CATCHMENT1

ABSTRACT: Stationarity of rainfall statistical parameters is a fundamental assumption in hydraulic infrastructure design that may not be valid in an era of changing climate. This study develops a framework for examining the potential impacts of future increases in short duration rainfall intensity on urban infrastructure and natural ecosystems of small watersheds and demonstrates this approach for the Mission/Wagg Creek watershed in British Columbia, Canada. Nonstationarities in rainfall records are first analyzed with linear regression analysis, and the detected trends are extrapolated to build potential future rainfall scenarios. The Storm Water Management Model (SWMM) is used to analyze the effects of increased rainfall intensity on design peak flows and to assess future drainage infrastructure capacity according to the derived scenarios. While the framework provided herein may be modified for cases in which more complex distributions for rainfall intensity are needed and more sophisticated stormwater management models are available, linear regressions and SWMM are commonly used in practice and are applicable for the Mission/Wagg Creek watershed. Potential future impacts on stream health are assessed using methods based on equivalent total impervious area. In terms of impacts on the drainage infrastructure, the results of this study indicate that increases in short duration rainfall intensity may be expected in the future but that they would not create severe impacts in the Mission/Wagg Creek system. The equivalent levels of imperviousness, however, suggest that the impacts on stream health could be far more damaging.     

Resource scarcity,energy use and environmental impact: A case study of the New Bedford,Massachusetts, USA,fisheries

The commercial fishing fleet in New Bedford, Massachusetts, USA, harvests seafood on George’s Bank, home of one of the nation’s most productive fisheries. We calculated the energy return on investment (EROI) and carbon intensity of protein harvest in the New Bedford fisheries from 1968 to 1988. EROI is the ratio of the energy content of the edible fish protein harvested to the quantity of fossil fuel energy used directly in the harvesting process. Carbon intensity is the quantity of carbon dioxide (CO₂) released (from the burning of fossil fuels) per calorie of edible fish protein harvested. The results show that the EROI of protein harvest declined from 0.18 to 0.028 from 1968 to 1988, indicating that the energy used to harvest seafood increased from about 6 to 36 kcal of fuel for each kilocalorie of protein harvested. The quantity of CO₂ released per calorie of edible fish protein is a linear function of energy use and therefore increased in a similar manner. During this period there was a large increase in fishing effort (caused by the increase in the real price of seafood products, favorable tax treatment for new vessel construction, and low interest loans from the government), and a decline in several important species of fish. The results suggest that fishing pressure could be managed effectively by the regulation of fuel use by the fleet. Despite the increase in the price of many seafood products, fishermen absorbed many of the costs of increasing scarcity in the form of longer working hours and fewer men per vessel.