Changes in photochemical and antioxidant enzyme activities in maize (Zea mays L.) leaves exposed to excess copper

Changes in photosynthetic and antioxidant activities in maize (Zea mays L.) leaves of cultivars 3223 and 31G98 exposed to excess copper (Cu) were investigated. Cu treatment reduced the shoot and root length of both cultivars. No significant difference of Cu accumulation in the roots of both cultivars was observed while the cultivar 3223 accumulated significantly higher Cu in leaves than 31G98. The observed decreases in effective quantum efficiency of PSII, ETR and qP indicate an over excitation of photochemical system in 3223 compared to 31G98. The leaf chlorophyll and carotenoid contents of both cultivars decreased with increasing Cu concentration. A far higher production of anthocyanins in 31G98 has been observed than that of 3223. At 1.5 mM Cu concentration, all antioxidant enzyme activities increased in leaves of the cultivar 31G98 while there were no significant changes in SOD and GR activities in 3223 compared to the control except increased APX and POD activities. The lower Cu accumulation in leaves and higher antioxidant enzyme activities in 31G98 suggested an enhanced tolerance capacity of this cultivar to protect the plant from oxidative damage.     

Odor-annoyance estimates from roadtraffic combustion exhausts: Calibration with master scaling using pyridine as a reference

The present field study addressed the need for a procedure that provides a defined unit of measurement of perceived annoyance from environmental odors, calibrating the estimates for individual scaling behavior and context effects. In including 25 subjects, the purpose was to demonstrate the applicability of the master-scale procedure with magnitude estimation to perform such a calibration of odor-annoyance estimates for target stimuli such as road-traffic combustion exhausts (13 000 vehicles/d; averaging 47 μg/m³ over the day/night with peaks exceeding 100 μg/m³ of nitrogen dioxide; NO₂). For comparison, calibrated estimates were also obtained for a backyard expected to be considerably less polluted (comparable with 18 μg/m³ of NO₂) and for blank stimuli presented indoors. The data transformation for the calibration procedure with which annoyance is expressed in either master-scale units or pyridine equivalents requires estimates of a reference stimulus for which seven concentrations of pyridine were used. The results provide an illustration of master scaling of odor annoyance, and imply that use of a modulus (standard stimulus with a predefined annoyance magnitude), in contrast to master scaling, is not sufficient for calibration for individual scaling behavior and context effects.     

Contribution of vehicle emissions from an attached garage to residential indoor air pollution levels

The infiltration of vehicle emissions into a house from the attached garage was studied for 16 homes of differing designs using the same extensively characterized vehicle at each home. Before the in-home measurement program, the cold-start and hot-start tailpipe emissions and hot-soak evaporative emissions from a 1993 Buick Regal were measured using standard vehicle emissions measurement methods. The emissions were chemically characterized for methane, nonmethane hydrocarbons (NMHC), and carbonyl compounds. The in-home measurements occurred over two winter seasons (1997-1998 and 1998-1999) in Ottawa, Ontario, Canada. Samples of indoor air and garage atmosphere were characterized for carbon monoxide, carbon dioxide, methane, NMHC, and carbonyl compounds. During the second year, real-time measurements of carbon, carbon dioxide, and total hydrocarbons were made to determine when and for how long the emissions plume infiltrates the house. Chemical mass balance modeling results using 31 NMHC species suggest that between 9 and 71% of the concentrations measured in the house during the hot-soak test and between 13 and 85% of the concentrations measured in the house during the cold-start test could be attributed to vehicle emissions infiltrating from the garage. In contrast, increases in carbonyl compound concentrations caused by the vehicle were difficult to detect above the already significant levels found in the houses.     

The removal of reactive black 5 from aqueous solutions by cotton seed shell

This study investigated the removal of Reactive Black 5 (RB5) textile dye from aqueous solutions using cotton (Gossypium hirsutum) seed shell (CSS) as low cost adsorbents. The data were described according to the Freundlich and Langmuir isotherm models. Of these, the Langmuir model provided the best fit for the experimental data. The highest measured adsorption density was 12.19 mg/g at pH 2. An equilibrium adsorption rate of RB5 by CSS (q(e) = 11.879 mg/g) was observed at 30 minutes. In order to evaluate the adsorption kinetic mechanisms, pseudo first and second order rate kinetic models and an intraparticle diffusion model were applied, with the pseudo second order model providing an excellent fit for the data.     

A novel ligand for cloud point extraction to determine gold content in ore samples

Gold is a valuable metal occurring usually at very low concentrations in complex natural samples. Gold analysis thus needs preconcentration methods. Classical liquid–liquid extraction involves hazardous organic solvents. Alternatively, cloud point extraction involves non-toxic and nonvolatile surfactants. Here, we analyzed ore samples. The complex of Au(III) with sulphapyridylazo resorcin was extracted by the cloud point method. Concentrations were measured by flame atomic absorption spectrometry. We tested the effects of pH, reagent concentration, Triton X-100 surfactant concentration, equilibration temperature and time. Results show that the best detection limit of the method was 0.48 µg L^?1 for Au with a preconcentration factor of 31 times. Calibration is linear in range of 6.4–2,000 µg L^?1, and relative standard deviations are lower than 5 %. Quantum chemical computations reveal the plausible structure of the gold–ligand complex. This report represents the first determination of gold using sulphapyridylazo resorcin as a ligand.     

Efficiency of Modified Composite Biosorbent for Bioremoval of Phosphate Ions in Aqueous Area: Process Modeling Studies

This paper was focused on the biosorption of phosphate ions from aqueous solution onto the cetyltrimethylammonium bromide (CTAB) modified multi-component biosorbent composed of pine, oak, hornbeam and fir sawdust biomasses. A series of batch tests were conducted and the effects of solution pH, ion concentration, quantity of biosorbent and contact time on the bioremoval of phosphate ions were investigated. The biosorption data of kinetic and equilibrium were modeled using various mathematical equations. The phosphate removal increased with increased ion concentration and decreased with increased pH and biosorbent quantity values. The equilibrium state was reached within 120 min of exposure time. The process kinetics was best described by Elovich model while the isotherm data of biosorption best obeyed Freundlich equation. The obtained results revealed that the use of CTAB modified mix sawdust biosorbent presented interesting options for bioremediation of contaminated environments and waste recycling (as nutrient fertilizer and compost material).     

Characterization and pollution potential assessment of Tunceli, Turkey municipal solid waste open dumping site leachates

Environmental monitoring of leachate quality from an open municipal solid waste dumping site in Tunceli, Turkey was studied in this research. The most commonly examined pollution parameters were determined on a seasonal basis. The annual average 5-day biological oxygen demand (BOD₅) and chemical oxygen demand (COD) values of station points were measured as 70 and 425 mg/L, respectively, and also the average BOD₅/COD ratio (a measure of biodegradability) was calculated as 0.20. The low ratio of biodegradability and slightly alkaline pH values in the leachate samples indicated that the site was characterized by methanogenic conditions. The mean ammonium-nitrogen (NH₄ ⁺-N) and corresponding phosphate (orthophosphate) values were assayed as 70 and 11 mg/L, respectively. The average solids content in the leachates was measured as 4,681 mg/L (total solids) and 144 mg/L (suspended solids). Very low concentrations of iron, manganese, copper, and zinc in the leachate samples were found and the concentration of cadmium was measured below detection limits. Excessive amount of nutrients and high organic and inorganic pollutant content in the leachates pose serious pollution potential to the environment. Since no drainage system or bio treatment exists in this open dumping site, high permeability of natural soil at the site and in the surrounding area and very fractured and crackled rocks under natural soil are indicators of high groundwater pollution potential in this site.     

Biochemical properties of some Salvia L. species

Antioxidant capacity, total phenol and mineral contents of aerial parts of sage belonging to some Salvia species were established. The lowest and highest antioxidant values of Salvia dichroantha Stapf and Salvia heldreichiana Boiss. ex Benth. extracts were found as 73.855 and 80.207 mg GAE/g, respectively. While the highest total phenol was established in Salvia tomentosa Mil. (13.316 mg GAE/100 ml), the lowest level was found in Salvia halophila Hedge (6.168 mg GAE/100 ml). While K contents of plants changed between 14,518 and 24,171 mg/kg, Ca contents ranged between 12,402 and 18,553 mg/kg. P and Mg contents were found low compared with K and P values of plants. Mg content was changed between 2,118 and 2,914 mg/kg; the mean was calculated as 2,496 mg/kg. P contents of plants were determined between 1,385 to 1,910 mg/kg. As a microelement, Fe was found at the highest level. Fe contents of plants were found between 179 and 782 mg/kg.     

Measurement of Traffic Related Toxic Air Pollutants in an Urban Atmosphere

Nose-level measurements of air toxics were made along a busy urban street in Ottawa, Canada for 2 hr periods during morning, noon, and afternoon rush hours in the winter and summer of 2000. Measurements were also made in a commuter car and a transit bus during morning and afternoon commutes in 2000. The main objectives of the study were to establish a database, to determine temporal and seasonal variations and to determine the contribution of motor vehicle traffic to the measured toxic substance concentrations. Ottawa is an appropriate choice of location for the measurement of motor vehicle related toxic and reactive compounds, as it has virtually no industrial sources that could be contributing to the ambient loadings. Samples were collected for a total of 165 volatile organic compounds and 25 carbonyl compounds. Sampling and analytical methodologyare discussed and results are presented. Toluene, ethylene andformaldehyde were the most abundant pollutants in Ottawa during both winter and summer. Total non-methane hydrocarbon concentrationwas measured as 100 g m^-3 at nose-level measurements in Ottawa.     

Using of leaching reactant obtained from mill scale in hydrometallurgical copper extraction

Environmental Science and Pollution Research - This study, which covered a set of leaching processes at a few stages, investigated the inclusion of iron found in mill scale, which is a waste of the...