The need for ecocentrism in biodiversity conservation

Over the past 5 decades, scientists have been documenting negative anthropogenic environmental change, expressing increasing alarm, and urging dramatic socioecological transformation in response. A host of international meetings have been held, but the erosion of biological diversity continues to accelerate. Why, then, has no effective political action been taken? We contend that part of the answer may lie in the anthropocentric ethical premises and moral rhetoric typically deployed in the cause of conservation. We further argue that it is essential to advance moral arguments for biodiversity conservation that are not just based on perceived human interests but on ecocentric values, namely, convictions that species and ecosystems have value and interests that should be respected regardless of whether they serve human needs and aspirations. A broader array of moral rationales for biodiversity conservation, we conclude, would be more likely to lead to effective plans, adopted and enforced by governments, designed to conserve biological diversity. A good place to start in this regard would be to explicitly incorporate ecocentric values into the recommendations that will be made at the conclusion of the 15th meeting of the parties to the Convention on Biological Diversity, scheduled to be held in October 2020.     

Calibration of the Chemcatcher passive sampler for the monitoring of priority organic pollutants in water

An integrative passive sampler consisting of a C18 Empore disk receiving phase saturated with n-octanol and fitted with low-density polyethylene diffusion membrane was calibrated for the measurement of time-weighted average concentrations of hydrophobic micropollutants, including polyaromatic hydrocarbons and organochlorine pesticides, in water. The effect of temperature and water turbulence on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water was studied in a flow-through system under controlled conditions. It was found that the absorption of test analytes from water to the sampler is related to their desorption to water. This allows for the in situ calibration of the uptake of pollutants using offload kinetics of performance reference compounds. The sampling kinetics are dependent on temperature, and for most of the tested analytes also on the flow velocity. Sampler-water partition coefficients did not significantly change with temperature.     

Working conditions in a selected sample of call centre companies in Sweden

BACKGROUND: Call centres (CCs) are among the most rapidly growing forms of workplaces in Sweden. The purpose of the study was to describe and compare working conditions between operators at internal and external CC companies and work tasks of different complexity. METHOD: A questionnaire was answered by 1183 operators, 848 women and 335 men, from 28 different CCs. The questionnaire covered background factors, employment, working hours and remuneration, call logging and monitoring, duties, computer work and workplace design during the previous month. RESULTS: Operators at external companies and operators with low-complexity work tasks were younger, more often employed by the hour and worked on a varying roster. They spent longer time on customer calls and had less varied tasks. Additional remuneration, call logging and monitoring were more common at external companies and among operators with low-complexity work tasks. CONCLUSION: The working conditions varied between internal and external CCs. There was also a variation in working conditions between work tasks of different complexity. There were aspects of supervision style and organization of work at CCs, especially at external ones and those with low-complexity tasks that could introduce stress and lack of well being among the staff.     

Effect of chemophytostabilization practices on arbuscular mycorrhiza colonization of Deschampsia cespitosa ecotype Waryński at different soil depths

The effects of chemophytostabilization practices on arbuscular mycorrhiza (AM) of Deschampsia cespitosa roots at different depths in soils highly contaminated with heavy metals were studied in field trials. Mycorrhizal parameters, including frequency of mycorrhization, intensity of root cortex colonization and arbuscule abundance were studied. Correlations between concentration of bioavailable Cd, Zn, Pb and Cu in soil and mycorrhizal parameters were estimated. An increase in AM colonization with increasing soil depth was observed in soils with spontaneously growing D. cespitosa. A positive effect of chemophytostabilization amendments (calcium phosphate, lignite) on AM colonization was found in the soil layers to which the amendments were applied. Negative correlation coefficients between mycorrhizal parameters and concentration of bioavailable Cd and Zn in soil were obtained. Our results demonstrated that chemophytostabilization practices enhance AM colonization in D. cespitosa roots, even in soils fertilized with high rates of phosphorus.     

Occurrence of Norovirus and Hepatitis A Virus in Wild Mussels Collected from the Baltic Sea

The aim of the study was to define the occurrence of human noroviruses of genogroup I and II (NoV GI and NoV GII) and hepatitis A virus (HAV) in the Baltic Sea mussels. The shellfish samples were taken at the sampling sites located on the Polish coast. In total, 120 shellfish were tested as pooled samples using RT-PCR and hybridisation with virus specific probes. NoV GI was detected in 22 (18.3 %), NoV GII in 28 (23.3 %), and HAV in 9 (7.5 %) of the shellfish. The nucleotide sequence analysis of the detected NoV GII strains showed a 97.3–99.3 % similarity to GII.4 virus strain. This is the first report describing the NoV and HAV occurrence in wild Baltic mussels and their possible role as bioindicators of seawater contamination with human enteric viruses.     

Energy-efficient removal of carbamazepine in solution by electrocoagulation-electrofenton using a novel P-rGO cathode

In this study, carbamazepine (CBZ) decay in solution has been studied by coupling electrocoagulation with electro-Fenton (EC-EF) with a novel P-rGO/carbon felt (CF) cathode, aiming to accelerate the in-situ generation of •OH, instead of adding Fe²⁺ and H₂O₂. Firstly, the fabricated P-rGO and its derived cathode were characterized by XRD, SEM, AFM, XPS and electrochemical test (EIS, CV and LSV). Secondly, it was confirmed that the performance in removal efficiency and electric energy consumption (EEC) by EC-EF (k_obs=0.124 min⁻¹, EEC=43.98 kWh/kg CBZ) was better than EF (k_obs=0.069 min⁻¹, EEC=61.04 kWh/kg CBZ). Then, P-rGO/CF (k_obs=0.248 min⁻¹, EEC=29.47 kWh/kg CBZ, CE=61.04%) showed the best performance in EC-EF, among all studied heteroatom-doped graphene/CF. This superior performance may be associated with its largest layer spacing and richest C=C, which can promote the electron transfer rate and conductivity of the cathode. Thus, more H₂O₂ and •OH could be produced to degrade CBZ, and almost 100% CBZ was removed with k_obs being 0.337 min⁻¹ and the EEC was only 24.18 kWh/kg CBZ, under the optimal conditions (P-rGO loading was 6.0 mg/cm², the current density was 10.0 mA/cm², the gap between electrode was 2.0 cm). Additionally, no matter the influent is acidic, neutral or alkaline, no additional pH adjustment is required for the effluent of EC-EF. At last, an inconsecutive empirical kinetic model was firstly established to predict the effect of operating parameters on CBZ removal.     

Preparation of magnetic nanocomposite beads and optimizing the conditions for effective removal of U(VI) from aqueous solutions

Magnetic ion-imprinted polymers (IIPs) were prepared by precipitate polymerization and leached with HCl to remove uranium. Their ability to remove hexavalent uranium from wastewater effluents was studied. Batch adsorption studies to determine the optimum conditions of U(VI) removal were conducted at different levels of sample pH, sorbent amount, agitation time, and initial uranium concentration. It was observed that, under optimum conditions (i.e. pH 4, adsorbent amount of 50 mg, 45 min agitation time, and initial U(VI) concentration of 2 mg L^?1), the maximum removal of U(VI) cations was >98% and 80% for the magnetic IIP and the corresponding magnetic non-imprinted polymers (NIP), respectively. Langmuir and Freundlich isotherms were used to describe the adsorption of U(VI) onto magnetic IIP and NIP. The adsorption capacity of U(VI) was determined to be 1.06 and 0.85 mg g^?1 for the two isotherms, respectively. The order of selectivity was found to be U(VI) > Fe(III) > Pb(II). For six cycles of regeneration and reuse, the magnetic polymers maintained their stabilities with only a 4% loss in the extraction efficiency. The average extraction efficiencies of the magnetic polymers for the spiked acid mine drainage and sewage wastewater effluents were 71% and 58% for the magnetic IIP and NIP, respectively. From powder X-ray diffraction analysis, application of the Scherrer equation yielded magnetic nanoparticles of an average mean diameter of 11.9 nm. Thermo-gravimetric analysis revealed that the HCl-leached magnetic polymers had a magnetite residual weight of 5%.     

Tributyltin (TBT) induces oxidative stress and modifies lipid profile in the filamentous fungus Cunninghamella elegans

To investigate the response of the tributyltin-degrading fungal strain Cunninghamella elegans to the organotin, a comparative lipidomics strategy was employed using an LC/MS-MS technique. A total of 49 lipid species were identified. Individual phospholipids were then quantified using a multiple reaction monitoring method. Tributyltin (TBT) caused a decline in the amounts of many molecular species of phosphatidylethanolamine or phosphatidylserine and an increase in the levels of phosphatidic acid, phosphatidylinositol and phosphatidylcholine. In the presence of TBT, it was observed that overall unsaturation was lower than in the control. Lipidome data were analyzed using principal component analysis, which confirmed the compositional changes in membrane lipids in response to TBT. Additionally, treatment of fungal biomass with butyltin led to a significant increase in lipid peroxidation. It is suggested that modification of the phospholipids profile and lipids peroxidation may reflect damage to mycelium caused by TBT.     

Tailoring mesoporosity of poly(furfuryl alcohol)-based activated carbons and their ability to adsorb organic compounds from water

In this work it was shown that polymers can be recycled into a promising adsorbent for organic dyes and phenols waste removal. For this, a series of activated carbons (ACs) were produced from mixture of ferrocene or titanium acetylacetonate with poly(furfuryl alcohol) (PFA) by steam activation. The introduction of ferrocene as Fe precursor was found to be an efficient catalyst in mesoporosity development during carbonization and subsequent steam activation at 850 °C, whereas the polymer based only and titanium-doped ACs are typically microporous. The porous structure parameters were determined from nitrogen adsorption isotherms measured at 77 K. Scanning electron microscopy was applied to monitor the metal distribution of metal-loaded char and the surface morphology of activated carbons. The adsorption capacity was found to be dependent mainly on pore size distribution. In the case of phenol adsorption, the adsorption was defined by volume of pore with size 0.8–1.4 nm; whereas, for Congo red best fit was observed for volume of pore with size 2–5 nm.

     

Alkyl polyglucosides as cell surface modification factors: influence of the alkyl chain length

The use of surfactants in a bioremediation process is aimed at increasing the efficiency of the removal of hydrophobic contaminants from the environment. The subjects of the study were three alkyl polyglucosides (APGs) of different alkyl chain length: Glucopon 215 CS UP, Glucopon 600 CS UP, and Glucopon 650 EC. The impact of these surfactants on the surface properties of the test strain Pseudomonas fluorescens ATCC 14700, as well as on the biodegradation of diesel was tested. It was observed, that the length of alkyl chain has an influence on the cell surface properties. The modification of the cell surface hydrophobicity and the electrokinetic potential on the bacteria cells is dependent on the structure of Glucopon molecules. The elongation of alkyl chains in surfactant molecule caused an increase of the hydrophobic properties and a reduction of the electrokinetic potential on the bacteria cells. Moreover, the use of APGs below critical micelle concentration caused an increase of diesel oil biodegradation, especially in the case of Glucopons with longer alkyl chain (Glucopon 600 CS UP and 650 EC). The better diesel oil removal by tested strain after surfactant addition was correlated with the hydrophobic properties of bacteria strain.