Application of lean flammability limit study and large eddy simulation to burner development for an oxy-fuel combustion system

Previously, we developed a model to predict lean flammability limit L and flame propagation velocity Sb for pulverized coal. In the present paper, we have extended the model to apply it in development of oxy-fuel combustion systems. The basic model consists of two particles. One of the two particles burns first, then, the other particle is ignited by the heat of combustion of the one burning particle. We analyzed at what distance the first burning particle could ignite the next particle, and how fast the first burning particle could ignite the next particle. The model was verified both for air and oxy-fuel combustion conditions. Next, a method to support burner development was examined by using the model. Local Sb and L near the ignition points of the burner could be analyzed from the concentration and temperature profiles of CFD results. Flame stability was judged by the calculated Sb and L profiles, and past results of blow-off limits obtained with actual- and pilot-scale experiments. A DS^®T-burner was developed by Hitachi Power Europe, and installed at the Schwarze Pumpe pilot plant. Combination of the technique and large eddy simulation was applied to confirmation of the system.     

Chronic kidney diseases of uncertain etiology (CKDue) in Sri Lanka: geographic distribution and environmental implications

The increase in the number of chronic kidney disease (CKD) patients from the north central region of Sri Lanka has become a environmental health issue of national concern. Unlike in other countries where long-standing diabetes and hypertension are the leading causes of renal diseases, the majority of CKD patients from this part of Sri Lanka do not show any identifiable cause. As the disease is restricted to a remarkably specific geographical terrain, particularly in the north central dry zone of the country, multidisciplinary in-depth research studies are required to identify possible etiologies and risk factors. During this study, population screening in the prevalent region and outside the region, analysis of geoenvironmental and biochemical samples were carried out. Population screening that was carried out using a multistage sampling technique indicated that the point prevalence of CKD with uncertain etiology is about 2–3% among those above 18 years of age. Drinking water collected from high-prevalent and non-endemic regions was analyzed for their trace and ultratrace element contents, including the nephrotoxic heavy metals Cd and U using ICP-MS. The results indicate that the affected regions contain moderate to high levels of fluoride. The Cd contents in drinking water, rice from affected regions and urine from symptomatic and non-symptomatic patients were much lower indicating that Cd is not a contributing factor for CKD with uncertain etiology in Sri Lanka. Although no single geochemical parameter could be clearly and directly related to the CKD etiology on the basis of the elements determined during this study, it is very likely that the unique hydrogeochemistry of the drinking water is closely associated with the incidence of the disease.     

Risk reduction concept to provide design criteria for Emergency Systems for onshore LNG plants

The functional safety requirement is widely applied in the process plant industry in accordance with the international standards, such as IEC and ISA. The requirement is defined as safety integrity level (SIL) based on the risk reduction concept for protection layers, from original process risk to tolerable risk level. Although the standards specify both, the Prevention System and the Emergency System, as level of protection layers, the standards specify in detail only the use of the Prevention System (i.e., Safety Instrumented System (SIS)). The safety integrity level is not commonly allocated to the Emergency System (e.g., Fire and Gas System, Emergency Shutdown System and Emergency Depressuring System). This is because the required risk reduction can be normally achieved by only the Prevention System (i.e., SIS and Pressure Safety Valve (PSV)). Further, the risk reduction level for the Emergency System is very difficult to be quantified by the actual SIL application (i.e., evaluated based on the single accident scenario, such as an accident from process control deviation), since the escalation scenarios after Loss of Containment (LOC) greatly vary depending on the plant design and equipment. Consequently, there are no clear criteria for evaluating the Emergency System design. This paper aims to provide the functional safety requirement (i.e., required risk reduction level based on IEC 61508 and 61511) as design criteria for the Emergency System.In order to provide clear criteria for the Emergency System evaluation, a risk reduction concept integrated with public’s perception of acceptable risk criteria is proposed and is applied to identify the required safety integrity level for the Emergency System design. Further, to verify the safety integrity levels for the Emergency Systems, the probabilistic model of the Emergency Systems was established considering each Emergency System (e.g., Fire and Gas System, Emergency Shutdown System and Emergency Depressuring System) relation as the Overall Emergency System. This is because the Overall Emergency System can achieve its goal by the combined action of each individual system, including inherent safe design, such as separation distance.The proposed approach applicability was verified by conducting a case study using actual onshore Liquefied Natural Gas Plant data. Further, the design criteria for Emergency Systems for LNG plants are also evaluated by sensitivity analysis.     

NUTRIENT LOAD CHARACTERIZATION FROM INTEGRATED SOURCE DATA FOR THE LOWER MISSISSIPPI RWER1

ABSTRACT: Nutrient data from all available sources for the lower Mississippi River were examined for potential differences among sampling agencies and geographic locations for the period between 1960 and 1998. Monthly means grouped by parameter, sampling location and agency, were calculated and compared as paired sets, excluding those months where data were not available for both sets. Some significant differences were found between various agencies collecting nutrient data on the river, as well as between various stretches of river, especially in the case of phosphorus nutrient data. Results were used to synthesize data sets from which a history of nutrient loading in the Mississippi River was determined. General trends in nitrate+nitrite, total Kjeldahl nitrogen, orthophosphate, total phosphorus and silica loads, as well as changes in nutrient proportions and the specific limiting nutrient (by month) are reported. This study provides a useful summary of contemporary and historical nutrient data that may assist in the evaluation of Mississippi River water quality and its potential effect on the Gulf of Mexico.     

Chemical and mineralogical evaluation of slag products derived from the pyrolysis/melting treatment of MSW

This paper provides the results of studies on the characteristics of novel material derived from pyrolysis/melting treatment of municipal solid waste in Japan. Slag products from pyrolysis/melting plants were sampled for the purpose of detailed phase analysis and characterization of heavy metal-containing phases using optical microscopy, electron probe microanalysis (EPMA), XRF and XRD. The study revealed that the slag material contains glass (over 95%), oxide and silicate minerals (spinel, melilite, pseudowollastonite), as well as individual metallic inclusions as the major constituents. A distinct chemical diversity was discovered in the interstitial glass in terms of silica content defined as low and high silica glass end members. Elevated concentrations of Zn, Cr, Cu, Pb and Ba were recorded in the bulk composition. Cu, Pb and Ba behave as incompatible elements since they have been markedly characterized as part of polymetallic alloys and insignificantly sulfides in the form of spherical metallic inclusions associated with tracer amounts of other elements such as Sb, Sn, Ni, Zn, Al, P and Si. In contrast, an appreciable amount of Zn is retained by zinc-rich end members of spinel and partially by melilite and silica glass. Chromium exhibits similar behavior, and is considerably held by Cr-rich spinel. The intense incorporation of Zn and Cr into spinel indicates the very effective enrichment of these two elements into phases more environmentally resistant than glass. There was no evidence, however, that Cu and Pb enter into the structure of the crystalline silicates or oxides that may lead to their easier leachability upon exposure to the environment.     

Crystallization Behavior and Dynamic Mechanical Properties of Poly(l-Lactic Acid) with Poly(Ethylene Glycol) Terminated by Benzoate

Effect of the addition of poly(ethylene glycol) terminated by benzoate (PEG-BA) on the crystallization behavior and dynamic mechanical properties of poly(l-lactic acid) PLLA is studied as compared with poly(ethylene glycol) (PEG-OH). It is found that PEG-BA is miscible with PLLA and shows good plasticizing effect. Because PEG-OH having the same degree of polymerization is immiscible with PLLA, the end group in PEG-BA, i.e., benzoate, plays an important role in the miscibility. Furthermore, PEG-BA does not induce the PLLA degradation at melt-processing, whereas PEG-OH leads to the hydrolysis degradation. Finally, the addition of PEG-BA pronounces the crystallization rate of PLLA at low crystallization temperatures and thus enhances the degree of crystallinity at conventional processing. Consequently, the temperature dependence of dynamic mechanical properties are similar to that for isotactic polypropylene.     

Direct determination of neonicotinoid insecticides in an analytically challenging crop such as Chinese chives using selective ELISAs

ABSTRACT

Easy-to-use commercial kit-based enzyme-linked immunosorbent assays (ELISAs) have been used to detect neonicotinoid dinotefuran, clothianidin and imidacloprid in Chinese chives, which are considered a troublesome matrix for chromatographic techniques. Based on their high water solubility, water was used as an extractant. Matrix interference could be avoided substantially just diluting sample extracts. Average recoveries of insecticides from spiked samples were 85–113%, with relative standard deviation of <15%. The concentrations of insecticides detected from the spiked samples with the proposed ELISA methods correlated well with those by the reference high-performance liquid chromatography (HPLC) method. The residues analyzed by the ELISA methods were consistently 1.24 times that found by the HPLC method, attributable to loss of analyte during sample clean-up for HPLC analyses. It was revealed that the ELISA methods can be applied easily to pesticide residue analysis in troublesome matrix such as Chinese chives.     

Influence of arsenic stress on synthesis and localization of low-molecular-weight thiols in Pteris vittata

The roles of low-molecular-weight thiols (LMWTs), such as glutathione and phytochelatins, in arsenic (As) tolerance and hyperaccumulation in Pteris vittata an As-hyperaccumulator fern remain to be better understood. This study aimed to thoroughly characterize LMWT synthesis in P. vittata to understand the roles played by LMWTs in As tolerance and hyperaccumulation. LMWT synthesis in P. vittata was induced directly by As, and not by As-mediated oxidative stress. Expression of PvECS2, one of the putative genes of γ-glutamylcysteine synthetase (γECS), increases in P. vittata shoots at 48 h after the onset of As exposure, almost corresponding to the increase in the concentrations of γ-glutamylcysteine and glutathione. Furthermore, localization of As showed similar trends to those of LMWTs in fronds at both whole-frond and cellular levels. This study thus indicates the specific contribution of LMWTs to As tolerance in P. vittata. γECS may be responsible for the As-induced enhancement of LMWT synthesis.     

Detection of dicofol and related pesticides in human breast milk from China, Korea and Japan

Previously, we demonstrated that the concentrations of DDTs were greater in breast milk collected from Chinese mothers than from Japanese and Korean mothers. To investigate dicofol as a possible source of the DDTs in human breast milk, we collected breast milk samples from 2007 to 2009 in China (Beijing), Korea (Seoul, Busan) and Japan (Sendai, Takarazuka and Takayama). Using these breast milk samples, we quantified the concentrations of dichlorobenzophenone, a pyrolysis product of dicofol (simply referred to as dicofol hereafter), dichlorodiphenyltrichloroethane and its metabolites (DDTs) using GC-MS. Overall, 12 of 14 pooled breast milk samples from 210 mothers contained detectable levels of dicofol (>0.1 ng g⁻¹ lipid). The geometric mean concentration of dicofol in the Japanese breast milk samples was 0.3 ng g⁻¹ lipid and significantly lower than that in Chinese (9.6 ng g⁻¹ lipid) or Korean breast milk samples (1.9 ng g⁻¹ lipid) (p < 0.05 for each). Furthermore, the ΣDDT levels in breast milk from China were 10-fold higher than those from Korea and Japan. The present results strongly suggest the presence of extensive emission sources of both dicofol and DDTs in China. However, exposure to dicofol cannot explain the large exposure of Chinese mothers to DDTs because of the trace levels of dicofol in the ΣDDTs. In the present study, dicofol was confirmed to be detectable in human breast milk. This is the first report to identify dicofol in human samples.     

Dietary patterns and blood levels of PCDDs, PCDFs, and dioxin-like PCBs in 1656 Japanese individuals

The association between dietary patterns and blood dioxin levels has not been fully investigated. The present study population consisted of 755 men and 901 women (aged 15-73 years) living in 90 different areas of 30 prefectures of Japan. Dietary habits were assessed by inquiring about the consumption frequency of 28 foods, food groups and beverages. In addition, the blood levels of 29 polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzo-furans (PCDFs), and dioxin-like polychlorinated biphenyl (DL-PCBs) congeners were determined by high-resolution gas chromatography/mass spectrometry. The median total toxicity equivalent (TEQ) in the blood, which was calculated on the basis of the toxicity equivalency factors of WHO (2005), was 16 pg TEQ g⁻¹ lipid. Principal component analysis identified five dietary patterns: Healthy diet (high intake of vegetables and fruits); Meat/High fat intake (high intake of meat, meat products, and eggs); Seafood and Alcohol (high intake of fish, shellfish, and alcoholic beverages); Miscellaneous; and Milk products and Alcohol intake (high intake of milk, Milk products, and alcoholic beverages). After adjusting for sex, age, body mass index, and smoking habits, the Seafood and Alcohol pattern scores were significantly related to higher blood levels of total TEQ and PCDDs/PCDFs/DL-PCBs, and the Milk products and Alcohol pattern scores were correlated with higher blood levels of DL-PCBs. More detailed analysis showed that the intake frequencies for alcoholic beverages and seafood were independently and positively associated with total TEQ and the TEQ of PCDFs and DL-PCBs. The association between alcoholic beverage intake and PCDDs was also significant. Analysis of dietary patterns may be useful for identifying the dietary characteristics of individuals with a high dioxin body burden.