Mitigating nitrous oxide and methane emissions from soil in rice-wheat system of the Indo-Gangetic plain with nitrification and urease inhibitors

Mitigation of methane (CH4) and nitrous oxide (N2O) emissions from soil is important to reduce the global warming. Efficacy of five nitrification inhibitors, i.e. neem (Azadirachta melia) cake, thiosulphate, coated calcium carbide, neem oil coated urea and dicyandiamide (DCD) and one urease inhibitor, hydroquinone, in mitigating N2O and CH4 emissions from fertilized soil was tested in rice-wheat system in the Indo-Gangetic plains. The closed chamber technique was used for the collection of gas samples, which were analyzed using gas chromatography. Reduction in N2O emission on the application of nitrification/urease inhibitors along with urea ranged from 5% with hydroquinone to 31% with thiosulphate in rice and 7% with hydroquinone to 29% with DCD in wheat crop. The inhibitors also influenced the emission of CH4. While application of neem coated urea, coated calcium carbide, neem oil and DCD reduced the emission of CH4; hydroquinone and thiosulphate increased the emission when compared to urea alone. However, the global warming potential was lower with the inhibitors (except hydroquinone) as compared to urea alone, suggesting that these substances could be used for mitigating greenhouse gas emission from the rice-wheat systems.     

Emission of nitrous oxide from rice-wheat systems of Indo-Gangetic plains of India

Nitrous oxide (N₂O) accounts for 5%of the total enhanced greenhouse effect and responsiblefor the destruction of the stratospheric ozone. The rice-wheat cropping system occupying 26 million ha ofproductive land in Asia could be a major source ofN₂O as most of the fertilizer N in this region isconsumed by this system. Emission of N₂O asinfluenced by application of urea, urea plus farm yardmanure (FYM), and urea plus dicyandiamide (DCD), anitrification inhibitor, was studied in rice-wheatsystems of Indo-Gangetic plains of India. Total emissionof N₂O-N from the rice-wheat systems varied between654 g ha^-1 in unfertilized plots and 1570 g ha^-1 in urea fertilized plots. Application of FYM and DCDreduced emission of N₂O-N in rice. The magnitude ofreduction was higher with DCD. In wheat also N₂O-Nemission was reduced by DCD. FYM applied in rice had noresidual effect on N₂O-N emission in wheat. In riceintermittent wetting and drying condition of soilresulted in higher N₂O-N emission than that ofsaturated soil condition. Treatments with 5 irrigationsgave higher emissions in wheat than those with 3irrigations. In rice-wheat system, typical of a farmer'sfield in Indo-Gangetic plains, where 240 kg N isgenerally applied through urea, N₂O-N emission is1570 g ha^-1 (0.38% of applied N) and application ofFYM and DCD reduced it to 1415 and 1096 g ha^-1,respectively.     

Utilization of agricultural waste biomass and recycling toward circular bioeconomy

Environmental Science and Pollution Research - The major global concern on energy is focused on conventional fossil resources. The burning of fossil fuels is an origin of greenhouse gas emissions...     

Exploring the therapeutic potential of omega-3 fatty acids in depression

Environmental Science and Pollution Research - Omega-3 fatty acids have been acknowledged for their number of holdings on an individual’s health. Not only in physical valuation but also in...     

Nanofluid heat transfer under mixed convection flow in a tube for solar thermal energy applications

The solar flat plate collector operating under different convective modes has low efficiency for energy conversion. The energy absorbed by the working fluid in the collector system and its heat transfer characteristics vary with solar insolation and mass flow rate. The performance of the system is improved by reducing the losses from the collector. Various passive methods have been devised to aid energy absorption by the working fluid. Also, working fluids are modified using nanoparticles to improve the thermal properties of the fluid. In the present work, simulation and experimental studies are undertaken for pipe flow at constant heat flux boundary condition in the mixed convection mode. The working fluid at low Reynolds number in the mixed laminar flow range is undertaken with water in thermosyphon mode for different inclination angles of the tube. Local and average coefficients are determined experimentally and compared with theoretical values for water-based Al₂O₃ nanofluids. The results show an enhancement in heat transfer in the experimental range with Rayleigh number at higher inclinations of the collector tube for water and nanofluids.     

Therapeutic potential of dopamine agonists in the treatment of type 2 diabetes mellitus

Environmental Science and Pollution Research - Diabetes is a global health concern that has affected almost 415 million people globally. Bromocriptine is a dopamine D2 agonist, which is a Food and...     

Physicochemical variations in atmospheric aerosols recorded at sea onboard the Atlantic–Mediterranean 2008 Scholar Ship cruise (Part II): Natural versus anthropogenic influences revealed by PM10 trace element geochemistry

The geochemistry of PM₁₀ filter samples collected at sea during the Scholar Ship Atlantic–Mediterranean 2008 research cruise reveals a constantly changing compositional mix of pollutants into the marine atmosphere. Source apportionment modelling using Positive Matrix Factorization identifies North African desert dust, sea spray, secondary inorganic aerosols, metalliferous carbon, and V–Ni-bearing combustion particles as the main PM₁₀ factors/sources. The least contaminated samples show an upper continental crust composition (UCC)-normalised geochemistry influenced by seawater chemistry, with marked depletions in Rb, Th and the lighter lanthanoid elements, whereas the arrival of desert dust intrusions imposes a more upper crustal signature enriched in “geological” elements such as Si, Al, Ti, Rb, Li and Sc. Superimposed on these natural background aerosol loadings are anthropogenic metal aerosols (e.g. Cu, Zn, Pb, V, and Mn) which allow identification of pollution sources such as fossil fuel combustion, biomass burning, metalliferous industries, and urban–industrial ports. A particularly sensitive tracer is La/Ce, which rises in response to contamination from coastal FCC oil refineries. The Scholar Ship database allows us to recognise seaborne pollution sourced from NW Africa, the Cape Verde and Canary islands, and European cities and industrial complexes, plumes which in extreme cases can produce a downwind deterioration in marine air quality comparable to that seen in many cities, and can persist hundreds of kilometres from land.     

Preparation and characterization of sorbents prepared from ash (waste material) for sulfur dioxide (SO2) removal

Sorbents synthesized from various types of ash (coal fly ash, coal bottom ash, oil palm ash, and incinerator ash) for flue gas desulfurization were investigated. The sorbents were prepared by mixing the ashes with calcium oxide and calcium sulfate using the water hydration method. The effects of various sorbent preparation variables, such as the hydration period, the ratio of calcium oxide to ash, and the amount of calcium sulfate, on the Brunauer-Emmett-Teller (BET)-specific surface area of the resulting sorbent were studied using a two-level full factorial design. The surface area of the sorbents obtained range from 15.4 to 122.1m²/g. Regression models were developed to correlate the significant variables to the surface area of the sorbents. An analysis of variance (ANOVA) showed that the model was significant at a confidence level of 95%. It was found that apart from all the individual variables studied, interactions between variables also exerted a significant influence on the surface area of the sorbent. From the activity test results, it was found that sorbents prepared from coal fly ash and oil palm ash have the highest SO₂ absorption capacity. Scanning electron microscope (SEM) analysis showed that the sorbent was composed of a compound with a high structural porosity, while an X-ray diffraction spectrum showed that calcium aluminum silicate hydrate compounds are the main products of the hydration reaction.     

APPLICATION OF SCS INFILTRATION MODEL1

ABSTRACT: The SCS infiltration model was applied to the Ralston Creek watershed in eastern Iowa. The criteria to determine the various model parameters were revised to obtain a better agreement between the observed and computed total runoffs. A procedure to calibrate the infiltration model is presented. The infiltration model was used in conjunction with an overland flow model to develop flood hydrographs. The results indicate that SCS infiltration model adequately describe the distribution of losses.