Cocoa Intensification Scenarios and Their Predicted Impact on CO<Subscript>2</Subscript> Emissions,Biodiversity Conservation,and Rural Livelihoods in the Guinea Rain Forest of West Africa

The Guinean rain forest (GRF) of West Africa, identified over 20 years ago as a global biodiversity hotspot, had reduced to 113,000 km² at the start of the new millennium which was 18% of its original area. The principal driver of this environmental change has been the expansion of extensive smallholder agriculture. From 1988 to 2007, the area harvested in the GRF by smallholders of cocoa, cassava, and oil palm increased by 68,000 km². Field results suggest a high potential for significantly increasing crop yields through increased application of seed-fertilizer technologies. Analyzing land-use change scenarios, it was estimated that had intensified cocoa technology, already developed in the 1960s, been pursued in Cote d’Ivoire, Ghana, Nigeria and Cameroon that over 21,000 km² of deforestation and forest degradation could have been avoided along with the emission of nearly 1.4 billion t of CO₂. Addressing the low productivity of agriculture in the GRF should be one of the principal objectives of REDD climate mitigation programs.     

Towards a renewed research agenda in ecotoxicology

New concerns about biodiversity, ecosystem services and human health triggered several new regulations increasing the need for sound ecotoxicological risk assessment. The PEER network aims to share its view on the research issues that this challenges. PEER scientists call for an improved biologically relevant exposure assessment. They promote comprehensive effect assessment at several biological levels. Biological traits should be used for Environmental risk assessment (ERA) as promising tools to better understand relationships between structure and functioning of ecosystems. The use of modern high throughput methods could also enhance the amount of data for a better risk assessment. Improved models coping with multiple stressors or biological levels are necessary to answer for a more scientifically based risk assessment. Those methods must be embedded within life cycle analysis or economical models for efficient regulations. Joint research programmes involving humanities with ecological sciences should be developed for a sound risk management.     

Profiling climate change vulnerability of forest indigenous communities in the Congo Basin

The livelihood strategies of indigenous communities in the Congo Basin are inseparable from the forests, following their use of forest ecosystem goods and services (FEGS). Climate change is expected to exert impacts on the forest and its ability to provide FEGS. Thus, human livelihoods that depend on these FEGS are intricately vulnerable to climate impacts. Using the livelihood strategies of the two main forest indigenous groups; the Bantus and Pygmies, of the high forest zone of southern Cameroon; this paper examines the nature and pattern of their vulnerability to different climate risks as well as highlights how place of settlement in the forest contributes to the vulnerability of people in forest systems. Forests provide different capitals as FEGS and make direct and indirect contributions to livelihoods which are exploited differently by the two indigenous groups. The results show that vulnerability of forest communities is structured by lifestyle, culture and the livelihood strategies employed which are largely shaped by the place of settlement in the forest. The Pygmies living within the forests are engaged in nomadic gathering and foraging of non-timber forest resources. The Bantus prefer forest margins and are mostly preoccupied with sedentary farming, using the forest as additional livelihood opportunity. The contrasting lifestyles have implications on their vulnerability and adaptation to climate impacts which need to be taken into considerations in planning and implementation of national climate change adaptation strategies.     

Chemical composition of the NH3-HNO3-H2SO4-NaCl system in the atmosphere of Athens,Greece

This paper presents a procedure for estimating the distribution of ionic material in the NH₃-HNO₃-H₂SO₄-NaCl system and applies this procedure in a particular case. The data used were measurements of HNO₃, NH₃, NO ₃ ^– , SO ₄ ^– , NH ₄ ⁺ Cl^– and Na⁺ performed during February 1989 – February 1990 in a central Athens street with high traffic density. According to the procedure, ions combine in the following manner: Na⁺ combines preferentially with SO ₄ ^– , then with NO ₃ ^– , followed by NH ₄ ⁺ with the remaining SO ₄ ^– and then with the remaining NO ₃ ^– to form bisulphates, sulphates and nitrates. The combination procedure showed that the main constituents of the NH₃-HNO₃-H₂SO₄-NaCl system are primarily (NH₄)₂SO₄ and, to a lesser extent, NH₄NO₃ and NH₄HSO₄, with mean and maximum concentrations, during morning hours, (NH₄)₂SO₄: 14.5 (max 46.8), NH₄NO₃: 2.97 (max 23) and NH₄HSO₄: 1.78 (max 40.6) µg m^–3. Lower concentations of Na₂SO₄, NaHSO₄, NaNO₃ and NH₄Cl and very low concentrations of H₂SO₄ are also present, depending on the availability of NaCl. It became apparent from the ionic distribution that there is sufficient NH₃ to neutralize the H₂SO₄ and HNO₃. It was also shown that a significant fraction of the HNO₃, especially on days with high pollution, occurs as aqueous NO ₃ ^– . A number of empirical equations have been proposed, which enable the approximate estimation of the constituents of the NH₃-HNO₃-H₂SO₄-NaCl system from air pollution monitoring data and meteorological parameters.     

Water Quality Functions of Riparian Forest Buffers in Chesapeake Bay Watersheds

/ Maryland, Virginia, and Pennsylvania, USA, have agreed to reduce nutrient loadings to Chesapeake Bay by 40% by the year 2000. This requires control of nonpoint sources of nutrients, much of which comes from agriculture. Riparian forest buffer systems (RFBS) provide effective control of nonpoint source (NPS) pollution in some types of agricultural watersheds. Control of NPS pollution is dependent on the type of pollutant and the hydrologic connection between pollution sources, the RFBS, and the stream. Water quality improvements are most likely in areas of where most of the excess precipitation moves across, in, or near the root zone of the RFBS. In areas such as the Inner Coastal Plain and Piedmont watersheds with thin soils, RFBS should retain 50%-90% of the total loading of nitrate in shallow groundwater, sediment in surface runoff, and total N in both surface runoff and groundwater. Retention of phosphorus is generally much less. In regions with deeper soils and/or greater regional groundwater recharge (such as parts of the Piedmont and the Valley and Ridge), RFBS water quality improvements are probably much less. The expected levels of pollutant control by RFBS are identified for each of nine physiographic provinces of the Chesapeake Bay Watershed. Issues related to of establishment, sustainability, and management are also discussed.KEY WORDS: Riparian forest buffers; Chesapeake Bay; Nonpoint source pollution; Nitrogen; Phosphorus; Sediment     

Prediction of two-phase capillary pressure-saturation relationships in fractional wettability systems

Capillary pressure/saturation data are often difficult and time consuming to measure, particularly for non-water-wetting porous media. Few capillary pressure/saturation predictive models, however, have been developed or verified for the range of wettability conditions that may be encountered in the natural subsurface. This work presents a new two-phase capillary pressure/saturation model for application to the prediction of primary drainage and imbibition relations in fractional wettability media. This new model is based upon an extension of Leverett scaling theory. Analysis of a series of DNAPL/water experiments, conducted for a number of water/intermediate and water/organic fractional wettability systems, reveals that previous models fail to predict observed behavior. The new Leverett–Cassie model, however, is demonstrated to provide good representations of these data, as well as those from two earlier fractional wettability studies. The Leverett–Cassie model holds promise for field application, based upon its foundation in fundamental scaling principles, its requirement for relatively few and physically based input parameters, and its applicability to a broad range of wetting conditions.     

Review of light-duty diesel and heavy-duty diesel gasoline inspection programs

Emissions from diesel vehicles and gas-powered heavy-duty vehicles are becoming a new focus of many inspection and maintenance (I/M) programs. Diesel particulate matter (PM) is increasingly becoming more recognized as an important health concern, while at the same time, the public awareness of diesel PM emissions because of their visibility have combined to increase the focus on diesel emissions in the United States. This has resulted in an increased interest by some states in including heavy-duty vehicle testing in their I/M program. This paper provides an overview of existing I/M programs focused on testing light-duty diesel vehicles, heavy-duty diesel vehicles, and heavy-duty gasoline vehicles (HDGVs). Information on 39 I/M programs in 27 different states in the United States plus 9 international inspection programs is included. Information on the status of diesel emissions technology and current test procedures is also presented. The goal is to provide useful information for air quality managers as they work to decide whether such I/M programs would be worth pursuing in their respective areas and in evaluating the emissions measurement technology to be used in the program. Testing of HDGVs is generally limited to idle testing, because dynamometer testing of these vehicles is not practical, and most were not certified on a chassis basis. Testing of diesel vehicles has mostly been limited to SAE J1667 "snap-idle" opacity testing. Cost-effective technology for measuring diesel emissions currently does not exist, and, therefore, opacity-type measurements, although not effective at reducing the pollutants of most significant health concern, will continue to be used.     

Measuring the effect of photocatalytic purifiers on indoor air hydrocarbons and carbonyl pollutants

Laboratory tests of photocatalytic air purifiers are usually performed with a single pollutant, in the parts per million by volume domain and at airflow rates < or =0.1 m3/hr. Clearly, it is necessary to probe photocatalytic materials and apparatuses under real conditions or conditions closely mimicking reality. Photocatalytic prototypes were placed in an ordinary room. To collect hydrocarbons over a shorter period (15 min) than with adsorbent-containing cartridges, solid-phase microextraction (SPME) was used. Typically, concentrations in substituted benzene hydrocarbons and tetrachloroethene were decreased to 20-35% of initial values; toluene and m- + p-xylene concentrations dropped to 2-6 parts per billion by volume, and o-xylene and benzene concentrations were still lower. In the absence of appropriate, commercialized SPME fibers, carbonyl compounds (both formed and destroyed by photocatalysis) were extracted using cartridges containing 2,4- dinitrophenylhydrazine-coated silica. The concentration ranges (in parts per billion by volume) were shifted to higher values in treated air: from 9-15.5 to 12.5-18 for methanal, from 1.5-3 to 8-11.5 for ethanal, and from 4.5-19 to 8-26.5 for propanone with the prototype used; these unprecedented results do not exclude using photocatalysis to treat air, but they illustrate that improvement is needed. Because these tests are time-consuming, preliminary tests are useful; results obtained with a 225-L closed-loop, airtight, photocatalytic reactor with an external turbine enabling the ambient air inside the reactor to be circulated through the purifier device at 15-450 m3/hr flow rates are reported.     

A Regional Approach to Projecting Land-Use Change and Resulting Ecological Vulnerability

This study explores ecological vulnerability to land-use change in the U.S. Mid-Atlantic Region by spatially extrapolating land and economic development, and overlaying these projections with maps of sensitive ecological resources. As individual extrapolations have a high degree of uncertainty, five methods with different theoretical bases are employed. Confidence in projections is increased for counties targeted by two or more projection methods. A county is considered at risk if it currently supports three or more sensitive resources, and is projected to experience significant growth by the year 2010 by two or more methods. Analysis designated 19 counties and two cities as at risk, highlighting within a large region the priority areas where state and regional efforts would contribute the most to integrating environmental considerations into the process of land development. The study also found that potentially severe ecological effects of future land-use change are not limited to the outskirts of major urban areas. Recreational demands on smaller communities with mountain and coastal resources are also significant, as are initiatives to promote economic development in rural areas of high ecological quality. This approach provides a comprehensive overview of potential regional development, leading to an objective prioritization of high-risk areas. The intent is to inform local planning and decision-making so that regional and cumulative ecological degradation are minimized.