Effects of near‐future ocean acidification,fishing, and marine protection on a temperate coastal ecosystem

Understanding ecosystem responses to global and local anthropogenic impacts is paramount to predicting future ecosystem states. We used an ecosystem modeling approach to investigate the independent and cumulative effects of fishing, marine protection, and ocean acidification on a coastal ecosystem. To quantify the effects of ocean acidification at the ecosystem level, we used information from the peer‐reviewed literature on the effects of ocean acidification. Using an Ecopath with Ecosim ecosystem model for the Wellington south coast, including the Taputeranga Marine Reserve (MR), New Zealand, we predicted ecosystem responses under 4 scenarios: ocean acidification + fishing; ocean acidification + MR (no fishing); no ocean acidification + fishing; no ocean acidification + MR for the year 2050. Fishing had a larger effect on trophic group biomasses and trophic structure than ocean acidification, whereas the effects of ocean acidification were only large in the absence of fishing. Mortality by fishing had large, negative effects on trophic group biomasses. These effects were similar regardless of the presence of ocean acidification. Ocean acidification was predicted to indirectly benefit certain species in the MR scenario. This was because lobster (Jasus edwardsii) only recovered to 58% of the MR biomass in the ocean acidification + MR scenario, a situation that benefited the trophic groups lobsters prey on. Most trophic groups responded antagonistically to the interactive effects of ocean acidification and marine protection (46%; reduced response); however, many groups responded synergistically (33%; amplified response). Conservation and fisheries management strategies need to account for the reduced recovery potential of some exploited species under ocean acidification, nonadditive interactions of multiple factors, and indirect responses of species to ocean acidification caused by declines in calcareous predators.     

Experimental investigation of wood combustion in a fixed bed with hot air

Waste combustion on a grate with energy recovery is an important pillar of municipal solid waste (MSW) management in the Netherlands. In MSW incinerators fresh waste stacked on a grate enters the combustion chamber, heats up by radiation from the flame above the layer and ignition occurs. Typically, the reaction zone starts at the top of the waste layer and propagates downwards, producing heat for drying and devolatilization of the fresh waste below it until the ignition front reaches the grate. The control of this process is mainly based on empiricism.MSW is a highly inhomogeneous fuel with continuous fluctuating moisture content, heating value and chemical composition. The resulting process fluctuations may cause process control difficulties, fouling and corrosion issues, extra maintenance, and unplanned stops. In the new concept the fuel layer is ignited by means of preheated air (T > 220 °C) from below without any external ignition source. As a result a combustion front will be formed close to the grate and will propagate upwards. That is why this approach is denoted by upward combustion.Experimental research has been carried out in a batch reactor with height of 4.55 m, an inner diameter of 200 mm and a fuel layer height up to 1 m. Due to a high quality two-layer insulation adiabatic conditions can be assumed. The primary air can be preheated up to 350 °C, and the secondary air is distributed via nozzles above the waste layer. During the experiments, temperatures along the height of the reactor, gas composition and total weight decrease are continuously monitored. The influence of the primary air speed, fuel moisture and inert content on the combustion characteristics (ignition rate, combustion rate, ignition front speed and temperature of the reaction zone) is evaluated.The upward combustion concept decouples the drying, devolatilization and burnout phase. In this way the moisture and inert content of the waste have almost no influence on the combustion process. In this paper an experimental comparison between conventional and reversed combustion is presented.     

The Journal of Coastal Conservation, 1995–2004

This paper concludes the publication of theJournal of Coastal Conservation from 1995–2004 after the European Coastal Union and the Publishers decided to terminate the production of the journal. We look back at the 206 research papers published in this period while concentrating on Geographical and ecological variation, Focuses and trends, and Progress in European coastal conservation and management. Three indices are added: (1) a list of the 206 papers; (2) an Author Index; and (3) a Subject Index based on the titles, keywords and some additional important subjects found in the tables and figures.     

Evaluating Flow Metric‐Based Stream Classification Systems to Support the Determination of Ecological Flows in North Carolina

Hydroecological classification systems are typically based on an assemblage of streamflow metrics and seek to divide streams into ecologically relevant classes. Assignment of streams to classes is suggested as an initial step in the process of establishing ecological flow standards. We used two distinct hydroecological river classification systems available within North Carolina to evaluate the ability of a hydrologic model to assign the same classes as those determined by observed streamflows and to assess the transferability of such systems to ungaged streams. Class assignments were examined by rate of overall matches, rate of class matches, spatial variability in matches, and time period used in class assignment. The findings of this study indicate assignments of stream class: (1) are inconsistent among different classification systems; (2) differ between observed and modeled data; and (3) are sensitive to the period of record within observed data. One clear source of inconsistency/sensitivity in class assignments lies with the use of threshold values for metrics that distinguish stream classes, such that even small changes in metric values can result in different class assignments. Because these two hydroecological classification systems are representative of other classification systems that rely on quantitative decision thresholds, it can be surmised that the use of such systems based on stream flow metrics is not a reliable approach for guiding ecological flow determinations.     

Levels, compositions, and inventory of polybrominated diphenyl ethers in sewage sludge of Guangdong Province, South China

Polybrominated diphenyl ethers (PBDEs) were measured in sewage sludge samples collected from major wastewater treatment plants in Guangdong Province, South China. Concentrations of ∑₃₉PBDE (all 39 compounds including tri- to hepta- PBDE congeners except for BDE-209) ranged from 3.6 to 428 ng/g dw with a mean value of 67.4 ng/g dw and a median value of 25.9 ng/g dw, and those of BDE-209 ranged from 9.9 to 5,010 ng/g dw (mean 1,024 ng/g dw and median 824 ng/g dw). The PBDE mixtures detected were mainly comprised of penta-, octa-, and deca-BDEs, with deca-BDE as the dominant constituent. The most abundant congeners, excluding BDE-209, were BDE-47, BDE-99, and BDE-183. Good correlations were found among the concentrations of BDE-47, BDE-99, BDE-100, BDE-138, and BDE-154 (r?>?0.8). However, poor correlations were found between the concentrations of BDE-209 and all other congeners (r?<?0.3). This fact suggests that most tri- to hepta-BDEs detected did not originate from decomposition of deca-BDE. The estimated annual emission of ∑_allPBDEs, ∑₃₉PBDEs, penta-BDE, octa-BDE, and deca-BDE to the Pearl River Delta environment (PRD), based on the sludge samples analyzed, amounts to 232, 20.2, 5.5, 1.7, and 212 kg per year, implicating sewage sludge as a significant source of PBDEs to the PRD environment.     

Assessment of sampling designs to measure riverine fluxes from the Pearl River Delta, China to the South China Sea

The Pearl River Delta (PRD), located in South China and adjacent to the South China Sea, is comprised of a complicated hydrological system; therefore, it was a great challenge to sample adequately to measure fluxes of organic and inorganic materials to the coastal ocean. In this study, several sampling designs, including five-point (the number of sampling points along the river cross-section and three samples collected at the upper, middle, and bottom parts at each vertical line), three-point (at the middle and two other profiles), one-point (at the middle profile), and single-point (upper, middle, or bottom sub-sampling point at the middle profile) methods, were assessed using total organic carbon (TOC) and suspended particulate matter (SPM) as the measurables. Statistical analysis showed that the three- and five-point designs were consistent with one another for TOC measurements (p > 0.05). The three- and one-point sampling methods also yielded similar TOC results (95% of the differences within 10%). Single-point sampling yielded considerably larger errors than the three- and one-point designs, relative to the results from the five-point design, but sampling at the middle sub-point from the middle profile of a river achieved a relatively smaller error than sampling at the upper or bottom sub-point. Comparison of the sampling frequencies of 12 times a year, four times a year, and twice a year indicated that the frequency of twice a year was sufficient to acquire representative TOC data, but larger sample size and higher sampling frequency were deemed necessary to characterize SPM.     

Quantifying Reductions of Mass‐Failure Frequency and Sediment Loadings From Streambanks Using Toe Protection and Other Means: Lake Tahoe,United States1

Abstract: Streambank erosion by mass‐failure processes represents an important form of channel adjustment and a significant source of sediment in disturbed streams. Mass failures regularly occur by a combination of hydraulic processes that undercut bank toes and geotechnical processes that cause bank collapse by gravity. Little if any quantitative information is available on the effectiveness of bank treatments on reducing erosion. To evaluate potential reduction in sediment loadings emanating from streambanks, the hydraulic and geotechnical processes responsible for mass failure were simulated under existing and mitigated conditions using a Bank‐Stability and Toe‐Erosion Model (BSTEM). Two critical erosion sites were selected from each of the three watersheds known to contribute the greatest amounts of fine sediment by streambank processes in the Lake Tahoe Basin. A typical high‐flow annual hydrograph was selected for analysis. Bank‐material strength data were collected for each layer as were species‐specific root‐reinforcement values. The effects of the first flow event on bank‐toe erosion were simulated using an excess shear‐stress approach. The resulting geometry was then exported into the bank‐stability submodel to test for the relative stability of the bank under peak flow and drawdown conditions. In this way, BSTEM was used iteratively for all flow events for both existing and mitigated conditions. On average, 13.6% of the material was eroded by hydraulic shear, the remainder by mass failures, which occurred about five times over the simulation period. Simulations with 1.0 m‐high rock‐toe protection showed a dramatic reduction in streambank erosion (69‐100%). Failure frequency for the simulation period was reduced in most cases to a single episode. Thus, an almost 90% reduction in streambank loadings was achieved by virtually eliminating the erosion of only 14% of the material that was entrained by hydraulic forces. Consequently, simulations show average load reductions of about an order of magnitude. Results stress the critical importance of protecting the bank toe‐region from steepening by hydraulic forces that would otherwise entrain previously failed and in situ bank materials, thereby allowing the upper bank to flatten (by failure) to a stable slope.     

Linear alkylbenzenes in riverine runoff of the Pearl River Delta (China) and their application as anthropogenic molecular markers in coastal environments

The average concentrations of ∑LABs (sum of C₁₀-C₁₃-LABs) in runoff samples collected from the eight major riverine outlets of the Pearl River Delta (PRD) of China ranged from 1.4 to 6124 ng/L in the dissolved phase and from 0.01 to 11.4 μg/g dry weight in the particulate phase during March 2005-February 2006. The annual riverine flux of ∑LABs from the PRD to the coastal ocean was estimated at approximately 14 tons/yr. The inventories of ∑LABs in agricultural lands of Guangdong Province ranged from 313 to 1825 kg/yr. The early and late rice fields were the major sink of LABs, accounting for approximately 68% of total LABs inventory in agricultural lands. The social-economically estimated annual discharge of LABs from household detergents in the PRD was ∼696 tons/yr, more than an order of magnitude higher than that estimated from field measurements (about 14 tons/yr), which was attributed to several factors.     

Experimental verification of a model describing solid phase microextraction (SPME) of freely dissolved organic pollutants in sediment porewater

To verify a theoretical mass balance and multiple compartment partitioning model developed to predict freely dissolved concentrations (FDCs) of hydrophobic organic chemicals (HOCs) using negligible depletion-solid phase microextraction (nd-SPME), a series of sediment slurry experiments were performed using disposable poly(dimethyl)siloxane (PDMS) coated-SPME fibers and (14)C-radiolabeled HOC analogs. First, pre-calibration of disposable PDMS coated fibers for four model compounds (phenanthrene, PCB 52, PCB 153 and p,p'-DDE) with good precision (PCB 52>PCB 153, and the measured and predicted C(pw) values were not substantially different from empirically determined values except for p,p'-DDE.     

Effect of condensed organic matter on solvent extraction and aqueous leaching of polycyclic aromatic hydrocarbons in soils and sediments

The contents of nonhydrolyzable organic matter (NHC) and black carbon (BC) were measured in soils and sediments from the Pearl River Delta, South China. Polycyclic aromatic hydrocarbons (PAHs) were extracted respectively by Soxhlet and an accelerated solvent extraction device (ASE) using different solvents. In addition, sequential aqueous leaching at different temperatures was carried out. The PAH content extracted with the sequential three solvent ASE is two times higher than that using the Soxhlet extraction method. The relationship of the PAH content with the NHC content is very significant. The PAH concentrations measured at various temperature steps fit well to the Van't Hoff equation and the enthalpy was estimated. The investigation indicates that condensed organic matter such as kerogen carbon, aged organic matter, and BC is relevant for the extraction and distribution of native PAHs in the investigated field soils and sediments.