The Effect of Sewage Discharge On Water Quality Off the Coast of Alexandria in Spring and Summer

Water samples were taken from 7 transects at El-Anfushy, Eastern Harbour, El-Ebrahymea, Stanly, Gleem, Sidi-Bishr and El-Asafra along the coast off Alexandria. the area lies between latitude 31°10' and 31°20' N and longitude 29°55' and 30° E. Nitrate, nitrite, ammonium, urea, dissolved inorganic phosphate, silicate and pH values were measured with average values 1,13, 0.43, 1.41, 1.21, 1.71, 7.16 μmol l^-1, respectively. the investigated area is considered to be eutrophic. Levels of nutrients measured in 1991 are all significantly higher than those found in the same area in 1976.     

Preparation and investigation of poly(methylmethacrylate) nano-capsules containing haloxyfop-R-methyl and their release behavior

Abstract

In this study, the preparation and characterization of haloxyfop-R-methyl herbicide loaded in poly(methylmethacrylate) (PMMA) nano-capsules by emulsion polymerization and its release behavior were investigated. The chemical characterizations of PMMA/haloxyfop-R-methyl nano-capsules were confirmed by FT-IR spectroscopy method, and the surface morphology was studied by field emission scanning electron microscopy and transmission electron microscopy. Also, the herbicide loading and encapsulation efficiency were analyzed for the herbicide-loaded nano-capsules. The release rate of PMMA/haloxyfop-R-methyl nano-capsules was determined by UV-visible spectroscopy. The thermal properties and thermal stability of nano-capsules were explored by the thermal gravimetric analysis method. The diameter of the nano-capsules was in the range of 100–300?nm. Increasing the amount of herbicide in nano-formulations significantly affected the surface of the nano-capsules and reduced their surface smoothness. Triton-X100 was identified as the best surfactant for the preparation of nano-capsules, and the sample containing the lowest herbicide content showed the best performance in terms of encapsulation and loading efficiency. This sample showed a steady-state release rate during the six days.     

Carbon sequestration via afforestation as a sustainable action to mitigate climate change in Western Iran

Climate change involves increasing atmospheric carbon dioxide concentration which is driven by anthropogenic emissions. Afforestation, which is the establishment of forests on previously non‐forested lands, could be a suitable climate change mitigation strategy. The aim of this research is to evaluate the carbon sequestration capability of the Eucalyptus and Prosopis species in the Reza‐Abad afforestation park in western Iran. For this aim, three stands of any species were selected. For quantitative assessment, a transect was implemented at the length of 100 m. In trees located of transects, the general characteristics of species were measured. Also, for estimating the amount of litter, a sample plot has been measured at the center of the quadrate. These samples were taken from the afforested area, the control area inside the afforested area and another control area outside. In each stand, species were selected randomly and one‐eighth of the whole stand was taken for calculating the percentage of carbon and aerial biomass. Then the aboveground organs were weighted and after the transfer of different plant organs to the laboratory, the conversion factor of carbon sequestration of the plant organs was determined individually by combustion method. Also, soil samples were also collected from two depths of 0–15 and 15–30 cm in each of the cultivated and control parts. The results showed that there is a significant difference between the species and Prosopis has higher carbon sequestration than Eucalyptus. The carbon sequestration among different organs showed a significant difference, carbon sequestration was 19.24 t/ha for Eucalyptus and 18.43 t/ha for Prosopis. After an economic calculation, it was concluded that afforestation has a positive effect on the reduction of atmospheric carbon dioxide. Hence, these results allow decision makers to change land use from desert area to forest, and planting the Prosopis species is more recommendable than Eucalyptus for afforestation in such areas which are economically profitable.     

Modelling the phytoplankton dynamics in a nutrient-rich solar saltern pond: predicting the impact of restoration and climate change

An ecological model for the solar saltern of Sfax (Tunisia) was established and validated by comparing simulation results to observed data relative to horizontal distributions of temperature, nutrients and phytoplankton biomass. Sensitivity analysis was performed in order to assess the influence of the main ecological model parameters. First applied at the saltern’s pond A1, the model was calibrated with field data measured over 4 years of study (from 2000 to 2003), which allowed an evaluation of parameters such as maximum growth rate of phytoplankton, optimal growth temperature and constant of half saturation for P/N assimilation by phytoplankton. Simulation results showed that the model allowed us to predict realistic phytoplankton variations of the study area, though we were unable to accurately reproduce the nutrient variation. The model was then applied to simulations of the impact of changes in phytoplankton biomass through scenarios such as hypothetic climate changes and saltern restoration.     

A development in energy flow/barrier analysis

In this paper, the occupational accidents and their effects on people are modeled. The basis of energy flow/barrier analysis is used to define an accident as the impact of a hazardous agent on a target, as a result of failure of control and protective barriers. This definition is enhanced to include serial and parallel barriers and to distinguish energy barriers from target barriers. The barrier attributes are defined and used to create a quantitative scenario-building model. The probability and severity of various accidents are estimated, by studying barrier reliability and efficiency. This approach is used to develop and simulate accident scenarios and to calculate their consequences. This model can be used in complex systems for analyzing the risk and estimating the importance of barriers.     

A multi-criteria approach to screening alternatives for converting sewage sludge to biodiesel

The search for cheaper feedstock for use in the production of biofuels such as biodiesel has turned attention to various forms of waste products including animal fats, waste oils and now lipids in sludge. With the potential of obtaining sludge at a reduced cost, free, or possibly with incentives, sewage sludge is being investigated as a potential feedstock for biofuel production. For the extraction of oils from the sewage sludge and the subsequent processing, there are various alternatives that should be designed, analyzed, and screened. In developing and screening these alternatives, it is necessary to have a consistent basis for comparing alternatives based on key criteria. While most of the design studies focus on techno-economic criteria, it is also important to include safety metrics in the multi-criteria analysis. In this work, a detailed economic analysis and a safety evaluation are performed on a process involving extraction of triglycerides and fatty acids, pre-treatment of fatty acids (direct conversion to biodiesel), and transesterification of triglycerides to biodiesel. Four solvents, toluene, hexane, methanol and ethanol, are individually used in the extraction process. The resulting triglycerides and fatty acids from each extraction are modeled in the pre-treatment process. ASPEN Plus software is used to simulate the detailed process. Economic analysis is performed using ASPEN ICARUS, and scale-up of a previously analyzed process is used to estimate the cost of the biodiesel portion of the process. A new safety metric (referred to as the Safety Index “SI”) is introduced to enable comparison of the various solvent extraction processes. The SI is based on solvent criteria as well as process conditions. A case study is presented to demonstrate the insights and usefulness of the developed approach. The results of the techno-economic analysis reveal that of the four solvents used for the initial extraction, hexane and toluene were least costly (2.89 and 2.79 $/gal, respectively). Conversely, the safety analysis utilizing the SI reveals that methanol and ethanol are the safer solvent options. The issue of cost/safety tradeoffs is also discussed.     

Determinants of deforestation in Nepal's Central Development Region

The process of deforestation in the Central Development Region (CDR) of Nepal is diverse in space and time, with rapid deforestation still occurring in areas outside the national parks and wildlife reserves. This paper identifies the spatial driving forces (SDFs) of deforestation in the CDR for 1975–2000 using satellite data of 1975 (MSS), 1990 (TM), and 2000 (ETM+) along with socio-demographic and socioeconomic variables. Radiometrically calibrated satellite images are individually classified into seven distinct classes and merged together to cover the entire CDR. Classification accuracies are also assessed. Areas of land use and cover within the areas of each Village Development Committee (VDC) and municipality represented by GIS polygons are calculated from the classified images by overlaying vector files of 1845 polygons representing sections of VDCs and municipalities in 30–1199 m, 1200–2399 m, 2400–4999 m and >5000 m elevation levels. These elevation levels were estimated from the DEM compiled from 24 ASTER scenes taken on different dates. Only the first three elevation levels are used in the analysis because area >5000 m is under permanent snow cover where human related forestry activities are almost negligible. A transition matrix is generated for 1975–1990 using classified images of 1975 and 1990 and then this product is used to further develop another transition matrix for 1990–2000 with the classified ETM+ 2000 images as the final stage. The GIS polygon layer is overlaid on the transition matrices to calculate deforestation areas for 1975–1990 and 1990–2000. Biophysical and socioeconomic information collected from various sources is then brought into a GIS platform for statistical analyses. Six linear regression models are estimated using SAS; in effect, two models for each elevation range representing the 1975–1990 and 1990–2000 periods of change to identify SDF influences on deforestation. These regression analyses reveal that deforestation in the CDR is related to multiple factors, such as farming population, genders of various ages, migration, elevation, road, distance from road to forest, meandering and erosion of river, and most importantly the conversion of forestland into farmland.     

Current levels of airborne polyfluorinated telomers in Japan

Fluorotelomer alcohols (FTOHs), a class of per- and poly-fluorochemicals (PFCs), are environmental contaminants characterized by high volatility and are therefore prone to long-range atmospheric transport. In this study, airborne FTOHs were identified in Japan using a newly developed passive air sampler containing activated carbon felts. Air sampling was conducted at 33 sites all over Japan from April to June 2007. 8:2 FTOH, the dominant analyte, ranged from <32 to 2466pgm(-3) (mean: 241pgm(-3)) followed by 6:2 FTOH from n.d. to 768pgm(-3) (mean: 51.6pgm(-3)), 10:2 FTOH from <17 to 113pgm(-3) (mean: 26.8pgm(-3)) and 8:2 FTOAcryl from n.d. to 480pgm(-3) (mean: 25.8pgm(-3)). 8:2 FTOMethacryl was not detected above detection limit (3pgm(-3)) in all samples. The highest concentration of total investigated PFCs was found in Chiba (35 degrees 43'20' N 140 degrees 39'46' E) (2152-3181pgm(-3)). On the other hand, in three locations of Higashi-Yodogawa (34 degrees 44' N 135 degrees 32' E), high levels of 8:2 FTOAcryl (239pgm(-3), 109-480pgm(-3)) were detected, the levels of which were comparable to those of 8:2 FTOH (mean: 175pgm(-3), range: 115-292pgm(-3)). This study is the first national wide-scale survey of FTOHs and 8:2 FTOAcryl across Japan, showing that 8:2 FTOH was ubiquitous in the environment in Japan.     

Impact of petroleum industry on goats in Saudi Arabia: heavy metal accumulation,oxidative stress,and tissue injury

Environmental Science and Pollution Research - Heavy metals (HMs) constitute a group of persistent toxic pollutants, and the petroleum industry is one of the sources of these metals. This study...     

Health risk assessment of occupational exposure to styrene in Neyshabur electronic industries

Environmental Science and Pollution Research - Styrene is one of the essential components in making thousands of everyday products. Occupational exposure to styrene causes pulmonary, neurological,...