Numerical study of wave–current–vegetation interaction in coastal waters

Research on interactions among wave, current, and vegetation has received increasing attention. An explicit depth-averaged hydrodynamic model coupled with a wave spectral model (CMS-wave) was proposed in this study in order to simulate the wave and wave-induced current in coastal waters. The hydrodynamic model was based on the finite volume method while the intercell flux was computed by employing the Harten–Lax–van Leer approximate Riemann solver to investigate the dry-to-wet interface, and the drag force of vegetation was modeled as the sink terms in the momentum equations. The CMS-wave model was used to investigate the non-breaking and the breaking random waves propagation in vegetation fields. Afterwards, an empirical wave energy dissipation term with plant effect was derived to represent the resistance induced by aquatic vegetation in the wave-action balance equation. The established model was calibrated and validated with both the experimental and field data. The results showed that the wave height decreased significantly along the wave propagation direction in the presence of vegetations. The sensitivity analysis for the plant density, the wave height, and the water depth were performed by comparing the numerical results for the wave height attenuation. In addition, wave and wave-induced current through a finite patch of vegetation in the surf zone were investigated as well. The strong radiation stress gradient could be produced due to the variation of the energy dissipation by vegetation effect in the nearshore zone, which impacted the direction and amplitude of the longshore current. The calculated results showed that the coupling model had good performance in predicting wave propagation and the current over vegetated water regions.     

Flow structure and turbulence characteristics downstream of a spanwise suspended linear array

Laboratory experiments are conducted to quantify the mean flow structure and turbulence properties downstream of a spanwise suspended linear array in a uniform ambient water flow using Particle Tracking Velocimetry. Eighteen experimental scenarios, with four depth ratios (array depth to water column depth) of 0.35, 0.52, 0.78, and 0.95 and bulk Reynolds number (length scale is the array depth) from 11,600 to 68,170, are investigated. Three sub-layers form downstream of the array: (1) an internal wake zone, where the time-averaged velocity decreases with increasing distance downstream, (2) a shear layer which increases in vertical extent with increasing distance downstream of the array, and the rate of the increase is independent of the bulk Reynolds number or the depth ratio, and (3) an external wake layer with enhanced velocity under the array. The location of the shear layer is dependent on the depth ratio. The spatially averaged and normalized TKE of the wake has a short production region, followed by a decay region which is comparable to grid turbulence decay and is dependent on the depth ratio. The results suggest that the shear layer increases the transfer of horizontal momentum into the internal wake zone from the fluid outside of the array and that the turbulence in the internal wake zone can be modeled similarly to that of grid turbulence.     

Comparison of growth and lipid accumulation properties of two oleaginous microalgae under different nutrient conditions

This study compared the growth and lipid accumulation properties of two oleaginous microalgae, namely, Scenedesmus sp. LX1 and Chlorella sp. HQ, under different nutrient conditions. Both algal species obtained the highest biomass, lipid content and lipid yield under low-nutrient conditions （mBGll medium）. The biomass, lipid content and lipid yield of Scenedesmus sp. LX1 were 0.42g·L^-1, 22.5% and 93.8mg·L^-1, respectively. These values were relatively higher than those of Chlorella sp. HQ （0.30g·L^-1, 17.1% and 51.3mg·L^-1, respectively）. These algae were then cultivated in an SE medium that contained more nutrients; as a result, the biomass and lipid yield of Scenedesmus sp. LX1 reduced more significantly than those of Chlorella sp. HQ. Opposite results were observed in lipid and triacylglycerols （TAGs） contents. The cell sizes of both algal species under low-nutrient conditions were larger than those under high-nutrient conditions. Chlorella sp. HQ cells did not aggregate, but Scenedesmus sp. LX1 cells flocculated easily, particularly under low-nutrient conditions. In summary, low-nutrient conditions favour the growth and lipid production of both algae, but Scenedesmus sp. LX1 outperforms Chlorella sp. HQ.     

汶川大地震宏观震中问题的讨论

采用大地震诱发崩塌滑坡特点与地面破坏程度相结合,以及极震区几何中心方法,定性判定了汶川大地震的宏观震中位置。判定结果是汶川大地震应该有2个宏观震中,一是映秀镇牛圈沟为映秀极震区宏观震中,坐标位置:31.045 6°N,103.455 6°E;二是北川老县城为北川极震区宏观震中,坐标位置:31.863 7°N,104.361 0°E。两种判定方法相比,前者更符合山区特殊地质地貌环境下的地震破坏规律。     

典型全氟辛烷磺酸盐(PFOS)替代品对土壤跳虫的生态毒性

利用土壤模式动物白符跳(Folsomia candida),评价4种PFOS替代产品,包括50%的全氟丁基有机铵盐阳离子表面活性剂(简称表面活性剂)、用调聚法合成的三防织物整理剂(含固率23.7%,简称织物三防整理剂)、用电解氟化法合成的C4织物及C6织物三防整理剂的生态毒性,目的是为筛选安全高效的PFOS替代品提供科学依据。研究表明,表面活性剂与三防织物整理剂对跳虫急性毒性的LC50(7d)分别为4959和1007mg·kg-1,而C4与C6整理剂对跳虫急性毒性的LC50(7d)均大于5000mg·kg-1;表面活性剂、织物三防整理剂与C4整理剂对跳虫慢性毒性的EC50(28d)分别为0.15、0.12和0.18mg·kg-1,而C6织物三防整理剂对跳虫慢性毒性的EC50(28d)大于1mg·kg-1;4种替代品生态毒性顺序为织物三防整理剂>表面活性剂>C4>C6织物三防整理剂。通过与本实验室PFOS生态毒性的研究结果比较发现,除织物三防整理剂,其余3种替代品对跳虫的生态毒性作用均小于PFOS,其中C6整理剂对跳虫的毒性最小,有望成为替代PFOS的环保型织物整理剂。     

纳米氧化铝对斑马鱼幼鱼早期运动行为的影响

随着纳米技术的迅猛发展,纳米材料的安全性研究具有十分重要的意义。为探讨纳米氧化铝对斑马鱼幼鱼早期运动行为的影响,本研究将受精后6 h(6 hpf)的斑马鱼胚胎随机分成空白对照组(E3培养液)、纳米氧化铝组(12.5、25、50、100μg·mL~(-1))。采用6孔板染毒,每组160颗卵,共8个孔,每孔20颗卵/10 m L试液,染毒液更新周期为1 d。观察急性毒性和运动行为。结果显示,各纳米氧化铝组无明显的急性毒性;运动行为检测发现,25、50、100μg·m L~(-1)纳米氧化铝组受精后6 d幼鱼(6dpf)黑暗状态下的运动速度、运动距离、趋触性程度较空白对照组均显著下降(P0.05);在6 dpf幼鱼对强光刺激的惊恐逃避反射试验中发现,各组幼鱼在光照1 min内运动速度较光照前的黑暗期均明显下降(P0.05),但25μg·mL~(-1)和100μg·mL~(-1)浓度组在光照时速度下降得更慢(P0.05);关闭光源后,各组幼鱼的运动速度都会上升,但25μg·mL~(-1)和100μg·mL~(-1)浓度组在打开光源后速度上升得更慢(P0.05)。上述结果表明,纳米氧化铝可以影响斑马鱼幼鱼早期的运动行为。     

安阳市冬季观测期间PM2.5污染特征及来源解析

为探究安阳市冬季PM_(2.5)的污染特征及来源,于2019年11月19—26日在安阳市3个站点(柏庄镇政府、红庙街小学、安阳师专)采集PM_(2.5)样品,并对PM_(2.5)质量浓度和无机元素、水溶性离子进行测定,利用正定矩阵因子模型(PMF)并结合大气污染源排放清单进行源解析。结果表明:观测期间安阳市的PM_(2.5)平均质量浓度为104.09μg/m~3,水溶性离子平均质量浓度为48.9μg/m~3,占PM_(2.5)质量浓度的46.9%。PMF解析结果为二次源58.9%、燃煤源15.7%、机动车排放源9.2%、扬尘源8.6%、工业源2.5%、其他源5.1%。结合2018年安阳市大气污染源排放清单对二次源贡献进行重新分配,得到安阳市PM_(2.5)主要贡献来自燃煤源29.8%、工业源28.5%、机动车源27.1%。后向轨迹聚类结果显示,安阳市气团输送路径主要有远距离传输、城市间输送和本地运输3类,其中本地运输占比最大,其次为正南和东南方向上的城市间输送。     

Comparison of membrane fouling in ultrafiltration of down-flow and up-flow biological activated carbon effluents

The UF membrane fouling by down- and up-flow BAC effluents were compared. Up-flow BAC effluent fouled the membrane faster than down-flow BAC effluent. The combined effects dominated irreversible fouling. The extent of fouling exacerbated by inorganic particles was higher. The TMP, permeate flux, and normalized membrane flux during 21 days of UF of DBAC and UBAC effluents. Fouling during ultrafiltration of down- and up-flow biological activated carbon effluents was investigated to determine the roles of polysaccharides, proteins, and inorganic particles in ultrafiltration membrane fouling. During ultrafiltration of down- flow biological activated carbon effluent, the trans-membrane pressure was≤26 kPa and the permeate flux was steady at 46.7 L?m⁻²?h⁻¹. However, during ultrafiltration of up-flow biological activated carbon effluent, the highest trans-membrane pressure was almost 40 kPa and the permeate flux continuously decreased to 30 L?m⁻²?h⁻¹. At the end of the filtration period, the normalized membrane fluxes were 0.88 and 0.62 for down- and up-flow biological activated carbon effluents, respectively. The membrane removed the turbidity and polysaccharides content by 47.4% and 30.2% in down- flow biological activated effluent and 82.5% and 22.4% in up-flow biological activated carbon effluent, respectively, but retained few proteins. The retention of polysaccharides was higher on the membrane that filtered the down- flow biological activated effluent compared with that on the membrane that filtered the up-flow biological activated carbon effluent. The polysaccharides on the membranes fouled by up-flow biological activated carbon and down- flow biological activated effluents were spread continuously and clustered, respectively. These demonstrated that the up-flow biological activated carbon effluent fouled the membrane faster. Membrane fouling was associated with a portion of the polysaccharides (not the proteins) and inorganic particles in the feed water. When there was little difference in the polysaccharide concentrations between the feed waters, the fouling extent was exacerbated more by inorganic particles than by polysaccharides.     

钙基CO_2吸收剂循环特性影响因素分析

利用小型固定床反应器研究了循环煅烧/碳酸化过程中,煅烧温度、煅烧气氛、碳酸化温度、压力等对钙基CO2吸收剂循环特性的影响,确定了影响钙基CO2吸收剂循环特性的主要因素。结果表明:随循环次数的增加,吸收剂的转化率明显下降,循环10次后,其基本都下降到20%左右;煅烧温度是影响吸收剂循环特性最重要的因素;煅烧气氛中存在CO2对吸收剂活性保持不利;吸收压力和温度也对吸收剂的循环特性有一定影响,较高的吸收压力和吸收温度有利于吸收剂转化。