Inventory of Ocean Monitoring in the Southern California Bight

Monitoring of the ocean environment in southern California, USA, has been conducted by a diverse array of public and private organizations with different motivations, working on a variety of spatial and temporal scales. To create a basis from which to integrate information from these diverse programs, we conducted an inventory of ocean monitoring activities in the Southern California Bight to address the following questions: (1) How much money is being expended annually on marine monitoring programs? (2) Which organizations are conducting the most monitoring? (3) How are resources allocated among the different types of monitoring programs? This inventory focused on programs existing, or those expected to be in existence, for at least 10 years and that were active at any time between 1994 and 1997. For each program identified for inclusion in this study, information was collected on the number of sites, sampling intensity, parameters measured, and methods used. Levels of effort were translated into cost estimates based upon a market survey of local consulting firms. One hundred fourteen marine monitoring programs, conducted by 65 organizations and costing US $31 million annually, were identified. Most of the effort (81 programs, 65% of samples, 70% of costs) was expended by ocean dischargers as part of their compliance with National Pollutant Discharge Elimination System (NPDES) permit requirements. Federal programs (11 programs, 25% of samples, 10% of total expenditures) expended more than state or local government programs. More than one quarter of monitoring expenditures were conducted to measure concentrations and mass of effluent inputs to the ocean. The largest effort expended on receiving water monitoring was for measuring bacteria, followed by sediments, fish/shellfish, water quality, and intertidal habitats. The large level of expenditures by individual agencies has presented opportunities for integrating small, site-specific ocean monitoring programs into regional- and national-scale monitoring and assessment programs.     

Cougar Dispersal Patterns, Metapopulation Dynamics, and Conservation

Abstract: We examined cougar (   Puma concolor ) dispersal, emigration, and immigration in the San Andres Mountains, New Mexico, from 1985 to 1995 to quantify the effects of dispersal on the local population and surrounding subpopulations. We captured, tagged, and radio-collared animals to detect the arrival of new immigrants and dispersal characteristics of progeny. We found that cougars in southern New Mexico exhibited a metapopulation structure in which cougar subpopulations were separated by expanses of noncougar habitat and linked by dispersers. Of 43 progeny (n = 20 males , 23 females ) studied after independence, only 13 females exhibited philopatric behavior. Males dispersed significantly farther than females, were more likely to traverse large expanses of noncougar habitat, and were probably most responsible for nuclear gene flow between habitat patches. We estimated that an average of 8.5 progeny (i.e., cougars born in the study area) successfully emigrated from and 4.3 cougars successfully immigrated to the San Andres Mountains each year. Concurrently, an average of 4.1 progeny were recruited into the San Andres cougar population. Protected cougar subpopulations can contribute to metapopulation persistence by supplying immigrants to surrounding subpopulations that are affected by fragmentation or offtake by humans. Cougar population dynamics and dispersal behavior dictate that cougar management and conservation should be considered on a regional scale.     

Fir decline and mortality in the southern Siberian Mountains

Regional Environmental Change - Increased dieback and mortality of “dark needle conifer” (DNC) stands (composed of fir (Abies sibirica), Siberian pine (Pinus sibirica) and spruce (Picea...     

An Assessment of the Significance of Mercury Release from Coal Fly Ash

Abstract

Some mercury (Hg) naturally present in coal is retained in the fly ash remaining after combustion. Concern has been raised regarding the potential for release of this Hg to the environment. The exchange of Hg between fly ash and the atmosphere was measured in the laboratory and in situ at a fly ash landfill. All samples of fly ash used in the laboratory study, with the exception of that derived from lignite-type coal, acted as a sink for atmospheric Hg. Deposition rates were found to increase as air Hg concentrations increased and to decrease with incident light and increased temperature. Addition of water to fly ash samples resulted in re-emission of deposited atmospheric Hg. Deposition was the dominant flux measured in situ at a fly ash landfill. Atmospheric Hg was deposited to all samples collected as part of two demonstration projects using carbon injection for enhanced Hg capture. Hg concentrations of extracts derived using U.S. Environmental Protection Agency Method 1312 (Synthetic Precipitation Leaching Procedure) were ≤14.4 ng/L. Data developed demonstrate that fly ash, including that collected from Hg removal projects, will release little Hg to the air or water, and under certain conditions, absorbs Hg from the air.     

Interaction of ocean acidification and temperature; the high cost of survival in the brittlestar Ophiura ophiura

This study has demonstrated an interaction between the effect of increased ocean acidity and temperature (40 days exposure) on a number of key physiological parameters in the ophiuroid brittlestar, Ophiura ophiura. Metabolic upregulation is seen in the low pH treatments when combined with low temperature. However, this is far outweighed by the response to elevated temperature (+4.5°C). In the high temperature/low pH treatments treatments (where calcite is undersaturated) there appears to be an energetic trade-off likely in order to maintain net calcification where dissolution of calcium carbonate may occur. This energy deficit results in a ~30% reduction in the rate of arm regeneration at pH 7.3 which is predicted to be reached by the year 2300. This understanding of how O. ophiura responds to ocean acidification, taking into account an interactive effect of temperature, suggests that fitness and survival may indirectly be reduced through slower recovery from arm damage.     

Nutrient dynamics and tree growth of silvopastoral systems: impact of poultry litter

Fertilizing pastures with poultry litter has led to an increased incidence of nutrient-saturated soils, particularly on highly fertilized, well drained soils. Applying litter to silvopastures, in which loblolly pine (Pinus taeda L.) and bahiagrass (Paspalum notatum) production are integrated, may be an ecologically desirable alternative for upland soils of the southeastern USA. Integrating subterranean clover (Trifolium subterraneum) into silvopastures may enhance nutrient retention potential. This study evaluated soil nutrient dynamics, loblolly pine nutrient composition, and loblolly pine growth of an annually fertilized silvopasture on a well drained soil in response to fertilizer type, litter application rate, and subterranean clover. Three fertilizer treatments were applied annually for 4 yr: (i) 5 Mg litter ha(-1) (5LIT), (ii) 10 Mg litter ha(-1) (10LIT), and (iii) an inorganic N, P, K pasture blend (INO). Litter stimulated loblolly pine growth, and neither litter treatment produced soil test P concentrations above runoff potential threshold ranges. However, both litter treatments led to accumulation of several nutrients (notably P) in upper soil horizons relative to INO and unfertilized control treatments. The 10LIT treatment may have increased N and P leaching potential. Subterranean clover kept more P sequestered in the upper soil horizon and conferred some growth benefits to loblolly pine. Thus, although these silvopasture systems had a relatively high capacity for nutrient use and retention at this site, litter should be applied less frequently than in this study to reduce environmental risks.     

Environmental Technology Verification (ETV) test of dioxin emission monitors

The performance of four dioxin emission monitors, including two long-term sampling devices, the Dioxin-MonitoringSystem (DMS) and AMESA (the adsorption method for sampling dioxins and furans), and two semireal-time continuous monitors, the resonance ionization with multimirror photon accumulation time-of-flight mass spectrometer (RIMMPA-TOFMS) and the jet resonance-enhanced multiphoton ionization (jet-REMPI) system were tested. A package boiler burning a simulated chlorinated hazardous waste was used for a total of nine tests. Reference samples were collected during each test and analyzed for polychlorinated dibenzodioxins and dibenzofurans (PCDDs/Fs) using gas chromatography mass spectrometry. The PCDD/F concentrations of the reference samples measured by EPA Method 23 ranged from 0.9 to 6.0 ng toxic equivalence (TEQ)/dry standard cubic meter. The relative accuracies achieved by DMS, AMESA, and jet-REMPI varied from 22.6% to 78.2%, with 100% data completeness. The RIMMPA-TOFMS produced no quantifiable results due to various difficulties associated with the instrument during the testing. The two long-term samplers were easy to install and operate and provided a cumulative, averaged emission for the sampling period. The operations of the two semi-real-time continuous monitors were relatively complex, but one of them provided on-site, real-time data for PCDD/F emissions from measurement of a TEQ correlative indicator compound. This article summarizes results from the individual Environmental Technology Verification reports for the four dioxin monitors. This work was presented, in part, at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

Performance of an aerodynamic particle separator

This compact, high-flow device aerodynamically separates small particles from a gas stream by a series of annular truncated airfoils. The operating concept, design and performance of this novel particle separator are described. Tests results using corn starch and post-cyclone coal fly ash are presented. Particle collection efficiencies of 90% for corn starch and 70% for coal fly ash were measured at inlet velocities of 80 ft s⁻¹ (2700 cfm) and (6 inches) water pressure drop with particle loading up to 4 gr ft⁻³ in air at standard conditions. Results from computer modeling using FLUENT are presented and compared to the tests. The aerodynamic particle separator is an attractive alternative to a cyclone collector.