Adjusting sowing date and cultivar shift improve maize adaption to climate change in China

Mitigation and Adaptation Strategies for Global Change - This study investigates the impact of climate change on spring and summer maize (Zea mays) yield and evaluates several adaptation measures...     

Optimal range of plug-in electric vehicles in Beijing and Shanghai

Both China’s national subsidy policies for plug-in electric vehicles (PEVs) purchasers and passenger cars corporate average fuel consumption and new vehicle credit regulation (dual-credit policy) favor long-range 300+ km battery electric vehicles (BEVs) and 80+ km plug-in hybrid electric vehicles (PHEVs). However, these electric vehicles tend to have lower energy efficiency and higher purchase and operation costs. Vehicle with larger batteries can also be less equitable because the subsidies are often provided to more expensive vehicles and wealthier owners. This study takes advantage of a novel dataset of daily driving data from 39,854 conventional gasoline vehicles in Beijing and 4999 PHEVs in Shanghai to determine the optimal range of BEVs and PHEVs within their respective cities. We simulate a model to explore ranges with which PEVs emit less GHGs than that of a baseline hybrid and conventional gasoline vehicle while ensuring that all daily travel demands are met. Our findings indicate that in both cities, the optimal ranges to balance cost and travel demand for BEVs are 350 km or less and for PHEVs are 60 km or less in Beijing and 80 km or less in Shanghai. We also find that to minimize carbon dioxide (CO₂) emissions, the ranges are even lower 10 km in Beijing and 30 km in Shanghai. Our study suggests that instead of encouraging long-range PEVs, governments should subsidize PEV models with shorter ranges. Parallel efforts should also be made to both increase renewable energy over fossil fuels and expand charging facilities. Although individual mobility demand varies, the government could reduce occasional long-distance driving by subsidizing alternative transportation choices. Providing week-long driving trials to consumers before their purchases may help decrease the demand of very long range PEVs by alleviating the range anxiety through a learning process.

     

淮河干流及主要支流夏季浮游植物群落生物多样性评价

浮游植物是水生态系统的重要组成部分,其群落变化与水体环境条件密切相关,是反映河流健康的主要生物指标.为揭示淮河流域浮游植物群落特征及其与水质的相互关系,于2015年夏季对淮河流域典型水体—淮河干流、沙颍河、涡河和淠河进行系统的水质及浮游植物调查,探明浮游植物群落及其空间分布特征,并结合水体理化指标和生物指数进行水质评价.结果表明,淮河干流及主要支流27个点位中共获得浮游植物8门71属153种,主要隶属于绿藻门(Chlorophyta)、硅藻门(Bacillariophyta)、蓝藻门(Cyanophyta).浮游植物密度为0.019×10~5~131.824×10~5ind·L~(-1),不同河段浮游植物分布表现出较为显著的空间差异性,平均密度大小呈现沙颖河淮河干流涡河淠河的特点.非参数多维尺度分析(Non-metric Multidimensional Scaling,NMDS)表明,淮河干流、淠河和涡河的浮游植物群落组成和结构的相似性较高,而与沙颍河的浮游植物群落存在一定的差异.Shannon多样性指数H'介于0.78~3.21之间,Margalef丰富度指数D介于1.03~4.79之间,Pielou均匀度指数J介于0.12~0.73之间.水质生物评价结果显示,淮河流域大部分水体处于中等污染状况,部分点位处于重污染状况,其结果与水质综合污染指数评价结果具有较好的一致性.研究结果可为淮河水污染防治和水生态修复提供基础依据.     

MgO低温催化臭氧降解氨氮的机制研究

研究了低温条件下单独臭氧及MgO催化臭氧化降解水中氨氮的效率和特征,并对其反应机制分别进行了探讨.结果表明,pH是影响臭氧和催化臭氧化除氨的重要因素,不仅影响溶液中NH_3与NH~+_4的比例和臭氧氧化氨氮的速率,还影响氧化产物种类,从而影响脱氮效果.10℃时,单独臭氧对水中氨氮的氧化降解效率随pH的升高而增大,pH≤9时整体降解效率不高,pH=9时仅为16.39%,而pH=10时达到41.77%.臭氧和·OH共同参与降解氨氮的过程.单独臭氧氧化氨氮生成氮气的选择性具有pH依赖性,并与Cl~-密切相关.pH低(≤9)时,氨氮多以NH~+_4形态存在,O_3与Cl~-反应生成ClO~-_x(x=1、3),再氧化NH~+_4,从而生成气态产物N_2或N_2O.MgO在低温条件下具有很强的催化臭氧化降解氨氮的能力且温度升高有利于反应的进行,0、10、20℃时,MgO催化臭氧化氨氮的效率分别为77.53%、80.17%、91.26%.此过程中,·OH参与反应的程度低,一部分氨氮降解依靠ClO~-_x氧化NH~+_4,而氨氮降解的主要途径为O_3对NH_3的直接氧化.     

气候变化和人类活动对武江流域年径流及最大日流量影响的定量分析

针对气候变化与人类活动对流域年径流及最大日流量变化影响的定量识别问题,以华南湿润区武江流域为例,分别采用HIMS（Hydro-Informatic Modeling System）模型和敏感性系数法,从日和年尺度定量模拟和评估气候变化与人类活动对流域年最大日流量和径流变化的影响过程及贡献率。结果表明：HIMS模型在武江流域适用性良好,日尺度模型率定期和验证期的纳西效率系数分别为0.85和0.77,水量平衡误差绝对值分别为3.1%和3.3%;两种方法均表明气候变化是引起流域年径流量增加的主要因素,人类活动导致了流域径流量的减少,但贡献率较小。气候变化与人类活动导致了流域年最大日流量的增加,气候变化对年最大日流量增加的贡献率为94%,而人类活动的贡献率则为6%。相较于年均径流量,气候变化对年最大日流量的影响更为显著。     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

Mercury flows in large-scale gold production and implications for Hg pollution control

Large-scale gold production(LSGP) is one of the five convention-related atmospheric mercury(Hg) emission sources in the Minamata Convention on Mercury. However, field experiments on Hg flows of the whole process of LSGP are limited. To identify the atmospheric Hg emission points and understand Hg emission characteristics of LSGP, Hg flows in two gold smelters were studied. Overall atmospheric Hg emissions accounted for 10%–17% of total Hg outputs and the Hg emission factors for all processes were 7.6–9.6 kg/ton. There were three dominant atmospheric Hg emission points in the studied gold smelters, including the exhaust gas of the roasting process, exhaust gas from the environmental fog collection stack and exhaust gas from the converter of the refining process. Atmospheric Hg emissions from the roasting process only accounted for 16%–29% of total emissions and the rest were emitted from the refining process. The overall Hg speciation profile(gaseous elemental Hg/gaseous oxidized Hg/particulate-bound Hg) for LSGP was 34.1/57.1/8.8. The dominant Hg output byproducts included waste acid, sulfuric acid and cyanide leaching residue. Total Hg outputs from these three byproducts were 80% in smelter A and 84% in smelter B. Our study indicated that previous atmospheric Hg emissions from large-scale gold production might have been overestimated.Hg emission control in LSGP is not especially urgent in China compared to other significant emission sources(e.g., cement plants). Instead, LSGP is a potential Hg release source due to the high Hg output proportions to acid and sludge.     

Effects of Na+ on Cu/SAPO-34 for ammonia selective catalytic reduction

Copper-exchanged chabazite (Cu/CHA) catalysts have been found to be affected by alkali metal and alkaline earth ions. However, the effects of Na⁺ ions on Cu/SAPO-34 for ammonia selective catalytic reduction (NH₃-SCR) are still unclear. In order to investigate the mechanism, five samples with various Na contents were synthesized and characterized. It was observed that the introduced Na⁺ ion-exchanges with H⁺ and Cu^2 + of Cu/SAPO-34. The exchange of H⁺ is easier than that of isolated Cu^2 +. The exchanged Cu^2 + ions aggregate and form “CuAl₂O₄-like” species. The NH₃-SCR activity of Cu/SAPO-34 decreases with increasing Na content, and the loss of isolated Cu^2 + and acid sites is responsible for the activity loss.