A new approach to predicting the maximum temperature in dry drilling based on a finite element model

A new analysis approach is developed to predict the temperature in dry drilling. The working rake angle and the working relief angle which the effect of feed is considered at an arbitrary point in the leading cutting edge of a twist drill are developed for the equivalent model. Then finite element models are developed to predict the drilling temperature based on the equivalent model. Commercial finite element codes Abaqus, Deform 2D and Third Wave Systems AdvantEdge have been used. In simulations, different chip separation models and material models are applied in the three codes. And the effect of the laws of drilling velocities and feed rates on the temperature are investigated by the finite element method. Predicted results of the maximum temperatures by three codes are compared with experiments, respectively. Results indicate that the drilling temperature results of simulations have good agreement to the experimental ones, and the errors are all less than 15%.     

雨水管道沉积物对径流初期冲刷的影响

为了避免汇水面源头以及分流制雨水管道系统中沉积的大量污染物在降雨时随雨水径流被冲刷进入水体,从而控制径流对水环境构成的冲击性污染,从理论和试验2方面分析了管道径流污染物(汇水面和管道沉积物2个来源)的流失规律.结果表明,汇水面源头污染物流失较符合源头冲刷的指数衰减模型,管道内沉积物流失可用流量曲线模型计算;管道内沉积物占管道径流污染物的比例越大,管道径流的初期冲刷现象越不明显.为了提高径流污染控制设施的效率,宜在源头进行分散控制,并加强雨水管网系统清洁维护,避免污染物的积累.     

Efficient Delineation of Nested Depression Hierarchy in Digital Elevation Models for Hydrological Analysis Using Level‐Set Method

In terrain analysis and hydrological modeling, surface depressions (or sinks) in a digital elevation model (DEM) are commonly treated as artifacts and thus filled and removed to create a depressionless DEM. Various algorithms have been developed to identify and fill depressions in DEMs during the past decades. However, few studies have attempted to delineate and quantify the nested hierarchy of actual depressions, which can provide crucial information for characterizing surface hydrologic connectivity and simulating the fill‐merge‐spill hydrological process. In this paper, we present an innovative and efficient algorithm for delineating and quantifying nested depressions in DEMs using the level‐set method based on graph theory. The proposed level‐set method emulates water level decreasing from the spill point along the depression boundary to the lowest point at the bottom of a depression. By tracing the dynamic topological changes (i.e., depression splitting/merging) within a compound depression, the level‐set method can construct topological graphs and derive geometric properties of the nested depressions. The experimental results of two fine‐resolution Light Detection and Ranging‐derived DEMs show that the raster‐based level‐set algorithm is much more efficient (~150 times faster) than the vector‐based contour tree method. The proposed level‐set algorithm has great potential for being applied to large‐scale ecohydrological analysis and watershed modeling.     

Motorcycle safety among motorcycle taxi drivers and nonoccupational motorcyclists in developing countries: A case study of Maoming,South China

Objective: An increasing number of motorcycle taxis have been involved in traffic crashes in many developing countries. This study examines the characteristics of both motorcycle taxi drivers and nonoccupational motorcyclists, investigates the risks they pose to road safety, and provides recommendations to minimize their risks.

Methods: Based on the data collected from a questionnaire survey of 867 motorcycle taxi drivers and 2,029 nonoccupational motorcyclists in Maoming, South China, comparisons were made to analyze differences of personal attributes, attitudes toward road safety, and self-reported behavior of the 2 groups.

Results: Results of the chi-square tests show that not only motorcycle taxi drivers but also nonoccupational motorcyclists in Maoming held poor attitudes toward road safety and both groups reported unsafe driving behavior. There is much room for improving local road safety education among all motorcyclists in Maoming. Yet, motorcycle taxi drivers were more likely to pose road safety risks than nonoccupational motorcyclists under some circumstances, such as speeding late at night or early in the morning, not requiring passengers to wear helmets, and running a red light. The results of the binary logistic regression model show that possessing a vehicle license for a motorcycle or not was the common significant predictor for unsafe driving behavior of motorcycle taxi drivers and nonoccupational motorcyclists. Therefore, enforcement against all motorcyclists not showing vehicle licenses for their motorcycles should be stepped up.

Conclusion: Motorcycle safety is largely poor in Maoming. Therefore, efforts to improve motorcycle safety should be strengthened by targeting not only motorcycle taxi drivers but also nonoccupational motorcyclists.     

宜兴市土地利用类型与水生态健康相关性研究

利用宜兴市2012年-2014年土地利用数据、水生态健康等相关数据,引用土地利用动态度和土地利用综合程度指数,对土地利用变化和水生态健康现状进行分析,运用相关性分析法测算土地利用类型比例与水生态健康主要指标的相关性.结果表明:耕地、建设用地比例与水生态健康综合指标负相关,湿地、草地、园地、林地用地比例与水生态健康综合指标正相关;建设用地比例与底栖动物负相关;湿地用地比例与营养、底栖动物指标正相关较强.     

滨海石化项目环境综合风险评估方法研究

研究针对国内目前的研究现状,运用环境风险评价指数法建立滨海石化项目环境风险评估体系,采用层次分析法和熵权法结合的组合赋权法,结合专家咨询法进行指标的修改与完善,运用线性加权组合法对评估体系中指标权重的赋值,并计算滨海石化项目的环境风险等级,确定项目的风险强弱.实例分析表明环境风险管理在环境风险的产生和预防占有十分重要的地位,通过加强和完善环境风险的管理体系,结合环境因素的敏感程度及风险源的产生和影响,能降低环境风险及事故的影响程度.     

卫星遥感技术在空气点位布设评估工作中的应用研究

以苏州市为例,利用2013-2014年MODIS高分辨率大气气溶胶卫星遥感产品对国控空气监测点位布设调整方案进行评估论证,通过提取2 km和5km半径范围的PM2.5遥感观测数据,与现有国控布设点位的地面监测数据进行相关性分析后,确定卫星产品用于评估验证是可靠的;通过不同天气场下PM2.5月均值浓度分布的比较,表明调整后空气点位布设具有很好的代表性.     

微波协同氧化预处理垃圾渗滤液NF膜滤浓缩液研究

针对城市生活垃圾填埋场垃圾渗滤液NF膜处理后产生的浓缩液处理难问题,采用微波协同氧化技术对其进行预处理,探讨了pH值、预反应时间、药剂用量、微波反应时间等因素对浓缩液CODcr及色度去除率的影响.结果表明:当pH=4,预反应时间60 min,药剂用量1g/l、微波反应时间3 min时,CODcr、色度的去除率分别为71.2%,80%.预处理后的出水CODcr及色度指标达到垃圾渗滤液现有生化处理系统的进水要求.     

Volatile organic compound emissions from straw-amended agricultural soils and their relations to bacterial communities: A laboratory study

A laboratory study was conducted to investigate volatile organic compound(VOC) emissions from agricultural soil amended with wheat straw and their associations with bacterial communities for a period of 66 days under non-flooded and flooded conditions. The results indicated that ethene, propene, ethanol, i-propanol, 2-butanol, acetaldehyde, acetone,2-butanone, 2-pentanone and acetophenone were the 10 most abundant VOCs, making up over 90% of the total VOCs released under the two water conditions. The mean emission of total VOCs from the amended soils under the non-flooded condition(5924 ng C/(kg·hr)) was significantly higher than that under the flooded condition(2211 ng C/(kg·hr)). One "peak emission window" appeared at days 0–44 or 4–44, and over 95% of the VOC emissions occurred during the first month under the two water conditions. Bacterial community analysis using denaturing gradient gel electrophoresis(DGGE) showed that a relative increase of Actinobacteria, Bacteroidetes, Firmicutes and γ-Proteobacteria but a relative decrease of Acidobacteria with time were observed after straw amendments under the two water conditions. Cluster analysis revealed that the soil bacterial communities changed greatly with incubation time, which was in line with the variation of the VOC emissions over the experimental period. Most of the above top 10 VOCs correlated positively with the predominant bacterial species of Bacteroidetes, Firmicutes and Verrucomicrobia but correlated negatively with the dominant bacterial species of Actinobacteria under the two water conditions. These results suggested that bacterial communities might play an important role in VOC emissions from straw-amended agricultural soils.     

Advanced treatment of wet-spun acrylic fiber manufacturing wastewater using three-dimensional electrochemical oxidation

A three-dimensional electrochemical oxidation(3D-EC) reactor with introduction of activated carbon(AC) as particle micro-electrodes was applied for the advanced treatment of secondary wastewater effluent of a wet-spun acrylic fiber manufacturing plant. Under the optimized conditions(current density of 500 A/m~2, circulation rate of 5 mL/min, AC dosage of 50 g, and chloride concentration of 1.0 g/L), the average removal efficiencies of chemical oxygen demand(COD_(cr)), NH3–N, total organic carbon(TOC), and ultraviolet absorption at 254 nm(UV_(254)) of the 3D-EC reactor were 64.5%, 60.8%, 46.4%, and 64.8%, respectively; while the corresponding effluent concentrations of COD_(cr), NH_3–N, TOC, and UV_(254) were 76.6, 20.1, and42.5 mg/L, and 0.08 Abs/cm, respectively. The effluent concentration of COD_(cr) was less than 100 mg/L, which showed that the treated wastewater satisfied the demand of the integrated wastewater discharge standard(GB 8978-1996). The 3D-EC process remarkably improved the treatment efficiencies with synergistic effects for COD_(cr), NH_3–N, TOC, and UV_(254) during the stable stage of 44.5%, 38.8%, 27.2%, and 10.9%, respectively, as compared with the sum of the efficiencies of a two-dimensional electrochemical oxidation(2D-EC) reactor and an AC adsorption process, which was ascribed to the numerous micro-electrodes of AC in the 3D-EC reactor. Gas chromatography mass spectrometry(GC–MS) analysis revealed that electrochemical treatment did not generate more toxic organics, and it was proved that the increase in acute biotoxicity was caused primarily by the production of free chlorine.