Application of fire suppression materials on suppression of LNG pool fires

An LNG pool fire is considered one of the main hazards of LNG, together with LNG vapor dispersion. Suppression methods are designed to reduce the hazard exclusion zones, distance to reach radiant heat of 5 kW/m², when an LNG pool fire is considered. For LNG vapor dispersion, the hazard exclusion zone is the distance travelled by the LNG vapor to reach a concentration of 2.5% v/v (half of the LNG lower flammability limit).Warming the LNG vapor to reach positive buoyancy faster is one way to suppress LNG vapor dispersion and reduce evaporation rate (thus fire size and its associated radiant heat) and that is the main objective in LNG pool fire suppression. Based on previous research, the use of high expansion foam has been regarded as the primary method in suppressing LNG pool fires. However, in 1980, another method was introduced as an alternative pool fire suppression system, Foamglas^®. The research concluded that 90% of the radiant heat was successfully reduced. Currently-called Foamglas^® pool fire suppression (Foamglas^® PFS) is a passive mitigation system and is deployed after the leak occurs. Foamglas^® PFS is non-flammable, and has a density one-third of the density of LNG, thus floats when an LNG pool is formed.This paper describes the study and confirmation of Foamglas^®PFS effectiveness in suppressing LNG pool fires. In addition, while Foamglas^® PFS is not expected to suppress LNG vapor dispersion, further investigation was conducted to study the effect of Foamglas^®PFS on LNG vapor dispersion. An LNG field experiment was conducted at Brayton Fire Field. The experimental development, procedures, results and findings are detailed in this paper.     

Feasibility of bioleaching integrated with a chemical oxidation process for improved leaching of valuable metals from refinery spent hydroprocessing catalyst

Bioleaching is considered an eco-friendly technique for leaching metals from spent hydroprocessing catalysts; however, the low bioleaching yield of some valuable metals (Mo and V) is a severe bottleneck to its successful implementation. The present study reported the potential of an integrated bioleaching-chemical oxidation process in improved leaching of valuable metals (Mo and V) from refinery spent hydroprocessing catalysts. The first stage bioleaching of a spent catalyst (coked/decoked) was conducted using sulfur-oxidizing microbes. The results suggested that after 72 h of bioleaching, 85.7% Ni, 86.9% V, and 72.1% Mo were leached out from the coked spent catalyst. Bioleaching yield in decoked spent catalyst was relatively lower (86.8% Ni, 79.8% V, and 59.8% Mo). The low bioleaching yield in the decoked spent catalyst was attributed to metals’ presence in stable fractions (residual + oxidizable). After first stage bioleaching, the integration of a second stage chemical oxidation process (1 M H₂O₂) drastically improved the leaching of Ni, Mo, and V (94.2–100%) from the coked spent catalyst. The improvement was attributed to the high redox potential (1.77 V) of the H₂O₂, which led to the transformation of low-valence metal sulfides into high-valence metallic ions more conducive to acidic bioleaching. In the decoked spent catalyst, the increment in the leaching yield after second stage chemical oxidation was marginal (<5%). The results suggested that the integrated bioleaching-chemical oxidation process is an effective method for the complete leaching of valuable metals from the coked spent catalyst.

     

Characterizing dietary variability and trophic positions of coastal calanoid copepods: insight from stable isotopes and fatty acids

The spring zooplankton community in the Strait of Georgia (British Columbia, Canada) is characterized by the presence of several calanoid copepod species which collectively make up ~90% of the mezozooplankton biomass. Here, we investigate interspecific, interannual, and geographic variability in the diets and trophic positions of these copepods using a combination of fatty acids and stable isotopes. To characterize geographic variability in diet, we compare our findings from the Strait of Georgia with similar data from Ocean Station P in the subarctic northeast Pacific. Both fatty acid and stable isotope signatures indicate the existence of three trophic levels, even within the limited size range of these copepods: Neocalanus plumchrus and Calanus marshallae are primarily omnivorous, while Euchaeta elongata is carnivorous and Eucalanus bungii is herbivorous. Fatty acid markers of trophic position (e.g., DHA/EPA, 18:1n-9/18:1n-7) correlate significantly with δ¹⁵N, while markers indicating the proportion of diatoms to flagellates in the diet (e.g., 16PUFA/18PUFA and DHA/EPA) correlate significantly with δ¹³C, after the effect of lipid concentration on δ¹³C is accounted for. Despite the general correlation between stable isotopes and fatty acids, the former are not sensitive enough to capture the range of interannual variability observed in the latter, and can only capture substantial shifts in the diet over geographic scales. However, regardless of variability in food quality, the relative trophic positions of these copepods do not change significantly either spatially or temporally.     

Carbon nitride,metal nitrides,phosphides, chalcogenides,perovskites and carbides nanophotocatalysts for environmental applications

Environmental Chemistry Letters - Effective technologies and materials are needed for environmental detoxification and clean energy production. The actual photocatalytic technology is largely...     

Chromium (VI) biosorption by immobilized Aspergillus niger in continuous flow system with special reference to FTIR analysis

Aspergillus niger was treated with acid and immobilized in calcium alginate matrix. The dynamic removal of Cr (VI) ion was studied using continuously fed column packed with immobilized biosorbent beads. Column experiments were carried out to study the effect of various bed heights (20, 30, 40 cm) under different flow rates (5, 7.5, 10 ml min(-1)) on efficiency of biosorption. The maximum time (1020 minutes; 17 hr) before breakthrough point was observed in case of 40 cm bed height with flow rate of 5ml min(-1). FTIR analysis of acid treated immobilized A. niger was used fora qualitative and preliminary analysis of chemical functional groups present on its cell wall which provided the information on nature of cell wall and Cr (VI) interaction during the process of biosorption. The IR spectra of biosorbent recorded before and after chromium biosorption had shown some changes in the band patterns, which were finally analyzed and was found that chemical interaction such as ion-exchange between carboxyl (-COOH), hydroxyl (-OH) and amine (-NH2) group of biosorbent and Chromium ion were mainlyinvolved in biosorption of Cr (VI) onto A. niger cell wall surface. The biosorbed metal was eluted from biosorbent by using 0.1 M H2SO4 as eluant. Immobilized biosorbent could be reused for five consecutive biosorption and desorption cycles without apparent loss of efficiency after its reconditioning. Considering all above factors together this paper discusses the efficient chromium biosorption process carried out by immobilized A. niger biosorbent.     

Photocatalytic degradation of pharmaceutical micro-pollutants using ZnO

Environmental Science and Pollution Research - This research paper presents the results of an experimental investigation of the degradation of three different contaminants including progesterone...     

Indexing method for assessment of pollution potential of leachate from non-engineered landfill sites and its effect on ground water quality

Dumping of solid waste in a non-engineered landfill site often leads to contamination of ground water due to leachate percolation into ground water. The present paper assesses the pollution potential of leachate generated from three non-engineered landfill sites located in the Tricity region (one each in cities of Chandigarh, Mohali and Panchkula) of Northern India and its possible effects of contamination of groundwater. Analysis of physico-chemical properties of leachate from all the three landfill sites and the surrounding groundwater samples from five different downwind distances from each of the landfill sites were collected and tested to determine the leachate pollution index (LPI) and the water quality index (WQI). The Leachate Pollution Index values of 26.1, 27 and 27.8 respectively for landfill sites of Chandigarh (CHD), Mohali (MOH) and Panchkula (PKL) cities showed that the leachate generated are contaminated. The average pH values of the leachate samples over the sampling period (9.2 for CHD, 8.97 for MOH and 8.9 for PKL) show an alkaline nature indicating that all the three landfill sites could be classified as mature to old stage. The WQI calculated over the different downwind distances from the contamination sites showed that the quality of the groundwater improved with an increase in the downwind distance. Principal component analysis (PCA) carried out established major components mainly from natural and anthropogenic sources with cumulative variance of 88% for Chandigarh, 87.1% for Mohali and 87.8% for Panchkula. Hierarchical cluster analysis (HCA) identifies three distinct cluster types for the groundwater samples. These clusters corresponds to a relatively low pollution, moderate pollution and high pollution regions. It is suggested that all the three non-engineered landfill sites be converted to engineered landfill sites to prevent groundwater contamination and also new sites be considered for construction of these engineered landfill sites as the present dumpsites are nearing the end of their lifespan capacity.     

Removal of hexavalent chromium from contaminated ground water using zero-valent iron nanoparticles

Batch experiments were conducted on ground water samples collected from a site contaminated with Cr(VI) to evaluate the redox potential of zero-valent iron (Fe⁰) nanoparticles for remediation of Cr(VI)-contaminated ground water. For this, various samples of contaminated ground water were allowed to react with various loadings of Fe⁰ nanoparticles for a reaction period of 60 min. Data showed 100% reduction of Cr(VI) in all the contaminated ground water samples after treatment with 0.20 gL⁻¹ of Fe⁰ nanoparticles. An increase in the reduction of Cr(VI) from 45% to 100% was noticed with the increase in the loading of Fe⁰ nanoparticles from 0.05 to 0.20 gL⁻¹. Reaction kinetics of Cr(VI) reduction showed pseudo first-order kinetics with rate constant in the range of 1.1 × 10⁻³ to 3.9 × 10⁻³ min⁻¹. This work demonstrates the potential utility of Fe⁰ nanoparticles in treatment and remediation of Cr(VI)-contaminated water source.     

Characterization and pollutant removal efficiency of biochar derived from baggase,bamboo and tyre

Conversion of broad-spectrum organic waste into carbonaceous biochar has gained enormous interest in past few years. The present study aims to characterize feedstock (FS), i.e. bagasse (Bg), bamboo (Bm) and biochar (BC), i.e. baggase biochar (BBg), bamboo biochar (BBm) and tyre biochar (Ty). Significant changes in elemental composition, atomic ratio, proximate analyses, mineral content and heavy metal content were observed which was well supported by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) analysis. Impregnation with ferric hydroxide was done, and resultant modified biochars (MBC), i.e. iron-impregnated baggase biochar (FeBBg), iron-impregnated bamboo biochar (FeBBm) and iron-impregnated tyre biochar (FeTy), along feedstock and biochar were used for PO₄ ^3?, Pb, Hg and Cu adsorption. In general, BBg, FeBBg, BBm, FeBBm, Ty and FeTy were found to adsorb PO₄ ^3?, Pb, Hg and Cu better than Bg and Bm, except in few cases. Results from adsorption experiments were fitted into Langmuir, Freundlich and Temkin models of isotherms and pseudo-first-order, pseudo-second-order and Elovich models of kinetics. Result of batch study adsorption revealed that maximum adsorption of PO₄ ^3?, Pb, Hg and Cu was done by FeBBg (adsorption mechanism explained by Freundlich model), FeTy (Temkin model), Ty (Langmuir model) and BBm (Langmuir model) respectively. According to R ² values, pseudo-first-order reaction was well suited to PO₄ ^3?, Pb, Hg and Cu adsorption. The optimum pH for maximum adsorption was observed to be 7.4 for PO₄ ^3?, 5 for Cu and 6 for Pb and Hg respectively