Biokinetic modeling of heavy metals in earthworms

Studies concerning bioaccumulation kinetics and bioconcentration factor (BCF) of heavy metals like zinc (Zn), lead (Pb), chromium (Cr), cadmium (Cd), and copper (Cu) in earthworm Eudrilus eugeniae tissues including integument, gizzard, clitellum, and head region were undertaken. Calculated BCF, predicted K _ow, and predicted K _oc showed a significant correlation between heavy metals in different earthworm tissues, in substrate spiked with heavy metals. The regression coefficient (r ²) between heavy metal uptake concentration and exposure time varied between 0.73 and 0.99, indicating significant correlation. The K _oc was a maximum of 13.9016 in case of Cu and integument at an exposure time of 100 days and a minimum of 0.1114 in case of Cr with respect to head at the same exposure time. Earthworms accumulated heavy metals following chronic exposure to municipal solid waste containing heavy metals. BCF and uptake rate kinetics of heavy metals were calculated and showed increased values in head tissue followed by integument.     

Chemical speciation of PM emissions from heavy-duty diesel vehicles equipped with diesel particulate filter (DPF) and selective catalytic reduction (SCR) retrofits

Four heavy-duty diesel vehicles (HDDVs) in six retrofitted configurations (CRT^®, V-SCRT^®, Z-SCRT^®, Horizon, DPX and CCRT^®) and a baseline vehicle operating without after--treatment were tested under cruise (50 mph), transient UDDS and idle driving modes. As a continuation of the work by Biswas et al. [Biswas, S., Hu, S., Verma, V., Herner, J., Robertson, W.J., Ayala, A., Sioutas, C., 2008. Physical properties of particulate matter (PM) from late model heavy-duty diesel vehicles operating with advanced emission control technologies. Atmospheric Environment 42, 5622–5634.] on particle physical parameters, this paper focuses on PM chemical characteristics (Total carbon [TC], Elemental carbon [EC], Organic Carbon [OC], ions and water-soluble organic carbon [WSOC]) for cruise and UDDS cycles only. Size-resolved PM collected by MOUDI–Nano-MOUDI was analyzed for TC, EC and OC and ions (such as sulfate, nitrate, ammonium, potassium, sodium and phosphate), while Teflon coated glass fiber filters from a high volume sampler were extracted to determine WSOC. The introduction of retrofits reduced PM mass emissions over 90% in cruise and 95% in UDDS. Similarly, significant reductions in the emission of major chemical constituents (TC, OC and EC) were achieved. Sulfate dominated PM composition in vehicle configurations (V-SCRT^®-UDDS, Z-SCRT^®-Cruise, CRT^® and DPX) with considerable nucleation mode and TC was predominant for configurations with less (Z-SCRT^®-UDDS) or insignificant (CCRT^®, Horizon) nucleation. The transient operation increases EC emissions, consistent with its higher accumulation PM mode content. In general, solubility of organic carbon is higher (average ～5 times) for retrofitted vehicles than the baseline vehicle. The retrofitted vehicles with catalyzed filters (DPX, CCRT^®) had decreased OC solubility (WSOC/OC: 8–25%) unlike those with uncatalyzed filters (SCRT^®s, Horizon; WSOC/OC ～ 60–100%). Ammonium was present predominantly in the nucleation mode, indicating that ternary nucleation may be the responsible mechanism for formation of these particles.     

Solvent tolerant marine bacterium Bacillus aquimaris secreting organic solvent stable alkaline cellulase

The organic solvent tolerant bacteria with their physiological abilities to decontaminate the organic pollutants have potentials to secrete extracellular enzymes of commercial importance. Of the 19 marine bacterial isolates examined for their solvent tolerance at 10 vol.% concentration, one had the significant tolerance and showed a relative growth yield of 86% for acetone, 71% for methanol, 52% for benzene, 35% for heptane, 24% for toluene and 19% for ethylacetate. The phylogenetic analysis of this strain using 16S rDNA sequence revealed 99% homology with Bacillus aquimaris. The cellulase enzyme secreted by this strain under normal conditions showed an optimum activity at pH 11 and 45 °C. The enzyme did show functional stability even at higher pH (12) and temperature (75 °C) with residual activity of 85% and 95% respectively. The enzyme activity in the presence of different additives were in the following order: Co⁺² > Fe⁺² > NaOCl₂ > CuSO₄ > KCl > NaCl. The enzyme stability in the presence of solvents at 20 vol.% concentration was highest in benzene with 122% followed by methanol (85%), acetone (75%), toluene (73%) and heptane (42%). The pre-incubation of enzyme in ionic liquids such as 1-ethyl-3-methylimidazolium methanesulfonate and 1-ethyl-3-methylimidazolium bromide increased its activity to 150% and 155% respectively. The change in fatty acid profile with different solvents further elucidated the physiological adaptations of the strain to tolerate such extreme conditions.     

The nexus between environmental regulations,economic growth,and environmental sustainability: linking environmental patents to ecological footprint reduction in South Asia

Environmental Science and Pollution Research - Environmental sustainability has become a major concern for policymakers across the globe. In this regard, understanding the factors responsible for...     

Assessment of urban sprawl characteristics in Indian cities using remote sensing: case studies of Patna,Ranchi, and Srinagar

Environment, Development and Sustainability - The rapid urban growth in mid-sized cities of developing nations has induced conflict between development and the environment, often leading to urban...     

Determining groundwater quality using indices and multivariate statistical techniques: a study of Tosham block,Haryana, India

Environmental Geochemistry and Health - Water is the most important component for human survival and often the most misused one. The present study deals with the assessment of groundwater quality...     

Seawater intrusion vulnerability in the coastal aquifers of southern India—an appraisal of the GALDIT model,parameters’ sensitivity,and hydrochemical indicators

An appraisal of seawater intrusion into the coastal aquifers is one of the major issues for groundwater resource management. The GALDIT model applies to the analysis of multiple parameters using systematic GIS techniques for mapping and assessment of seawater intrusion vulnerability. It demarcates the mapping of potential vulnerability that shows a higher vulnerability to seawater intrusion in various parts of the coast and the estimated vulnerability index value of 7.50 and 9.64. An area of 33.0 km² spread in the low-lying coastal area comprising estuaries, salt marshes, and saltpans shows the high vulnerability condition with an estimated vulnerability value of 6.42–7.50. An area of 73.20 km² spread over coastal and alluvial plains experiences moderate vulnerability (temporal salinity in the groundwater sources) with an estimated vulnerability index value of 5.46–6.42. Aquifers underlying coastal uplands (hard rock formations) and some parts of accretionary beaches (2.05 km²) are relatively protected fresh groundwater sources, wherein the estimated vulnerability index is 4.55–5.46. The vulnerability mapping of the GALDIT model using hydrochemical analysis of primary groundwater parameters such as TDS, Cl^?, HCO₃, and Cl^?/HCO₃ ratio is validated. Higher concentration of TDS (2637–4162 mg/l) and Cl^? (1268–2347 mg/l) is taken for the areas falling under higher vulnerability to seawater intrusion, especially in the placer mining sites and coastal areas facing erosion. Similarly, the groundwater sources of the low-lying areas including estuaries, salt marshes, saltpans, and backwater were noted to have higher values of Cl^?/HCO₃ with a rationality of 9.87–12.18. Hydrological facies shows the highest concentration of NaCl in the groundwater sources within the proximity of eroded beaches, saltwater bodies, and sand mining areas. A hydrochemical facies evolution (HFE) diagram represents the hydrochemical facies of groundwater elements that shows an intrusion of seawater into the coastal aquifers underlying the very high vulnerable zones. Higher bicarbonate concentration (233–318 mg/l) is noticed in the upland areas and some parts of dunes and accreted beaches, sandy coasts, and uplands. Vulnerability analysis reveals that those areas near saltwater bodies and eroding coasts are prone to lateral and vertical diffusion of saltwater. The geodatabase developed through such modeling studies can help in planning and developing activities for sustainable groundwater resource management in coastal areas.

     

Biodegradable/Bio-plastics: Myths and Realities

Journal of Polymers and the Environment - The plastics industry is proliferating continuously and the global plastics production in 2018 has reached around 360 million tones. This has further...     

The effect of environmental remediation on the cesium-137 levels in white-tailed deer

Due to activities involving nuclear energy research during the latter half of the 1900s, environmental contamination in the form of elevated cesium-137 levels was observed within the Brookhaven National Laboratory, a US Department of Energy facility. Between the years 2000 and 2005, the laboratory carried out a major soil cleanup effort to remove cesium-137 from contaminated sites. In this study, we examine the effectiveness of the cleanup effort by comparing the levels of cesium-137 in the meat of white-tailed deer found within and around the laboratory. Results suggest that the cleanup was effective, with mean concentration of cesium-137 in the meat from within the laboratory decreasing from 2.04 Bq/g prior to 1.22 Bq/g after cleanup. At the current level, the consumption of deer would not pose any human health hazard. Nevertheless, statistically higher levels of cesium-137 were detected in the deer within the laboratory as opposed to levels found in deer 1 mi beyond the laboratory site.