Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Investigation to meet China II emission legislation for marine diesel engine with diesel methanol compound combustion technology

In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time, the use of clean and renewable alternative fuel for marine engines is a promising option. In this study, a marine diesel engine, which was modified to run in diesel methanol compound combustion (DMCC) mode, was investigated. After the diesel injection parameters were calibrated, and combined with a sample after-treatment device DOC (diesel oxidation catalyst), the engine could meet the requirements of China II legislation. The overall MSP (methanol substitute percent) reached 54.1%. The value of each pollutant emission was much lower than that in China II emission legislation, and there was almost no methanol and formaldehyde emissions. When methanol was injected into the inlet manifold, the intake air temperature decreased a lot, as well as the exhaust gas temperature, which were beneficial to increase engine thermal efficiency and improve engine room environment. Compared with the engine running in pure diesel mode, when the engine ran in diesel/methanol dual fuel mode, the combustion phase was advanced, and the combustion duration became shorter. Therefore, the engine thermal efficiency increased, and fuel consumption decreased significantly.     

过硫酸钠缓释材料的释放性能及其对2, 4-二硝基甲苯的降解效果

针对原位化学氧化技术修复土壤和地下水时氧化剂因释放过快而导致的利用率低等问题,通过熔化成型法制备过硫酸钠缓释材料,分析石蜡、硅砂和过硫酸钠不同配比对材料成型度和释放性能的影响,研究缓释过程中溶液pH的变化,探讨其在水溶液中的缓释行为及其对2,4-二硝基甲苯（2,4-DNT）的降解效果.结果表明:当固定过硫酸钠质量为6 g、硅砂质量为18 g、蜡砂比（石蜡、硅砂质量之比）为1:4~1:8时,过硫酸钠缓释材料成型度适中,且过硫酸钠的累积缓释量随着时间的延长而逐渐增大,第31天时过硫酸钠累积释放百分比为74.67%~88.40%,可实现过硫酸钠的持续可控释放.当硅砂质量为18 g、蜡砂比为1:1~1:6时,过硫酸钠累积释放百分比随着过硫酸钠质量的增加而增大,且溶液中的pH呈先降低后上升的变化规律.缓释材料缓释前后实物图和显微镜分析结果显示,过硫酸钠缓释材料的释放是一个由外到内、速率由快变慢最终趋于平稳的过程.过硫酸钠质量为12 g、硅砂质量为18 g、蜡砂比为1:4的缓释材料对2,4-DNT具有较好的降解效果,第16次置换浓度为0.2 mg/L的2,4-DNT水溶液时,2,4-DNT的降解率为56.38%.研究显示,改变制备材料的配比可有效实现缓释材料中过硫酸钠的缓慢释放及对污染物的有效降解,可为原位化学氧化修复土壤和地下水提供理论支撑.      

高原湖泊沉积物中反硝化微生物的群落特征——以包头南海湖为例

为了探明内蒙古高原富营养化城市湖泊中nirS型反硝化细菌群落结构的特异性,利用特异性功能基因nirS对包头市南海湖的表层沉积物进行反硝化细菌多样性测定,在分析各采样点沉积物理化指标的基础上,对各样品中nirS型反硝化细菌群落和多样性进行研究.结果表明,南海湖沉积物Shannon指数变化为3.07~3.41,相比于其他研究,反硝化微生物多样性相对较低.参与反硝化的优势菌属与大多数湖泊保持一致,以假单胞菌属（Pseudomonas）和红杆菌属（Rhodobacter）为主.冗余分析（RDA）指出,城市湖泊中的各种类型的污染物对反硝化优势菌属有明显的促进作用,红杆菌属（Rhodobacter）与硝酸盐氮、亚硝酸盐氮呈正相关,假单胞菌属（Pseudomonas）除受硝酸盐氮、亚硝酸盐氮的影响外,还与总磷呈较强的正相关.南海湖nirS型反硝化细菌中的主要菌属促进了反硝化作用,加速了南海湖氮素的去除.     

地方环境约束目标对经济增长的影响效应

从2003~2017年中国283个地级市的政府工作报告中,收集了各年度各城市的环境保护约束目标,考察了各类环境约束目标对经济增长的影响.研究发现,对于SO₂等工业污染物的直接约束能够在促使政府提升环境治理力度的同时,释放经济增长红利;关于空气质量优良天数和PM_2.5浓度的间接约束不足以刺激污染型企业转型,且导致经济增长速度放缓.无环境约束将产生正向经济增长效应,但会以环境污染为代价.中间机制检验结果显示,产业结构和环境治理是环境约束影响经济增长的主要传导渠道.在环境保护约束的特征方面,约束目标“加码”将抑制经济增长,设定污染物减排区间更有利于发挥经济增长效应.经济与环境协调度方面,对环境污染物设定约束目标有助于促进经济与环境协调发展,无约束则不利于经济增长和环境保护双重目标的实现.地方政府应在明确设定污染物排放目标的基础上,遵循渐进原则对环境保护约束目标进行调整.     

广东省沿岸海域藻华发生的时空特征

本文收集了1980—2017年广东省沿岸藻华发生数据,并进行了系统分析,结果表明藻华发生区域主要集中于珠江口附近、大鹏湾和大亚湾水域,具有明显的时空特征。不同区域的藻华种类差异明显,广东西部多发硅藻藻华,广东中部多发甲藻藻华,广东东部多发金藻藻华。且各地区主要藻华种类的发生也呈现出不同的年际和季节差异,广东沿岸中部地区每年几乎都有藻华出现,其中大鹏湾海域在2000年以后无硅藻藻华发生,大亚湾海域在2002年之前以硅藻藻华为主,2002年以后以甲藻藻华为主;而东部和西部在2000年以前几乎无藻华发生,直到2000年以后才开始频繁出现藻华。西部地区（湛江海域）夏季多发硅藻藻华,中部地区的珠江口春季多发有毒藻华,大鹏湾春季多发夜光藻（Noctiluca scintillans）藻华,大亚湾夏秋季节多发锥状斯氏藻（Scrippsiella trochoidea）藻华,广东东部的球形棕囊藻（Phaeocystis globosa）藻华可在全年出现。综上,广东省藻华原因种类分布具有明显的地域和季节特征,因此需要对不同地区的藻华发生情况和可能诱因进行有针对性的监测和研究,采取区域化的管理,以期能够更合理高效地利用和保护广东省的海洋资源。     

A novel state-of-charge-based method for plug-in hybrid vehicle electric distance analysis validated with actual driving data

Mitigation and Adaptation Strategies for Global Change - Promoting Plug-In Hybrid Vehicles (PHEVs) is viewed as a promising strategy to mitigate the energy consumption and greenhouse gas...     

Well-to-wheels greenhouse gas and air pollutant emissions from battery electric vehicles in China

Mitigation and Adaptation Strategies for Global Change - Electric vehicles (EVs) play a crucial role in addressing climate change and urban air quality concerns. China has emerged as the global...     

Optimal range of plug-in electric vehicles in Beijing and Shanghai

Both China’s national subsidy policies for plug-in electric vehicles (PEVs) purchasers and passenger cars corporate average fuel consumption and new vehicle credit regulation (dual-credit policy) favor long-range 300+ km battery electric vehicles (BEVs) and 80+ km plug-in hybrid electric vehicles (PHEVs). However, these electric vehicles tend to have lower energy efficiency and higher purchase and operation costs. Vehicle with larger batteries can also be less equitable because the subsidies are often provided to more expensive vehicles and wealthier owners. This study takes advantage of a novel dataset of daily driving data from 39,854 conventional gasoline vehicles in Beijing and 4999 PHEVs in Shanghai to determine the optimal range of BEVs and PHEVs within their respective cities. We simulate a model to explore ranges with which PEVs emit less GHGs than that of a baseline hybrid and conventional gasoline vehicle while ensuring that all daily travel demands are met. Our findings indicate that in both cities, the optimal ranges to balance cost and travel demand for BEVs are 350 km or less and for PHEVs are 60 km or less in Beijing and 80 km or less in Shanghai. We also find that to minimize carbon dioxide (CO₂) emissions, the ranges are even lower 10 km in Beijing and 30 km in Shanghai. Our study suggests that instead of encouraging long-range PEVs, governments should subsidize PEV models with shorter ranges. Parallel efforts should also be made to both increase renewable energy over fossil fuels and expand charging facilities. Although individual mobility demand varies, the government could reduce occasional long-distance driving by subsidizing alternative transportation choices. Providing week-long driving trials to consumers before their purchases may help decrease the demand of very long range PEVs by alleviating the range anxiety through a learning process.