Hydrolytic dynamics of pesticide N''-(2,4-dimethylphenyl) -N-methylformamidine in aquatic solution

ＨｙｄｒｏｌｙｔｉｃｄｙｎａｍｉｃｓｏｆｐｅｓｔｉｃｉｄｅＮ＇－（２，４－ｄｉｍｅｔｈｙｌｐｈｅｎｙｌ）－Ｎ－ｍｅｔｈｙｌｆｏｒｍａｍｉｄｉｎｅｉｎａｑｕａｔｉｃｓｏｌｕｔｉｏｎ￥ＭｏＨａｎｈｏｎｇ；ＹａｎｇＫｅｗｕ；ＡｎＦｅｎｇｃｈｕｎ；ＬｉｕＹｅ...     

泰国和越南的产业改革和养虾业通向生态、社会及经济可持续发展的道路

越南的养虾业正处在对生产体系的基础改造,使其转变成一个重要产业的过程中.该地区其他国家的经验,特别是高投入生产体系占主导地位的泰国的经验表明,现在正是通过干预使养虾业改道进入在生态、社会和经济上更可持续的道路.在泰国,实施强化的体系和复杂的产业组织的多年经验并没有获得可持续的解决办法.这里所面临的任务是使社会重新赢得控制并沿着更有效和良性发展的道路改变改革的发展方向.我们的分析结果表明,这两个国家的现行方法不可能使养虾业可持续的发展,需要对整个对虾的生产、喂养、加工、供销及管理的方式进行全面改革.     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

马铃薯淀粉废水的碱式聚合氧化铝处理

本文介绍了用碱式聚合氯化铝处理高浓度有机淀粉废水的效果。用实验室配制的CODw浓度为10000－15000mg/L的淀粉废水以不同用量的碱式聚合氯化铝为絮凝剂处理后，CODw去除率达到28％－47％，再经吸附柱吸附后，CODw去除率可达到65％。     

电子废弃物循环利用与自愿协议式管理

随着电子废弃物数量的激增和非正规电子废弃物处理企业生产对环境影响,中国电子废弃物问题日益凸现出来.在我国,电子废弃物正成为一类重要废弃物,据估计,电子废弃物产出量以每年13～15%的速度增长,其增速是普通生活垃圾的3倍.如何解决我国电子废弃物问题不仅是环境保护的要求,也是经济发展的要求.电子废弃物的循环利用是电子废弃物管理和治理的最佳途径.电子废弃物的自愿协议式管理作为一种新的环境管理方式,对于改善电子废弃物管理现状、提高废弃物循环利用率、减少电子废弃物产生、降低电子废弃物的危害等具有广阔的应用前景.     

Mobility control: How injected surfactants and biostimulants may be forced into low‐permeability units

Recovering dense nonaqueous‐phase liquid (DNAPL) remains one of the most difficult problems facing the remediation industry. Still, the most common method of recovering DNAPL is to physically remove the contaminants using common technologies such as total fluids recovery pumps, vacuum systems, and “pump‐and‐treat.” Increased DNAPL removal can be attained using surfactants to mobilize and/or solubilize the pollutants. However, very little is understood of the methods developed by petroleum engineers beginning in the 1960s to overcome by‐passed, low‐permeability zones in heterogeneous oil reservoirs. By injecting or causing the formation of viscous fluids in the subsurface, petroleum engineers caused increased in‐situ pressures that forced fluid flow into low permeability units as well as the higher permeability thief zones. Polymer flooding involves injecting a viscous aqueous polymer solution into the contaminated aquifer. Foam flooding involves injecting surfactant to decontaminate the high‐permeability zones and then periodic pulses of air to cause a temporary viscous foam to form in the high‐permeable zones after all DNAPL is removed. Later surfactant pulses are directed by the foam into unswept low‐permeable units. These methods have been applied to DNAPL removal using surfactants but they can also be applied to the injection of bio‐amendments into low‐permeability zones still requiring continued remediation. Here we discuss the principles of mobility control as practiced in an alluvial aquifer contaminated with chlorinated solvent and coal tar DNAPLs as well as some field results. © 2003 Wiley Periodicals, Inc.     

Effect of soil solids concentration in batch tests on the partition coefficients of organic pollutants in landfill liner-soil materials

 The effect of the soil solids concentration in batch tests on the measured values of the partition coefficient (K _p) of organic pollutants in landfill liner-soil material was investigated. Since this study was based on the results of batch and column tests conducted independently, there were limitations to the conclusions derived. The organic compounds tested were benzene, methylene chloride, toluene, trichloroethylene, and p-xylene. The results of this study showed that as soil solids concentrations increased, the measured K _p values of these organic compounds strongly decreased. The observed values of K _p stabilized when the soil solids concentration was above a certain value. Typical K _p values obtained from batch tests conducted under high soil solids concentrations were close to those obtained from column tests. It was concluded that the K _p values of organic compounds measured under low soil solids concentrations, i.e., less than 100 g/l, may not correctly simulate the field situation. Consequently, the values of K _p obtained with low soil solids concentrations can result in an overestimation of the retardation factor of the landfill liner material. Received: March 14, 2002 / Accepted: August 25, 2002     

STREAM DISCHARGE PREDICTION VIA A GRID BASED SOIL WATER ROUTING WITH PADDY FIELDS1

ABSTRACT: A grid based daily hydrologic model for a watershed with paddy fields was developed to predict the stream discharge. ASCII formatted elevation, soil, and land use data supported by the GRASS Geographic Information System are used to generate distributed results such as surface runoff and subsurface flow, soil water content, and evapotranspiration. The model uses a single flow path algorithm and simulates a water balance at each grid element. A linear reservoir assumption was used to predict subsurface runoff components. The model was applied to a 75.6 km² watershed located in the middle of South Korea, and observed stream flow hydrographs from 1995 and 1996 were compared to model predictions. The stream flow predictions of 1995 and 1996 generally agreed with the observed flow, resulting in a Nash‐Sutcliffe efficiency R² of 0.60 and 0.62, respectively. The hydraulic conductivity for percolating water through the saturated layer affected baseflow generation. The levee height of the paddy influenced the time and magnitude of the surface runoff, depending on irrigation management. The model will be used for making low flow management decisions by evaluating the role of each land use to stream flow, especially in case of paddy decrease by gradual urbanization of a watershed.