Cytogenetic results from the U.S. collaborative study on CVS

Cytogenetic data are presented for 11 473 chorionic villus sampling (CVS) procedures from nine centres in the U.S. NICHD collaborative study. A successful cytogenetic diagnosis was obtained in 99.7 per cent of cases, with data obtained from the direct method only (26 per cent), culture method only (42 per cent), or a combination of both (32 per cent). A total of 1.1 per cent of patients had a second CVS or amniocentesis procedure for reasons related to the cytogenetic diagnostic procedure, including laboratory failures (27 cases), maternal cell contamination (4 cases), or mosaic or ambiguous cytogenetic results (98 cases). There were no diagnostic errors involving trisomies for chromosomes 21, 18, and 13. For sex chromosome aneuploidies, one patient terminated her pregnancy on the basis of non-mosaic 47,XXX in the direct method prior to the availability of results from cultured cells. Subsequent analysis of the CVS cultures and fetal tissues showed only normal female cells. Other false-positive predictions involving non-mosaic aneuploidies (n = 13) were observed in the direct or culture method, but these cases involved rare aneuploidies: four cases of tetraploidy, two cases of trisomy 7, and one case each of trisomies 3, 8, 11, 15, 16,20, and 22. This indicates that rare aneuploidies observed in the direct or culture method should be subjected to follow-up by amniocentesis. Two cases of unbalanced structural abnormalities detected in the direct method were not confirmed in cultured CVS or amniotic fluid. In addition, one structural rearrangement was misinterpreted as unbalanced from the direct method, leading to pregnancy termination prior to results from cultured cells showing a balanced, inherited translocation. False-negative results (n = 8) were observed only in the direct method, including one non-mosaic fetal abnormality (trisomy 18) detected by the culture method and seven cases of fetal mosaicism (all detected by the culture method). Mosaicism was observed in 0.8 per cent of all cases, while pseudomosaicism (including single trisomic cells) was observed in 1.6 per cent of cases. Mosaicism was observed with equal frequency in the direct and culture methods, but was confirmed as fetal mosaicism more often in cases from the culture method (24 per cent) than in cases from the direct method (10 per cent). The overall rate of maternal cell contamination was 1.8 per cent for the culture method, but there was only one case of incorrect sex prediction due to complete maternal cell contamination which resulted in the birth of a normal male. The rate of maternal cell contamination was significantly higher in samples obtained by the transcervical sampling method (2. 16 per cent) than in samples obtained by the transabdominal method (0.79 per cent). From these data, it is clear that the culture method has a higher degree of diagnostic accuracy than the direct method, which should not be used as the sole diagnostic technique. The direct method can be a useful adjunct to the culture method, in which maternal cell contamination can lead to incorrect sex prediction and potentially to false-negative diagnostic results.     

Atrazine and simazine degradation in Pennisetum rhizosphere

The ability of rhizosphere of four plant species to promote the degradation of charcoal-fixed atrazine and simazine in cement blocks of a long-term contaminated soil when mixed with a normal soil at 1:1 ratio was tested. Of the four selected plants viz., rye grass (Lolium perenne), tall fescue (Festuca arundinacae), Pennisetum (Pennisetum clandestinum) and a spring onion (Allium sp.) used in this study, only P. clandestinum was able to survive in herbicide contaminated soil while other plants died within few days after germination/transplanting. Both atrazine and simazine were degraded at a faster rate in contaminated soil planted to P. clandestinum than in unplanted soil. Within 80 days, nearly 45% and 52% of atrazine and simazine, respectively, were degraded in soil planted to P. clandestinum while only 22% and 20% of the respective herbicide were degraded in the unplanted soil. During 80-day experimental period, both microbial biomass and soil dehydrogenase activity were significantly increased (7-fold) in soil planted to P. clandestinum over that in unplanted soil. The suspension of contaminated rhizosphere soil, planted to P. clandestinum exhibited an exceptional capability to degrade both atrazine (300 microg) and simazine (50 microg) in a mineral salts medium over that of non-rhizosphere soil suspension. Results indicate that P. clandestinum, a C4 plant, may be useful for remediation of soils contaminated with atrazine and simazine.     

Hidden values in bauxite residue (red mud): Recovery of metals

Bauxite residue (red mud) is a hazardous waste generated from alumina refining industries. Unless managed properly, red mud poses significant risks to the local environment due to its extreme alkalinity and its potential impacts on surface and ground water quality. The ever-increasing generation of red mud poses significant challenges to the aluminium industries from management perspectives given the low proportion that are currently being utilized beneficially. Red mud, in most cases, contains elevated concentrations of iron in addition to aluminium, titanium, sodium and valuable rare earth elements. Given the scarcity of iron supply globally, the iron content of red mud has attracted increasing research interest. This paper presents a critical overview of the current techniques employed for iron recovery from red mud. Information on the recovery of other valuable metals is also reviewed to provide an insight into the full potential usage of red mud as an economic resource rather than a waste. Traditional hydrometallurgy and pyrometallurgy are being investigated continuously. However, in this review several new techniques are introduced that consider the process of iron recovery from red mud. An integrated process which can achieve multiple additional values from red mud is much preferred over the single process methods. The information provided here should help to improve the future management and utilization of red mud.     

Investigating mechanical properties and durability of concrete containing recycled rubber ash and fibers

This article investigates the suitability of utilizing end of life rubber tyre particles in concrete as fine aggregate. Rubber ash and rubber fibers were used to develop two series of rubber ash concrete (series I) and hybrid concrete (series II) mixes. The natural fine aggregate was replaced by rubber ash (by volume of 5%, 10%, 15% and 20%) in series I; whereas in series II, the amount of rubber ash was kept constant at 10% and rubber fiber was introduced as replacement of fine aggregate (by volume of 5%, 10%, 15%, 20% and 25%). The concrete mixes were evaluated for compressive strength, flexural strength, resistance to impact loading, fatigue loading, water penetration and shrinkage strain was evaluated. It was observed that inclusion of rubber ash resulted in the improvement of impact resistance of concrete. The results also show that up to 10% rubber ash and rubber fibers can be utilized as fine aggregate to develop feasible and durable rubberized concrete pavements, crash barriers and paver blocks.

     

Effect of industrial waste products on phosphorus mobilisation and biomass production in abattoir wastewater irrigated soil

This study evaluated the effect of alkaline industrial by-products such as flyash (FA) and redmud (RM) on phosphorus (P) mobilisation in abattoir wastewater irrigated soils, using incubation, leaching and plant growth (Napier grass [Pennisetum purpureum]) experiments. The soil outside the wastewater irrigated area was also collected and treated with inorganic (KH₂PO₄ [PP]) and organic (poultry manure [PM]) P treatments, to study the effect of FA and RM on P mobilisation using plant growth experiment. Among the amendments, FA showed the highest increase in Olsen P, oxalic acid content and phosphatase activity. The highest increase in Olsen P for PM treated non-irrigated soils showed the ability of FA and RM in mobilising organic P better than inorganic P (PP). There was over 85 % increase in oxalic acid content in the plant growth soils compared to the incubated soil, showing the effect of Napier grass in the exudation of oxalic acid. Both amendments (FA and RM) showed an increase in phosphatase activity at over 90 % at the end of the 5-week incubation period. The leaching experiment indicated a decrease in water soluble P thereby ensuring the role of FA and RM in minimising P loss to water bodies. FA and RM showed an increase in plant biomass for all treatments, where FA amended soil showed the highest increase as evident from FA’s effect on Olsen P. Therefore, the use of FA and RM mobilised P in abattoir wastewater irrigated soils and increased biomass production of Napier grass plants through root exudation of oxalic acid.     

Optimizing the position of insulating materials in flat roofs exposed to sunshine to gain minimum heat into buildings under periodic heat transfer conditions

Building roofs are responsible for the huge heat gain in buildings. In the present work, an analysis of the influence of insulation location inside a flat roof exposed directly to the sun’s radiation was performed to reduce heat gain in buildings. The unsteady thermal response parameters of the building roof such as admittance, transmittance, decrement factor, and time lags have been investigated by solving a one-dimensional diffusion equation under convective periodic boundary conditions. Theoretical results of four types of walls were compared with the experimental results available in literature. The results reveal that the roof with insulation placed at the outer side and at the center plane of the roof is the most energy efficient from the lower decrement factor point of view and the roof with insulation placed at the center plane and the inner side of the roof is the best from the highest time lag point of view among the seven studied configurations. The composite roof with expanded polystyrene insulation located at the outer side and at the center plane of the roof is found to be the best roof from the lowest decrement factor (0.130) point of view, and the composite roof with resin-bonded mineral wool insulation located at the center plane and at the inner side of the roof is found to be energy efficient from the highest time lag point (9.33 h) of view among the seven configurations with five different insulation materials studied. The optimum fabric energy storage thicknesses of reinforced cement concrete, expanded polystyrene, foam glass, rock wool, rice husk, resin-bonded mineral wool, and cement plaster were computed. From the results, it is concluded that rock wool has the least optimum fabric energy storage thickness (0.114 m) among the seven studied building roof materials.     

Simultaneous Control of Hg0, SO2, and NOx by Novel Oxidized Calcium-Based Sorbents

Abstract

Efforts to develop multipollutant control strategies have demonstrated that adding certain oxidants to different classes of Ca-based sorbents leads to a significant improvement in elemental Hg vapor (Hg⁰), SO₂, and NO_x removal from simulated flue gases. In the study presented here, two classes of Ca-based sorbents (hydrated limes and silicate compounds) were investigated. A number of oxidizing additives at different concentrations were used in the Ca-based sorbent production process. The Hg⁰, SO₂, and NO_x capture capacities of these oxidant-enriched sorbents were evaluated and compared to those of a commercially available activated carbon in bench-scale, fixed-bed, and fluid-bed systems. Calcium-based sorbents prepared with two oxidants, designated C and M, exhibited Hg⁰ sorp-tion capacities (~100 μg/g) comparable to that of the activated carbon; they showed far superior SO₂ and NO_x sorption capacities. Preliminary cost estimates for the process utilizing these novel sorbents indicate potential for substantial lowering of control costs, as compared with other processes currently used or considered for control of Hg⁰, SO₂, and NO_x emissions from coal-fired boilers. The implications of these findings toward development of multipollutant control technologies and planned pilot and field evaluations of more promising multipollutant sorbents are summarily discussed.     

Preliminary Estimates of Performance and Cost of Mercury Control Technology Applications on Electric Utility Boilers

ABSTRACT

Under the Clean Air Act Amendments of 1990, the U.S. Environmental Protection Agency (EPA) determined that regulation of mercury emissions from coal-fired power plants is appropriate and necessary. To aid in this determination, preliminary estimates of the performance and cost of powdered activated carbon (PAC) injection-based mercury control technologies were developed. This paper presents these estimates and develops projections of costs for future applications.

Cost estimates were developed using PAC to achieve a minimum of 80% mercury removal at plants using electrostatic precipitators and a minimum of 90% removal at plants using fabric filters. These estimates ranged from 0.305 to 3.783 mills/kWh. However, the higher costs were associated with a minority of plants using hot-side electrostatic precipitators (HESPs). If these costs are excluded, the estimates range from 0.305 to 1.915 mills/kWh. Cost projections developed using a composite lime-PAC sorbent for mercury removal ranged from 0.183 to 2.270 mills/kWh, with the higher costs being associated with a minority of plants that used HESPs.     

Perchlorate contamination of groundwater from fireworks manufacturing area in South India

Perchlorate contamination was investigated in groundwater and surface water from Sivakasi and Madurai in the Tamil Nadu State of South India. Sensitive determination of perchlorate (LOQ?=?0.005 μg/L) was achieved by large-volume (500 μL) injection ion chromatography coupled with tandem mass spectrometry. Concentrations of perchlorate were <0.005–7,690 μg/L in groundwater (n?=?60), <0.005–30.2 μg/L in surface water (n?=?11), and 0.063–0.393 μg/L in tap water (n?=?3). Levels in groundwater were significantly higher in the fireworks factory area than in the other locations, indicating that the fireworks and safety match industries are principal sources of perchlorate pollution. This is the first study that reports the contamination status of perchlorate in this area and reveals firework manufacture to be the pollution source. Since perchlorate levels in 17 out of 57 groundwater samples from Sivakasi, and none from Madurai, exceeded the drinking water guideline level proposed by USEPA (15 μg/L), further investigation on human health is warranted.     

Study of atmospheric stagnation, recirculation and ventilation potential at Narora Atomic Power Station NPP site

The atmosphere is an important pathway to be considered in assessment of the environmental impact of radioactivity releases from nuclear facilities. The estimation of concentration of released effluents in air and possible ground contamination needs an understanding of relevant atmospheric dispersion. This paper describes the meteorological characteristics of Narora Atomic Power Station (NAPS) Nuclear Power Project site by using the integral parameters developed by Allwine and Whiteman (Atmospheric Environment 28(4):713–721, 1994). Meteorological data measured during the period 2006–2010 were analysed. The integral quantities related to the occurrence of stagnation, recirculation and ventilation characteristics were studied for the NAPS site to assess the dilution potential of the atmosphere. Wind run and recirculation factors were calculated for a 24-h transport time using 5 years of hourly surface measurements of wind speed and direction. The occurrence of stagnation, recirculation and ventilation characteristics during 2006–2010 at the NAPS site is observed to be 33.8, 19.5 and 34.7 % of the time, respectively. The presence of strong winds with predominant wind direction NW and WNW during winter and summer seasons leads to higher ventilation (48.1 and 44.3 %) and recirculation (32.6 % of the summer season). The presence of more dispersed light winds during pre-winter season with predominant wind directions W and WNW results in more stagnation (59.7 % of the pre-winter season). Thus, this study will serve as an essential meteorological tool to understand the transport mechanism of atmospheric radioactive effluent release from any nuclear industry during the pre-operational as well as operational phase.