Monitoring of ambient particles and heavy metals in a residential area of Seoul, Korea

In this study, ambient TSP, PM10, and PM2.5 in a residential area located in the northern part of Seoul were monitored every other month for 1 year from April 2005 to February 2006. The monthly average levels of TSP, PM10, and PM2.5 had ranges of 71∼158, 40∼106, and 28∼43 μg/m³, respectively. TSP and PM10 showed highest concentration in April; this seems to be due to Asian dust from China and/or Mongolia. However, the fine particle of PM2.5 showed a relatively constant level during the monitoring period. Heavy metals in PM 10 and PM2.5, such as Cr, As, Cd, Mn, Zn and Pb, were also analysed during the same period. The monthly average concentrations of heavy metal in PM2.5 were Cr:1.9∼22.7 ng/m³; As:0.9∼2.5 ng/m³; Cd: 0.6∼7 ng/m³; Mn:6.1∼22.6 ng/m³; Zn: 38.9∼204.8 ng/m³, and Pb: 21.6∼201.1 ng/m³. For the health risk assessment of heavy metals in ambient particles, excess cancer risks were calculated using IRIS unit risk. As a result, the excess cancer risks of chromium, cadmium, and arsenic were shown to be more than one per million based on the annual concentration of heavy metals, and chromium showed the highest excess cancer risk in ambient particles in Seoul.     

Characterization of metal aerosols in PM10 from urban, industrial, and Asian Dust sources

Metallic elements (As, Be, Ca, Cd, Co, Cr, Fe, K, Mn, Ni, Pb, Sb, Se, and Zn) in PM10 aerosols were determined at urban and industrial sites, which are affected by traffic and residential sources, metallurgical activity, and petrochemical and steel works. The effect of the long-range transported Asian Dust on the metal content of aerosols was also examined. At the urban sampling site, concentrations of As, Cd, Pb, Se, and Zn were assigned to road traffic and combustion sources, Ca and Fe to soil dust sources from long-range transported Asian Dusts, and Cr and Ni to metallurgical sources transported from the nearby industrial complex, based on Principal Component Analysis (PCA). Enhanced Cr and Ni concentrations at the metallurgical industrial site suggest that local emissions from metal-assembly facilities and manufacture of alloys contributed to elevated levels of those metals. We also observed that petrochemical activities contributed to increased levels of Sb and Zn. When Asian Dust events occurred, Ca, Fe, K, and Zn concentrations dramatically increased compared to values without the Asian Dust. Two different types of Asian Dust events were observed. For the Asian Dust event 1 (4/1/2007), the Fe and K concentrations were much higher by a factor of 2–3 than those for the Asian Dust event 2 (3/2/2008), while As, Mn, and Zn concentrations were significantly higher on the Asian Dust event 2. Backward trajectory analysis showed that for the Asian Dust event 2, the air mass had passed over the heavily industrialized zones in China during long-range transport to the current sampling site, suggesting that the As, Mn, and Zn may have originated from industrial sources.     

Reduced sulfur compounds in ambient air surrounding an industrial region in Korea

The atmospheric concentrations of several reduced sulfur compounds (RSCs) including H(2)S, CH(3)SH, DMS, CS(2), and DMDS were measured concurrently from a series of field campaigns covering multiple locations in the surroundings of a large industrial region (August 2004 to September 2005). These field studies have been designed and undertaken to inspect the concentrations of RSCs in ambient air. The RSC concentrations were found to occur in a highly variable range. H(2)S (1.06 +/- 2.07 ppb) was found to be the most abundant RSC followed by CS(2) (0.84 +/- 0.54 ppb), DMDS (0.36 +/- 1.21 ppb), DMS (0.24 +/- 0.83 ppb), and CH(3)SH (0.11 +/- 0.23 ppb). The RSC levels measured at the study area were comparable to those observed previously from other polluted environmental settings. When these RSC data were examined further in terms of spatial (industrial vs. non-industrial sites) and seasonal (summer vs. winter seasons) grouping schemes, differences in their concentration levels were statistically insignificant in most cases. In contrast, there were fairly strong variations in temporal patterns over a diurnal cycle. If these RSC concentration data were converted to diagnose the malodor strengths, their effects were in most cases insignificant with minor contribution towards odor nuisances.     

Tracing lead pollution sources in abandoned mine areas using stable Pb isotope ratios

This study focused on Pb isotope ratios of sediments in areas around an abandoned mine to determine if the ratios can be used as a source tracer. For pretreatment, sediment samples were dissolved with mixed acids, and a multi-collector inductively coupled plasma mass spectrometer (MC-ICP-MS, Nu plasma II) was used to investigate the Pb isotopic composition of the samples. The measured isotope ratios were then corrected for instrumental mass fractionation by measuring the ²⁰³Tl/²⁰⁵Tl ratio. Repeated measurements with the NIST SRM 981 reference material showed that the precision of all ratios was below 104 ppm (±2σ) for 50 ng/g. The isotope ratios (²⁰⁷Pb/²⁰⁶Pb) found were 0.85073?±?0.0004~0.85373?±?0.0003 for the main stream, while they were 0.83736?±?0.0010 for the tributary and 0.84393?±?0.0002 for the confluence. A binary mixing equation for isotope ratios showed that the contributions of mine lead to neighboring areas were up to 60 %. Therefore, Pb isotope ratios can be a good source tracer for areas around abandoned mines.     

A study on engineering characteristics of asphalt concrete using filler with recycled waste lime

This study focuses on determining the engineering characteristics of asphalt concrete using mineral fillers with recycled waste lime, which is a by-product of the production of soda ash (Na(2)CO(3)). The materials tested in this study were made using a 25%, 50%, 75%, and 100% mixing ratio based on the conventional mineral filler ratio to analyze the possibility of using recycled waste lime. The asphalt concretes, made of recycled waste lime, hydrated lime, and conventional asphalt concrete, were evaluated through their fundamental engineering properties such as Marshall stability, indirect tensile strength, resilient modulus, permanent deformation characteristics, moisture susceptibility, and fatigue resistance. The results indicate that the application of recycled waste lime as mineral filler improves the permanent deformation characteristics, stiffness and fatigue endurance of asphalt concrete at the wide range of temperatures. It was also determined that the mixtures with recycled waste lime showed higher resistance against stripping than conventional asphalt concrete. It was concluded from various test results that a waste lime can be used as mineral filler and, especially, can greatly improve the resistance of asphalt concrete to permanent deformation at high temperatures.     

Evaluation of operational parameters in thermophilic acid fermentation of kitchen waste

In this study, the effect of operational parameters, such as solids retention time (SRT), pH, and substrate total solids (TS) concentration, on acid fermentation efficiency was investigated. From batch tests, it was shown that the appropriate pH range for thermophilic acidogens was around 6–7 and that the optimum pH condition was 6. From the continuous experiment, pH and SRT were shown to be the most important operational parameters for solubilization and organic acid production. In contrast, TS concentration did not show any obvious effect on chromium chemical oxygen demand (CODcr) solubilization when TS was in the range 3.5%–10%. The optimum operational conditions for thermophilic acid fermentation were an SRT of 2 days and a pH of 6. This research was carried as a part of the CREST project of Japan Science and Technology Agency.     

Toxicity identification and reduction of wastewaters from a pigment manufacturing factory

In this study, major toxicants in pigment wastewaters (i.e. raw wastewater and effluent) were determined by toxicity identification evaluations (TIEs), and changes in their toxicities due to combined gamma-ray (gamma-ray) and ozone treatments were evaluated. From TIE results using Daphnia magna, Cr(VI) and o-toluidine were identified as major toxicants in the raw wastewater with concentrations of 2.47 and 25.3mg l(-1), respectively. This was confirmed by subsequent spiking and mass balance approaches. For effluent, TIE results suggested that organic anions were likely responsible for the observed toxicities. Toxicity reduction tests showed that gamma-rays with ozone treatment after coagulation was more efficient in reducing toxicities in the raw wastewater (3.9-2.0 TU) than gamma-ray treatment alone (3.9-3.1 TU). For pigment effluent, gamma-ray/O3 treatment resulted in a complete removal of the acute toxicity.     

Placental transfer of polychlorinated biphenyls, their hydroxylated metabolites and pentachlorophenol in pregnant women from eastern Slovakia

The aim of the present study was to understand the placental transfer of polychlorinated biphenyls (PCBs), specific hydroxylated PCB metabolites (OH-PCBs), and pentachlorophenol (PCP) in blood serum, in a birth cohort from eastern Slovakia. During the period 2002-2004, cord blood specimens were collected in parallel with maternal specimens from women delivering in the two eastern Slovak districts of Michalovce and Svidnik/Stropkov. A total of 92 pairs of mother-cord specimens at delivery were selected for this study. 4-OH-CB107, 3-OH-CB153, 4-OH-CB146, 3'-OH-CB138, 4-OH-CB187, and 4'-OH-CB172 were quantified. The median concentrations of Sigma(17)PCBs, Sigma(6)OH-PCBs, and PCP in cord serum were 0.92, 0.33, and 0.69 ng/g wet wt., respectively and highly correlated with the corresponding maternal serum levels (correlations were R(2)=0.61, 0.78, and 0.82, respectively). The median cord to mother ratios of the Sigma(17)PCBs, Sigma(6)OH-PCBs, and PCP were 0.18, 0.75, and 1.10, respectively. The median ratio of the Sigma(6)OH-PCBs to the Sigma(17) PCBs in the cord serum was 0.38 from wet weight based concentrations, which was about four times higher than the ratio of these compounds in maternal serum (0.09). PCP was more abundant than any PCB or OH-PCB congener measured in cord serum. The higher cord to maternal ratios of OH-PCB metabolites as compared with the parent compounds suggests either a higher placental transfer rate or greater metabolism in the fetus as compared with the maternal compartment. These findings are consistent with their preferential binding to TTR that can cross the placenta. The cord to maternal ratio varies by congener (e.g., 4-OH-CB107=0.58, 4-OH-CB146=0.74, 3'-OH-CB138=1.01).     

Manganese peroxidase-catalyzed oxidative degradation of vanillylacetone

When 4-(4-hydroxy-3-methoxy-phenyl)-2-butanone (vanillylacetone) was tested for manganese peroxidase (MnP)-catalyzed oxidation, it was found to be degraded with the cleavage of an aromatic ring. Among numerous products of vanillylacetone oxidation, four major ones were purified by thin-layer chromatography and identified using mass spectroscopy (MS) and nuclear magnetic resonance (NMR) analysis. Three of them maintained the aromatic ring structure and were identified as 4-[6,2'-dihydroxy-5,3'-dimethoxy-5'-(3-oxo-butyl)-biphenyl]-butan-2-one, 4-(4-hydroxy-3-methoxyphenyl)-3-buten-2-one, and 4-[6,2'-dihydroxy-5,3'-dimethoxy-5'-(3-oxo-butyl)-biphenyl]-3-buten-2-one. Even though the fourth product could not be purified to a single compound, data from infrared spectroscopy showed that it did not have a benzene ring. From MS and NMR analysis, 3-(3-oxo-butyl)-hexa-2,4-dienedioic acid-1-methyl ester was tentatively suggested as the dominant species. The reaction mechanism was suggested on the basis of the structural information of these products. To our knowledge, this paper is the first report on aromatic ring cleavage of the phenolic compound by MnP.     

Two-generation toxicity study on the copepod model species Tigriopus japonicus

Previous studies on the intertidal copepod Tigriopus japonicus have demonstrated that it is a suitable model species for the assessment of acute toxicities of marine pollutants. In order to standardize T. japonicus for use in environmental risk assessment involving whole life cycle exposure, we tested nine pollutants for their effects on growth and reproduction during a two-generation life cycle exposure test. Nauplii (F 0) were exposed to a range of concentrations of each chemical in a static renewal culture system. Broods of the second generation (F1) were subsequently exposed to the same concentrations for one full life cycle. Of the seven traits (nauplius phase, development time, survival, sex ratio, number of clutch, nauplii per clutch and fecundity), only the length of the nauplius phase and development time showed a greater sensitivity to chemical exposure. Between the two sensitive traits, the period of the nauplius phase was more sensitive than cohort generation time. Biocides significantly increased the maturation period of nauplii as well as copepodids in F 0 generation. In this study, it was demonstrated that T. japonicus could also be used in reproduction and life cycle tests and it provides an opportunity for testing the chronic and subchronic toxic effects of marine pollutants. Further validation and harmonization in a multi-centric study involving other laboratories of the region will strengthen its use as a supplement to existing model species.