Properties of Cement Mortar Produced from Mixed Waste Materials with Pozzolanic Characteristics

Waste materials with pozzolanic characteristics, such as sewage sludge ash (SSA), coal combustion fly ash (FA), and granulated blast furnace slag (GBS), were reused as partial cement replacements for making cement mortar in this study. Experimental results revealed that with dual replacement of cement by SSA and GBS and triple replacement by SSA, FA, and GBS at 50% of total cement replacement, the compressive strength (Sc) of the blended cement mortars at 56 days was 93.7% and 92.9% of the control cement mortar, respectively. GBS had the highest strength activity index value and could produce large amounts of CaO to enhance the pozzolanic activity of SSA/FA and form calcium silicate hydrate gels to fill the capillary pores of the cement mortar. Consequently, the Sc development of cement mortar with GBS replacement was better than that without GBS, and the total pore volume of blended cement mortars with GBS/SSA replacement was less than that with FA/SSA replacement. In the cement mortar with modified SSA and GBS at 70% of total cement replacement, the Sc at 56 days was 92.4% of the control mortar. Modifying the content of calcium in SSA also increased its pozzolanic reaction. CaCl(2) accelerated the pozzolanic activity of SSA better than lime did. Moreover, blending cement mortars with GBS/SSA replacement could generate more monosulfoaluminate to fill capillary pores.     

Exploring the Crowding–Satisfaction Relationship in Recreational Boating

Along with the growing boating population and the number of boats in use on limited inland waterways, boater expectations of setting density, safety perceptions, and the associated impacts on their experience (e.g., satisfaction) are becoming increasingly important. The primary purpose of this article was to explore a recreational boating crowding–satisfaction model derived from previous work using safety and enjoyment as mediating variables. We also tested our crowding–satisfaction model among day and overnight users. Our analysis revealed no significant difference between day and overnight users for any of the relationships tested in our model. Our final model indicated as respondents’ expectations for seeing people increased along with their feelings of being crowded, they were more inclined to consider the conditions on the lake as being unsafe. They were also more inclined to indicate that the number of people they had seen on the lake detracted from their boating experience. Respondents’ satisfaction was tied to their perceptions of crowding. Mediating variables illustrated that the relationship was conditioned by perceptions of safety and enjoyment. Analysis of the indirect effect observed in our study illustrate that when the number of people seen on the lake exceed respondents’ expectations, their perceptions of safety and enjoyment both decline, resulting in lower satisfaction. These findings have implications for managing recreational boating use on inland lake systems. Given the role played by expectations in our model, efforts to communicate with boaters about conditions on these waterways is important for helping them plan their boating experience and avoid situations they consider unsafe or unsatisfactory.     

Optimal Design of a Multi-Pollutant Air Quality Monitoring Network in a Metropolitan Region Using Kaohsiung, Taiwan as an Example

An air quality monitoring network (AQMN) usually performs the basic function of assessment of regional air quality and demonstration of compliance with ambient air quality standards in an urban area. Different pollutants, however, may present different characteristic variabilities due to their specific emission patterns, rates of diffusion, and transport and transformation behaviors. But the costs of siting in a pollutant-specific monitoring network would be higher than that for a common network with respect to several pollutants monitored simultaneously. This paper presents a survey of multi-pollutant design principles and optimal searches for siting patterns of an AQMN using both simulation and optimization models as a combined tool. While conservative, quasi-stable, and reactive pollutants are considered in the design principles, cost, coverage effectiveness, and spatial correlation characteristics are included in the multi-criteria decision making process. For illustrative purpose, a series of technical settings and two types of objectives were examined in the case study for the city of Kaohsiung in Taiwan.     

Pore structure effects on Ca-based sorbent sulfation capacity at medium temperatures: activated carbon as sorbent/catalyst support

The reaction between three different Ca-based sorbents and SO2 were studied in a medium temperature range (473-773 K). The largest SO2 capture was found with Ca(OH)2 at 773 K, 126.31 mg SO2 x g Ca(OH)2(-1), and the influence of SO2 concentration on the sorbent utilization was observed. Investigations of the internal porous structure of Ca-based sorbents showed that the initial reaction rate was controlled by the surface area, and once the sulfated products were produced, pore structure dominated. To increase the surface area of Ca-based sorbents available to interact with and retain SO2, one kind of CaO/ activated carbon (AC) sorbent/catalyst was prepared to study the effect of AC on the dispersion of Ca-based materials. The results indicated that the Ca-based material dispersed on high-surface-area AC had more capacities for SO2 than unsupported Ca-based sorbents. The initial reaction rates of the reaction between SO2 and Ca-based sorbents and the prepared CaO/AC sorbents/catalysts were measured. Results showed that the reaction rate apparently increased with the presence of AC. It was concluded that CaO/AC was the active material in the desulfurization reaction. AC acting as the support can play a role to supply O2 to increase the affinity to SO2. Moreover, when AC is acting as a support, the surface oxygen functional group formed on the surface of AC can serve as a new site for SO2 adsorption.     

Low-temperature chromium(VI) biotransformation in soil with varying electron acceptors

Effective and low-cost strategies for remediating chromium (Cr)-contaminated soil are needed. Chromium(VI) leaching from contaminated soil into ground water and surface water threatens water supplies and the environment. This study tested indigenous Cr(VI) microbial transformation in batch systems at 10 degrees C in the presence of various electron acceptors. The effects of carbon addition, spiked Cr(VI), and mixing highly contaminated soil with less contaminated soil were investigated. The results indicated that Cr(VI) can be biotransformed in the presence of different electron acceptors including oxygen, nitrate, sulfate, and iron. Sugar addition had the greatest effect on enhancing Cr(VI) removal. Less dissolved organic carbon (DOC) was consumed per amount of Cr(VI) transformed under anaerobic conditions [0.8-93 mg DOC/mg Cr(VI)] compared with aerobic conditions [1.4-265 mg DOC/mg Cr(VI)]. Toxicity of high concentrations (< 160 mg/L) of spiked Cr(VI) were not evident. At Cr(VI) concentrations > 40 mg/L, aerobic conditions promoted faster Cr(VI) reduction than anaerobic conditions with nitrate or sulfate present. Biotransformation of Cr(VI) in highly contaminated soil (22,000 mg Cr/kg) was facilitated by mixing with less-contaminated soil. The study results provide a framework for evaluating indigenous Cr(VI) microbial transformation and enhance the ability to develop strategies for soil treatment.     

Preparation of novel activated carbons from H2SO4-pretreated corncob hulls with KOH activation for quick adsorption of dye and 4-chlorophenol

Corncob hull was immersed in 25 wt% H(2)SO(4) and was carbonized in an oven at 290 °C for 2h to obtain the char. The char was then activated for 1h at 780 °C by KOH at weight ratio of KOH/char of 2.5, 3.0, and 3.5. SEM photos of the carbons revealed that the cell wall of corncob hull was etched into thin film structure. It was shown that the adsorption isotherms of methylene blue and 4-chlorophenol on the carbons were well fitted by the Langmuir equation. Moreover, the adsorption kinetics could be satisfactorily described by the Elovich equation. The normalized standard deviations are less than 2.8%. The high fraction of adsorption amount adsorbed within 1 min to that at saturation demonstrated the advantage of the prepared activated carbons. The fraction of adsorption amount within 1 min to that at saturation (q(1)/q(mon)) for the adsorption of 4-CP is high up to 0.807. Such quick adsorption behavior was mainly attributed to the presence of the thin film structure of carbons.     

In utero sonographic diagnosis of a communicating enteric duplication cyst in a giant omphalocele

Enteric duplications are rare lesions, and relatively few cases have been diagnosed prenatally. We present, to our knowledge, the first case of an associated communicating ileal duplication cyst in a huge omphalocele diagnosed prenatally. The prenatal ultrasound findings revealed four features of the cystic lesion including peristaltic movements of the cystic wall, communication between the cyst and normal bowel lumen, intra-cystic echogenic contents, and echogenic mesenteric tissue (fat) close to the cyst. These distinct characteristics helped us to make a firm in utero diagnosis. Copyright © 2001 John Wiley & Sons, Ltd.     

A novel single-stage LED driver for energy-saving streetlight applications with interleaved power-factorcorrection

This paper proposes a novel single-stage light-emitting diode (LED) driver with interleaved power-factor corrections (PFC) suitable for energy-saving streetlight applications. The presented circuit combines an interleaved boost PFC converter with a half-bridge-type series-resonant converter cascaded with a full-bridge rectifier into a single-stage power-conversion topology. Two inductors in the interleaved boost PFC converter sub-circuit are designed to operate in discontinuous-conduction mode (DCM) in order to achieve input-current shaping, and the half-bridge-type series-resonant converter cascaded with a full-bridge rectifier is designed to obtain zero-voltage switching (ZVS) on two power switches to reduce their switching losses. The proposed driver features high power factor, low total-harmonic distortion (THD) of input current, and high circuit efficiency, all of which results in energy savings. A prototype driver is developed and implemented to supply a 165W-rated LED streetlight module with utility-line input voltages ranging from 210 V to 230 V. In addition, satisfactory experimental results have demonstrated the feasibility of the proposed LED driver.