Flammability of heat transfer fluid aerosols produced by electrospray measured by laser diffraction analysis

Accidental release of pressurized high flash point heat transfer fluids can result in fire and explosion hazard scenarios in the process industry. An experimental investigation on ignition of aerosols of a heat transfer fluid is carried out, and characterization of aerosol and its ignition process by non-intrusive laser diffraction technique is reported. Propagation speed of the aerosol combustion flame front as analyzed from the laser diffraction measurement agrees with high-speed visual camera observation. Flammability of the aerosol, which is based on the chances of the global flame appearance in the aerosol, is mainly controlled by aerosol droplet size and the droplet volume concentration.     

超声及N掺杂对TiO2光催化降解甲基橙活性的影响

在超声条件下采用溶胶-凝胶法制备了N掺杂纳米TiO2光催化剂,以甲基橙的光催化降解评价其光催化活性.运用XRD、透射电子显微镜、紫外-可见漫反射光谱等技术对试样的粒径、晶体结构及光学性能进行了表征.实验结果表明:超声能明显减小TiO2颗粒的粒径,提高颗粒分散度,提高TiO2在紫外光下的光催化剂活性;超声对N的掺杂产生了促进作用,使N掺杂纳米TiO2对可见光的吸收能力显著增强,在可见光下的光催化降解速率提高23％.     

不同温湿度条件下微米硼的氧化过程研究

目的 探究不同温湿度条件下微米硼的氧化层结构特征。方法 利用高温水浴浸泡处理去除原料微米硼的表面氧化层,然后在恒温恒湿条件下对微米硼进行加速氧化,利用扫描电子显微镜、透射电子显微镜和X射线光电子能谱对加速氧化后硼颗粒的氧化层厚度及组成进行分析,总结表面氧化层结构及成分组成变化规律,揭示温湿度条件下微米硼的氧化机制。结果 微米硼经高温水浴浸泡处理后,表面氧化层去除率达到50%。随着加速氧化时间的延长,硼颗粒氧化层的厚度逐渐增大,由内向外硼颗粒表面可以用B-BxOy-B2O3三层结构来表示,BxOy总是伴随着B2O3同时出现的,且随着氧化反应的进行,颗粒表面BxOy的含量将超过B的含量。结论 不同温湿度条件下微米硼的氧化机制为O2向B颗粒内部单向扩散的反应机制,B先与O2反应,形成低氧化物BxOy,BxOy进而与O2反应生成B2O3。随着氧化层厚度的增加,O2向B颗粒内部扩散的阻力增大,氧化反应速率随之降低。相比湿度的影响,温度的升高可显著加快硼表面氧化层的形成;温度一定时,湿度的增加可促进硼氧化层的形成。     

基质类型及季节变化对人工湿地氮去除效果的影响

考察了基质类型及季节变化对人工湿地氮去除效果的影响,结果显示:基质类型对水平潜流人工湿地氮的去除效果有显著影响,煤渣基质比组合基质更利于提高人工湿地对氮的去除效果;季节不同,人工湿地氮的去除效果存在差异,平均去除率由高到低的顺序为:夏季＞秋季＞春季＞冬季.     

正丁醇对柴油机颗粒组分与形貌特征的影响

为探讨柴油机燃用正丁醇-柴油混合燃料降低颗粒排放的机理,采用热重分析仪与场发射扫描电子显微镜,重点对正丁醇-柴油混合燃料燃烧的颗粒形貌特征进行研究,分析了颗粒的组分、微观结构以及粒径分布随w(正丁醇)的变化规律. 结果表明:正丁醇-柴油混合燃料燃烧的颗粒呈团簇状结构,随着w(正丁醇)的增加,团聚程度逐渐提高,排列结构更加紧密;颗粒的粒径逐渐减小,柴油、B5、B10〔B5、B10是指w(正丁醇)分别为5%、10%的正丁醇-柴油混合燃料〕燃烧的颗粒平均粒径分别为1.43、0.85、0.52 μm;颗粒中的主要成分为碳烟,其质量分数约为60%,随着w(正丁醇)的增加,碳烟和可溶有机物组分的质量分数有所增加,硫酸盐、金属等不易挥发组分以及金属元素的质量分数逐渐减少. 研究显示,添加正丁醇,可促进颗粒转化、改善颗粒的氧化过程,使颗粒向小粒径方向移动;由于颗粒中可溶有机物组分含量增加,因此提高了颗粒在碰撞过程中凝并的概率,致使颗粒的团聚程度增加.      

磁载纳米TiO2复合光催化材料的研究进展

磁载纳米TiO2复合光催化剂是一种无污染,制备成本低,催化活性高,在外加磁场下可迅速分离回收和重复使用的光催化材料,在废水的光催化降解中有着诱人的应用前景.本文综述了不同类型磁载纳米TiO2复合光催化材料的制备方法和光催化性能,总结了其在染料、农药、芳香烃及其衍生物、有害无机离子和有毒气体等各种环境污染物处理中的应用,并展望了磁载纳米TiO2复合光催化剂的发展方向.     

Effects of dissolved organic matter on the desorption of Cd in freeze–thaw treated Cd-contaminated soils

Lab-scale experiments were conducted to investigate the effects of dissolved organic matter (DOM) on the desorption of Cd in freeze–thaw treated Cd-contaminated soils. The results indicated that DOM significantly facilitated the desorption of Cd from freeze–thaw treated soils when comparing with that of non-frozen soils. Effects of DOM on the Cd desorption were highly dependent on the soil type and contamination concentration. The maximum desorption ratios of Cd by DOM generated from straw and sludge were 15.6% and 13.65%, respectively, in brown soils, and the maximum desorption ratios reached 14.7% and 9.3%, respectively, when using black soils through the same treatment. The higher the Cd contamination concentration in soils, the higher the ratio of Cd desorption by DOM. This was because of the integrated effects of the soil properties changed by the freeze–thaw treatment and the species transformation of Cd. The characteristics of DOM, such as its concentration and properties, had shown obvious impacts on the Cd desorption by DOM. The desorption was promoted with the increased DOM concentration and the hydrophilic fraction, and lowered pH and the low-molecular-weight of DOM.     

辽河表层沉积物重金属生态风险与综合毒性表征

采用ICP-MS测定了辽河26个支流表层沉积物间隙水中7种重金属(Pb、Cu、Cr、Zn、Ni、As、Cd)的含量,并应用间隙水毒性基准单位(IWCTU)和Nemeraw指数(NI)对间隙水重金属生态风险进行了评价;同时利用摇蚊幼虫活体生物毒性测试方法评估了辽河流域26个支流表层沉积物的综合毒性。研究结果显示,辽河支流表层沉积物间隙水7种重金属平均含量为:Pb 3.92μg·L-1,Cu 5.73μg·L-1,Cr 7.21μg·L-1,Zn 4.33μg·L-1,Ni 4.48μg·L-1,As 5.89μg·L-1,Cd 0.29μg·L-1,根据IWCTU值和NI值,柴河、养息牧、亮子河、凡河、付家窝堡、接官厅具有潜在的生态风险;综合毒性表征结果表明,柴河、长沟子河、付家窝堡、柳河、一统河、潮沟河表层沉积物对摇蚊幼虫具有较高毒性。结合重金属毒性和综合毒性分析,认为辽河流域支流表层沉积物毒性应该是由复合污染形成,而不仅仅是重金属污染。     

二硫化钼基杂化物对聚合物火灾安全性影响

为改善聚合物材料的火灾安全性,利用二硫化钼(MoS2)的独特性能,结合纳米复合、催化成炭等设计思路,采用共沉淀法制备CeMnOx-MoS2和CeFeOx-MoS2双金属氧化物-MoS2纳米杂化物,并将其分别应用到2种典型聚合物(聚氨酯和环氧树脂)中.结果 表明:2种杂化物均匀分散在聚合物基体中,可有效延缓聚合物材料的热...     

Removal of Mo(VI) from aqueous solutions using sulfuric acid-modified cinder: kinetic and thermodynamic studies

Removal of Mo(VI) from aqueous solutions was investigated using cinder modified by sulfuric acid. Various parameters such as pH, agitation time, Mo(VI) concentration, and temperature have been studied. The maximum adsorption of Mo(VI) occurred at pH between 4.0 and 6.0. Kinetic studies showed that the adsorption generally obeyed a pseudo second-order model. The activation energy was 31.4?kJ?mol^?1, indicating that the adsorption process was governed mainly by interactions of physical nature. Furthermore, application of Langmuir and Freundlich isotherm models to the adsorption equilibrium data showed that the adsorption behavior obeyed the Langmuir model. The adsorption capacity was found to be 10.8?g Mo(VI)?kg^?1 adsorbent. Finally, thermodynamic parameters such as ΔH ⁰, ΔS ⁰, and ΔG ⁰ were also evaluated, which showed that the adsorption of Mo(VI) on the treated cinder was endothermic, entropy increasing, and spontaneous. In conclusion, the sulfuric acid-modified cinder was shown to be an inexpensive, effective, and simple adsorbent for the removal of Mo(VI) from water.