Choosing vehicle capacity to minimize risk for transporting flammable materials

Highway transportation of hazardous materials (hazmat) has been an active area of research with significant efforts in the risk assessment and route selection domains. Almost all these works assume fixed (constant) truck capacity, and hence capacity-based vehicle selection has not been studied. In this paper, we make a first attempt to investigate the impact of different truck capacities on transport risk from moving flammables, such as gasoline or explosives, on a given route. We make use of three scenarios, under risk-neutral and risk-averse assumptions, to develop conditions for preferring a specific vehicle size. A problem instance based in the US is solved to gain managerial insights.     

Removal of arsenic from groundwater by granular titanium dioxide adsorbent

A novel granular titanium dioxide (TiO2) was evaluated for the removal of arsenic from groundwater. Laboratory experiments were carried out to investigate the adsorption capacity of the adsorbent and the effect of anions on arsenic removal. Batch experimental results showed that more arsenate [As(V)] was adsorbed on TiO2 than arsenite [As(III)] in US groundwater at pH 7.0. The adsorption capacities for As(V) and As(III) were 41.4 and 32.4 mgg(-1) TiO2, respectively. However, the adsorbent had a similar adsorption capacity for As(V) and As(III) (approximately 40 mgg(-1)) when simulated Bangladesh groundwater was used. Silica (20 mgl(-1)) and phosphate (5.8 mgl(-1)) had no obvious effect on the removal of As(V) and As(III) by TiO2 at neutral pH. Point-of-entry (POE) filters containing 3 l of the granular adsorbent were tested for the removal of arsenic from groundwater in central New Jersey, USA. Groundwater was continuously passed through the filters at an empty bed contact time (EBCT) of 3 min. Approximately 45,000 bed volumes of groundwater containing an average of 39 microgl(-1) of As(V) was treated by the POE filter before the effluent arsenic concentration increased to 10 microgl(-1). The total treated water volumes per weight of adsorbent were about 60,000 l per 1 kg of adsorbent. The field filtration results demonstrated that the granular TiO2 adsorbent was very effective for the removal of arsenic in groundwater.     

Mutations for activity level in Drosophila jambulina perturbed its pacemaker that controls circadian eclosion rhythm

Mutations for activity level, designated hpa and hra, in Drosophila jambulina altered properties of the pacemaker controlling eclosion rhythm. Entrainment of eclosion rhythm was studied in light-dark (LD) cycles of 12:12 h at 28°C. The wild type strain entrained to LD cycles but the hpa or hra strain did not. When these strains were released from constant light (LL) to constant darkness (DD), the wild type strain free-ran while other two strains were arrhythmic. Temperature cycles entrained the wild type and hpa strain in DD and LL, and when transferred to constant temperature following thermoperiodic entrainment, the wild type strain free-ran in DD, while the hpa strain free-ran in LL as if the input of LL was essential for its free-running state. Temperature cycles entrained the hra strain in DD but not in LL, and free-running rhythmicities were never established, suggesting that the hra mutation has altered the basic properties of its pacemaker.     

Coal Combustion Product: Nonhazardous Material for Mine Fill

As is the case in many other countries around the world, India's main source of electricity is coal‐fired power plants. In addition to providing energy, the burning of coal also results in large amounts of coal combustion products (CCP), the incombustible material, such as fly ash, left after the coal is burned. These materials are produced in large volume, and if they are not managed or utilized properly, they can pose a danger to the environment. This article discusses the uses of CCP, with a special emphasis on fly ash, and the role that it is currently playing and can continue to play as a mine filler for India's depleted opencast and underground coal mines.     

Development of controlled release formulations of thiram employing amphiphilic polymers and their bioefficacy evaluation in seed quality enhancement studies

Controlled release formulations of Thiram (Dimethylcarbamothioylsulfanyl-N,N-dimethylcarbamodithioate), a contact fungicide, have been prepared using laboratory synthesized poly(ethylene glycol) (PEG) based functionalized amphiphilic copolymers. The kinetics of thiram from developed controlled release (CR) formulations were studied in comparison with that of the commercially available 75 WS. Release from the commercial formulation was faster than with the developed CR formulations. Maximum amount of thiram was released on 35th day for PEG-2000 4d, 28th day for PEG-1500 4c, 21st day for PEG-1000 4b and 15th day for PEG-600 4a in comparison to commercial formulation (7th day). The diffusion exponent (n) of thiram in water ranged from 0.356 to 0.545 in the tested formulations. The half-release (t_1/2) values ranged between 14.78 to 22.1 days, and the Period of Optimum Availability (POA) of thiram ranged from 7.79 to 25.15 days. An effort has also been made to identify the suitable polymers that could reduce the seed deterioration during storage and also act as an effective carrier of fungicide thiram. The results demonstrate that the seeds coated with the different formulations deteriorated at a slower pace as manifested in high germination percentage over control. Apart from the fungicidal effect of thiram, the polymers acted as barriers to moisture reducing the rate of seed deterioration and checked the degradation of thiram. The CR formulation 4d, with PEG 2000, was found to be most effective as seed coat.     

Environmental impacts associated with manufacturing of solar and wind power alternative energy systems

The Air Force Center for Engineering and the Environment (AFCEE) is performing Environmental Restoration Program Optimization (E‐RPO) at various United States Air Force (USAF) installations to evaluate existing remediation strategies and recommend actions to advance issues impacting the remediation program. As sustainability practices (including green and sustainable remediation [GSR]) increase at Air Force facilities and throughout the environmental industry, the use of alternative energy‐collection sources (i.e., solar photovoltaics [PV] and wind turbines) is likely to increase dramatically. Although PV and wind power systems exhibit a low environmental footprint during their use, there are potential human health and environmental impacts from the manufacturing and recycling processes. This article presents a summary of available information regarding the environmental impacts associated with life‐cycle assessments that include raw material extraction and refinement, product manufacturing, use, and postuse disposal for PV and wind turbines (i.e., cradle‐to‐grave impacts). © 2010 Wiley Periodicals, Inc.     

Current trends in diagnosis and treatment strategies of COVID-19 infection

Environmental Science and Pollution Research - Coronaviruses are terrifically precise and adapted towards specialized respiratory epithelial cells, observed in organ culture and human volunteers...     

Characteristics of carbonaceous aerosols derived from long-term high-resolution measurements at a high-altitude site in the central Himalayas: radiative forcing estimates and role of meteorology and biomass burning

Environmental Science and Pollution Research - Simultaneous observations (2014–2017) of organic carbon (OC) and elemental carbon (EC) are made over a high-altitude site (Nainital,...     

Statistical inferences from measured data on concentrations of naturally occurring radon,thoron, and decay products in Kumaun Himalayan belt

Environmental Science and Pollution Research - Regional averages of radon, thoron, and associated decay product concentration are reported to be higher than their respective global averages in...     

Assessment of deterioration in water quality from source to household storage in semi-urban settings of developing countries

This study has investigated the common risks associated with the water quality changes from the source to the consumer households and the associated disease burden in the piped water supplies. Samples from the source to the household storage from Nagpur City were collected and analysed for heavy metals, nutrient and microbial parameters. Sanitary risks were identified at the households during the socio-economic and sanitary survey. The water quality deterioration was the most at household storage around 30.3 % indicating that measures need to be taken to safeguard the water quality at the consumer level. Then, 31.2 % of the samples collected from public standposts and handpumps were positive for faecal contamination which implies that it is the weaker sections of the society who suffer the consequences of drinking unsafe water the most. On the basis of the laboratory results, risk analysis by surveying the WTPs, point-of-use behaviour at households and sanitary status at different socio-economic strata, the Water Safety Plan for Nagpur City was structured. The aim was to ensure that safe and improved water is reached to the individual household.