Organochlorine compounds in the Gulf of Bothnia: sediment and benthic species

Surface sediment, amphipods (Monoporeia affinis), isopods (Saduria entomon) and fourhorn sculpins (Oncocottus quadricornis) were collected at two coastal stations in the Gulf of Bothnia, one in the Bothnian Bay and the other in the Bothnian Sea. The objective was to study the concentrations, composition profiles, bioaccumulation features and spatial differences of organochlorine compounds such as hexachlorocyclohexanes (HCHs), DDTs, hexachlorobenzene (HCBz), chlordanes (CHLs), dieldrin, Mirex and polychlorinated biphenyls (PCBs). All groups of compounds were found in every sample investigated, with the exception of Mirex that was not detected in the sediment samples. The concentrations for e.g. PCBs and CHLs ranged from 700 to 2400 and 70 to 400 ng/g lipid in the specimens. For the corresponding sediments the results were 9.0-9.3 ng/g dw for PCBs and 0.54-0.57 ng/g dw for CHLs, respectively. Bioaccumulation differences between the species with regard to both degree of and type of compound were observed. The highest accumulation potential was found for the cyclodiene compounds including CHLs and Mirex in isopod. Finally, there were only small concentration and bioaccumulation differences between the two stations.     

The dispersion of 99Tc in the Nordic Seas and the Arctic Ocean: a comparison of model results and observations

The radionuclide (99)Tc had been discharged from the nuclear reprocessing facility in Sellafield (UK) into the Irish Sea in increased amounts in the 1990s. We compare the simulated dispersion of (99)Tc in surface water as calculated by a hydrodynamic model and an assessment box model with field-observations from 1996 to 1999 to study concentrations, pathways and travel times. The model results are consistent with the observations and show the typical pathway of dissolved radionuclides from the Irish Sea via the North Sea along the Norwegian Coast. Subsequently the contaminated water separates into three branches of which the two Arctic branches bear the potential for future monitoring of the signal in the next decades. The results of the hydrodynamic model indicate a large variability of surface concentrations in the West Spitsbergen Current which has implications for future monitoring strategies. According to the observed and simulated distributions we suggest an improved box model structure to better capture the pattern for concentrations at the surface.     

Board task performance: An exploration of micro‐ and macro‐level determinants of board effectiveness

This paper addresses recent calls to narrow the micro–macro gap in management research (Bamberger, 2008), by incorporating a macro‐level context variable (country) in exploring micro‐level determinants of board effectiveness. Following the integrated model proposed by Forbes and Milliken (1999), we identify three board processes as micro‐level determinants of board effectiveness. Specifically, we focus on effort norms, cognitive conflicts and the use of knowledge and skills as determinants of board control and advisory task performance. Further, we consider how two different institutional settings influence board tasks, and how the context moderates the relationship between processes and tasks. Our hypotheses are tested on a survey‐based dataset of 535 medium‐sized and large industrial firms in Italy and Norway, which are considered to substantially differ along legal and cultural dimensions. The findings show that: (i) Board processes have a larger potential than demographic variables to explain board task performance; (ii) board task performance differs significantly between boards operating in different contexts; and (iii) national context moderates the relationships between board processes and board task performance. Copyright © 2010 John Wiley & Sons, Ltd.     

Occupational and indoor air exposure to persistent organic pollutants: a review of passive sampling techniques and needs

Exposure to persistent organic pollutants (POPs) and related compounds such as PCBs, brominated flame retardants, organochlorine pesticides and PAHs is regarded as an important environmental risk factor for humans. Recently concerns about POPs resulted in the international protocol called the Stockholm Convention on POPs. Air quality standards (indoor, outdoor and occupational) for PAHs and other POPs will also be applied in the EU in the future. This will bring requirements for monitoring, to check for compliance and to reduce human exposures to POPs. This can occur from point sources and in various microenvironments, indoors, outdoors and in workplaces. Monitoring can be undertaken either by an active (pumped) method or using a passive (diffusive) air sampling (PAS) device. To date, PAS for POPs have mainly been used as integrating (long-term) samplers for ambient (outdoor) air. However, there are several reasons to develop PAS for monitoring of POPs in occupational and indoor environments. We discuss the potential advantages, limitations and developments needed, so that PAS can be used reliably and routinely indoors and in occupational settings for POPs.     

Institutional Constraints to Environmentally Sound Integrated Land Use and Transport Policies: Experiences from the Norwegian Integrated Land Use and Transport Planning Scheme

The Norwegian Integrated Land Use and Transport Planning Scheme TP10 was launched in 1991 as a responseto growing concern about the environmental effects of road transport in Norway's largest cities. Its main goal was to develop transport and land use policies leading to reductions in the growth of car use and transport demand. The purpose of this paper is to explain and discuss why the scheme on the whole failed to produce the intended policies. One reason was that the planning process in the scheme was dominated by the traditional transport planning and implementation authorities. The scheme was also linked to the national roads planning process in a way which diverted TP10 from its stated environmental goals. The paper concludes that radical changes in existing policies should be accompanied by institutional reform.     

Source identification for oil-based drill cuttings on the seabed based on stable carbon isotopes

This paper demonstrates how stable carbon isotopes can be utilized to identify the source of oil-based drill cuttings discharges and estimate the time of their deposition. The base-oil used in drilling mud systems may be biodegraded by seabed microflora. Effects of such processes make it difficult to identify sources of discharges based on the oil’s molecular structure. However, the stable isotope fingerprint of the base oil may vary for each batch of base-oil. Because carbon isotopic ratios in compounds with more than ten carbons are resistant to fractionation during biodegradation, this may be used as a tool to identify the source of drill cuttings discharges.     

The use of semipermeable membrane devices as passive samplers to determine persistent organic compounds in indoor air

In the study reported here semipermeable membrane devices (SPMDs) were used to sample 28 PAHs and 19 PCBs in the gas phase in 15 single-family houses located in an area where domestic wood burning is widespread. Eight of the households used wood burning appliances whereas the others used other systems for residential heating. Most of the studied compounds were found in the houses: the PAHs at levels that were similar to or slightly higher than published SPMD-sampled levels for background or urban sites in Sweden, and the PCBs at levels that were somewhat lower than those recently found in both indoor and outdoor urban locations. A principal component analysis revealed that wood-burning heating systems may contribute to PAHs in indoor air. The sources may be emissions indoors or penetration from outdoors. The convenience of SPMD technology facilitates its use for semi-quantitative screening and monitoring of various persistent organic compounds indoors in dwellings and working environments.     

Prenatal obstruction of the ileum diagnosed by ultrasound

A case of low atresia of the ileum, diagnosed prenatally by real-time ultrasound scanning, is presented. The ultrasound examination showed progressive distension of intestinal loops, with strong peristaltic movements. The stomach was also distended, presenting as a large cystic area in the upper left abdomen. Real-time ultrasound technique is most advantageous in the diagnosis of fetal ileus. Prenatal diagnosis of fetal intestinal obstruction is of great importance, making early and safe treatment of the newborn possible.     

Life cycle assessment of offset printed matter with EDIP97: how important are emissions of chemicals?

Existing product life cycle assessment (LCA) studies on offset printed matter all point at paper as the overall dominating cause of environmental impacts. All studies focus on energy consumption and the dominating role of paper is primarily based on the energy-related impact categories: global warming, acidification and nutrient enrichment. Ecotoxicity and human toxicity, which are related to emissions of chemicals, etc., are only included to a limited degree or not at all. In this paper we include the impacts from chemicals emitted during the life cycle of sheet fed offset printed matter. This is done by making use of some of the newest knowledge about emissions from the production at the printing industry combined with knowledge about the composition of the printing materials used. In cases with available data also upstream emissions from the production of printing materials are included. The results show that inclusion of the chemical emission-related impacts makes the EDIP97 impact profile of sheet fed offset products much more varied, as well for the normalised profiles as for the profiles weighted by distance to political environmental targets. Especially the ecotoxicity impact potential related to the production stage may contribute significantly, and the use of paper no longer becomes the overall dominating factor driving the environmental impacts.