Biodegradation and flushing of MBT wastes

Mechanical–biological treatment (MBT) processes are increasingly being adopted as a means of diverting biodegradable municipal waste (BMW) from landfill, for example to comply with the EU Landfill Directive. However, there is considerable uncertainty concerning the residual pollution potential of such wastes. This paper presents the results of laboratory experiments on two different MBT waste residues, carried out to investigate the remaining potential for the generation of greenhouse gases and the flushing of contaminants from these materials when landfilled. The potential for gas generation was found to be between 8% and 20% of that for raw MSW. Pretreatment of the waste reduced the potential for the release of organic carbon, ammoniacal nitrogen, and heavy metal contents into the leachate; and reduced the residual carbon remaining in the waste after final degradation from ～320 g/kg dry matter for raw MSW to between 183 and 195 g/kg dry matter for the MBT wastes.     

Response of antibiotics and resistance genes to high-intensity and low-intensity manure management

The purpose of this study was to determine the response of antibiotics and antibiotic resistance genes (ARG) to manure management. A pilot field study was conducted using horse manure containing no antibiotics, into which chlortetracycline (CTC), tylosin (TYL), and monensin (MON) were spiked and compared to unspiked controls. Subsequently, a large-scale field study was conducted comparing manure from a dairy with minimal use of antibiotics and a feedlot with regular subtherapeutic use of antibiotics. The manures were subjected to high-intensity management (HIM) (amending, watering, and turning) and low-intensity management (LIM) (no amending, watering, or turning) and were monitored for antibiotic concentrations and levels of tetracycline ARG [tet(W) and tet(O)] using quantitative real-time polymerase chain reaction. All three antibiotics in the pilot study dissipated more rapidly in HIM manure, with half-lives ranging from 4 to 15 d, compared to LIM manure, with half-lives ranging from 8 to 30 d. Levels of tet(W) were significantly higher after 141 d of treatment, but levels of tet(O) were significantly lower in all treatments. In the large-scale study, the feedlot manure had higher initial concentrations than the dairy manure of tetracycline (TC), oxytetracycline (OTC), and CTC as well as tet(W) and tet(O). Tetracycline and OTC dissipated more rapidly in HIM manure, with half-lives ranging from 6 to 15 d, compared to LIM manure, with half-lives ranging from 7 to 31 d. After 6 mo of treatment, tet(W) and tet(O) decreased significantly in feedlot manure, whereas dairy manure required only 4 mo of treatment for similar results.     

Experimental verification of ecological niche modeling in a heterogeneous environment

The current range of ecological habitats occupied by a species reflects a combination of the ecological tolerance of the species, dispersal limitation, and competition. Whether the current distribution of a species accurately reflects its niche has important consequences for the role of ecological niche modeling in predicting changes in species ranges as the result of biological invasions and climate change. We employed a detailed data set of species occurrence and spatial variation in biotic and abiotic attributes to model the niche of a native California annual plant, Collinsia sparsiflora. We tested the robustness of our model for both the realized and fundamental niche by planting seeds collected from four populations, representing two ecotypes, into plots that fully represented the five-dimensional niche space described by our model. The model successfully predicted which habitats allowed for C. sparsiflora persistence, but only for one of the two source ecotypes. Our results show that substantial niche divergence has occurred in our sample of four study populations, illustrating the importance of adequately sampling and describing within-species variation in niche modeling.     

Larval regulation of worker reproduction in the polydomous ant Novomessor cockerelli

The Science of Nature - Many insects use chemical defence mechanisms to defend themselves against predators. However, defensive secretions are costly to produce and should thus only be used in...     

INTEGRATING GEOGRAPHIC INFORMATION SYSTEMS AND MODFLOW FOR GROUND WATER RESOURCE ASSESSMENTS1

ABSTRACT: The Floridan Aquifer is the primary source of water in the coastal area of Santa Rosa County, Florida. In order to optimize well field design and analyze aquifer stress problems, the USGS MODFLOW code (McDonald and Harbaugh, 1988) is applied to develop a numerical computer model of the aquifer. The Geographical Information System (GIS) is the primary tool used in the development of the model grid, performance of the modeling procedure, and model analysis. The GIS is used in generating multiple grids in which to simulate both regional scale and local scale flow. The grid topology is recorded in geographic coordinates which facilitates geo-referencing and orientation of the grid to base maps and data coyerages. The GIS allows data transfer from various coverages to the nodes of the block centered grid where hydrogeologic information is stored as attributes to the grid coverage. From this grid coverage, pertinent information is queried within the GIS environment and used to generate the input files for the MODFLOW simulation. After MODFLOW execution, simulated heads and drawdown are imported into the grid coverage where residual error and recharge rates can be calculated. Contoured surfaces are then created for selected data sets including simulated heads, drawdown, residual error, and recharge rates. Model calibration is conducted utilizing the GIS to generate and process data sets associated with model simulations.