Particulate matter exchange between atmosphere and roads surfaces in urban areas

The deposition and the re-suspension of particulate matter (PM) in urban areas are the key processes that contribute not only to stormwater pollution, but also to air pollution. However, investigation of the deposition and the re-suspension of PM is challenging because of the difficulties in distinguishing between the resuspended and the deposited PM. This study created two Bayesian Networks (BN) models to explore the deposition and the re-suspension of PM as well as the important influential factors. The outcomes of BN modelling revealed that deposition and re-suspension of PM10 occurred under both, high-traffic and low-traffic conditions, and the re-suspension of PM2.5 occurred under low-traffic conditions. The deposition of PM10 under low-volume traffic condition is 1.6 times higher than under high-volume traffic condition, which is attributed to the decrease in PM10 caused by relatively higher turbulence under high-volume traffic conditions. PM10 is more easily resuspended from road surfaces compared to PM2.5 as the particles which larger than the thickness of the laminar airflow over the road surface are more easily removed from road surfaces. The increase in wind speed contributes to the increase in PM build-up by transporting particulates from roadside areas to the road surfaces and the airborne PM2.5 and PM10 increases with the increase in relative humidity. The study outcomes provide a step improvement in the understanding of the transfer processes of PM2.5 and PM10 between atmosphere and urban road surfaces, which in turn will contribute to the effective design of mitigation measures for urban stormwater and air pollution.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

Reviews of emission of biogenic volatile organic compounds (BVOCs) in Asia

Biogenic volatile organic compounds (BVOCs) in the atmosphere play important roles in the formation of ground-level ozone and secondary organic aerosol (SOA) in global scale and also in regional scale under some condition due to their large amount and relatively higher reactivity. In places with high plant cover in the tropics and in China where air pollution is serious, the effect of BVOCs on ozone and secondary organic aerosols is strong. The present research aims to provide a comprehensive review about the emission rate, emission inventory, research methods, the influencing factors of BVOCs emissions, as well as their impacts on atmospheric environment quality and human health in recent years in Asia based on the summary and analysis of literatures. It is suggested to use field direct measurement method to obtain the emission rate and model method to calculate the emission amount. Several recommendations are given for future investigation and policy development on BVOCs emission.     

京津冀城市群二氧化碳排放达峰研究

基于IPCC排放因子方法建立了2015—2019年京津冀城市群地级城市CO₂排放清单,基于经济增长与CO₂排放关系的脱钩系数法,得到京津冀城市群13个地级以上城市的脱钩情况,结合历史CO₂排放和脱钩情况提出的京津冀城市群达峰判别方法,对京津冀城市群地级以上城市CO₂排放达峰情况进行了判断。结果表明:近5年来,保定、张家口、秦皇岛、邢台、沧州、廊坊、衡水7市碳排放量暂未达到峰值状态;北京、天津、石家庄、承德、邯郸、唐山6个城市已经处于CO₂排放达峰状态。建议已经具备达峰条件的城市抓紧开展达峰行动方案,制定CO₂排放达峰目标。     

北京市典型汽修企业VOCs排放特征与臭氧影响分析

对北京地区27家汽修企业进行调研,选取2家典型汽修企业进行气袋采样-GC-MS-FID采集及分析,定量分析其VOCs的排放特征,并计算其臭氧生成潜势（OFP）。结果表明:使用不同漆料的汽修企业排放特征不同,水性漆企业非甲烷总烃的排放浓度为0.62~36.49 mg/m3,油性漆企业的排放浓度为0~100.39 mg/m3;水性漆排放的VOCs以烷烃为主,占比高达57.16%,丙烷（39.65%）和甲苯（11.41%）是首要污染物;卤代烃（55.51%）是油性漆企业的主要VOCs排放物种,主要组分为1,2-二氯丙烷和1,2-二氯乙烷;水性漆企业的OFP值为144.78 mg/m3,油性漆企业的OFP值为664.43 mg/m3,大气反应活性最大的物种多为芳香烃,芳香烃对OFP的贡献率分别为52.18%和88.44%。     

关于在长江经济带布局以水质改善为目标的流域生态缓冲体系的思考

生态缓冲带能够有效减缓流域内的人类活动或自然过程对水环境和水生态系统的影响.在长江经济带构建流域生态缓冲体系,对长江生态保护修复具有十分重要的意义.讨论了构建流域生态缓冲体系涉及的生态缓冲带位置选择、缓冲体系所占最低面积比率、宽度划定等一些基本的原则要求;利用卫星遥感影像数据,提取各汇水单元的地形特征、土地利用类型特征、土壤类型、土壤侵蚀强度、水文水系等数据,对长江经济带流域生态缓冲体系进行布局.结果表明:①长江经济带内林草地是主要土地利用类型,占区域总面积的62.46%,但是分布很不均匀,主要集中在西部高地和中下游的丘陵地带,在人口密集、农田密集的区域分布偏少;城镇用地主要集中在长江中下游地区.②土壤类型空间差异显著,浙江省、江苏省、湖南省、江西省及安徽省大部分区域的土壤多是黏性比较大,污染物迁移能力较低;而污染物迁移能力较强的砂质土或者土层较薄的山地草甸土主要分布在四川省北部、西北部.水力侵蚀、风力侵蚀和冻融侵蚀均有分布,且以水力侵蚀为主,建议在中度及以上侵蚀强度区域尽量减少污染源,重点布置缓冲带,增加该区域的缓冲力度.③长江经济带范围内可以利用的中小型湿地、小型河流支浜的面积至少有1.4×104 km2,再结合林草缓冲带,就可以形成一个生态缓冲体系.④在土地利用类型分布结果基础上,叠加土壤侵蚀强度和水系分布,将污染源区、中度及以上侵蚀强度区、水体区作为缓冲对象,建立缓冲体系的重点区域,总面积约14.26×104 km2,占长江经济带总面积的6.95%.对照欧美地区的研究,6.95%的缓冲体系面积占比是偏低的,需要在长江经济带开展深入研究来确定适宜的缓冲体系面积比,推进长江经济带流域生态缓冲体系的构建.      

烟花爆竹燃放对大气污染物及PM2.5组分影响

为了解烟花爆竹燃放对保定市大气污染物和PM_2.5中水溶性离子及有机碳（OC）、元素碳（EC）浓度的影响,对保定市春节期间大气污染物和颗粒物组分的浓度特征进行了分析,并评估了烟花爆竹的贡献.结果表明： 2019年春节期间烟花爆竹集中燃放期PM_2.5、PM₁₀、SO₂、NO₂、CO平均浓度比非集中燃放期分别增加了1.3、1.0、1.1、0.4、0.02倍;保定市春节期间禁燃措施施行后,除夕、初一2d污染物平均浓度、最高浓度和高浓度持续时间均明显下降,集中燃放期烟花爆竹燃放对PM_2.5、PM₁₀和SO₂浓度贡献量从50%左右（2018年、2017年）下降至30%左右（2019年）,其中SO₂贡献量下降幅度超过PM_2.5和PM₁₀;组分分析表明,接待中心站点（主城区）、涿州站点（区县建成区）烟花爆竹燃放期K⁺、Mg²⁺、Cl^-浓度在水溶性离子中的总占比分别为39.3%、51.1%,比非燃放期的占比显著上升;烟花爆竹燃放对PM_2.5中K⁺、Mg²⁺、Cl^-浓度贡献率在50%以上,其中对K⁺贡献占比高达89.0%,涿州站点SO₄^2-、K⁺、Mg²⁺、Cl^-的贡献量分别是接待中心站点的2.2、2.1、1.9、1.8倍,燃放期硫氧化率（SOR）、氮氧化率（NOR）相比于非燃放期均有一定程度的升高;集中燃放期OC、EC浓度较非集中燃放期分别升高了2.5、2.1倍,烟花爆竹燃放对OC影响大于EC.     

洪泽湖不同入湖河流沉积物磷形态特征及生物有效性

为揭示洪泽湖入湖河流沉积物磷形态空间差异性及影响因素,分析了洪泽湖自西北向西南7条入湖河流65个表层沉积物中不同磷（P）形态,并探讨了磷形态空间赋存特征的影响因素及环境意义.研究表明：沉积物总磷（TP）含量为488.90mg/kg~960.22mg/kg,无机磷（Pi）为主要形态,相对含量为65.81%~76.16%.西部入湖流域沉积物有机磷（Po）以非活性有机磷（NLOP）为主,汴河最高,相对含量约占Po的50.41%,生物有效态无机磷（BAP）相对含量最高,占Pi的66.84%,污染程度最高;西南和西北入湖流域Po则以中活性有机磷（MLOP）为主,Pi以钙结合态无机磷（HCl-Pi）为主.西北入湖流域由于受当地地质背景的影响,HCl-Pi所占Pi相对含量最高（43.02%）,从而减缓了磷的移动能力,污染程度最低.随着沉积物污染程度的增加,生物有效态Po含量增加,但所占Po相对含量降低;HCl-Pi含量增加,所占Pi相对含量降低,这一现象和我国其它典型地区沉积物磷形态空间分布类似.西部和西南入湖流域主要受水土流失、有机面源污染及藻类生长的影响,有机质环境较高,水交换能力弱,可被有机质降解的Po组分高于可被矿化的Po组分,大部分难降解Po组分易沉积,导致西部和西南入湖流域较高的BAP和NLOP含量,富营养化程度较高.沉积物OM是各形态磷之间相互转化的关键因素,和沉积物内源磷地球生物化学循环密切相关.洪泽湖入湖流域沉积物磷形态空间差异性主要由农业面源污染物的输入而导致内源磷负荷加剧.洪泽湖西部和西南入湖流域应重点控制农田水土流失及养殖业面源污染,建设滨岸修复带,遵循少量多次增施有机肥原则,减少农用地水土流失.健全农村养殖业废水废渣处理;划定科学养殖区;提倡铜围网箱,增加水体交换率.而对于洪泽湖西北入湖流域则应重点防止过度城镇化带来的水土流失及对生态功能保护区过高的污染负荷.     

融合Lamb-Jenkinson分型法和LSTM神经网络的PM2.5预测研究

文章采用NCEP/NCAR逐日海平面气压场资料,利用Lamb-Jenkinson环流分型法对张家口大气环流进行分型,分析环流型与PM_(2.5)质量浓度之间的关系,并针对PM_(2.5)浓度的预测,提出一种融合Lamb-Jenkinson环流分型和LSTM神经网络混合模型的方法,即以环流指数为预测因子基于LSTM方法搭建PM_(2.5)质量浓度的预测模型。结果表明:影响张家口地区的主要环流型有反气旋型、气旋型、偏北平直型、西南平直型、偏西平直型、东北平直型等、西北平直型、偏东平直型。PM_(2.5)污染日出现的主要环流型为南气旋平直型、东南平直型、偏南平直型、偏东气旋型、西南气旋平直型、偏东平直型、气旋型等,而反气旋型和反气旋式平直环流型不利于污染出现。张家口地区的PM_(2.5)污染与地面环流有着密切的联系,当存在PM_(2.5)污染时,张家口地区处于日本海高压后部的均压场区域,污染越严重,日本海高压中心强度越强。模型预测结果的均方根误差为9.88、平均绝对误差为5.84、拟合优度达0.80,表明该模型具有一定的预报能力。     

游离氯联合湿干比调控启动CRI系统短程硝化研究

短程硝化反硝化工艺为解决人工快渗(CRI)系统脱氮效率低的弊端提供了新思路,通过适宜的调控方法启动短程硝化是实现该工艺的关键。为此,考察了游离氯和湿干比对CRI系统内氮素污染物转化的影响,分析了不同阶段的菌群活性和结构特征,探究了游离氯联合湿干比调控启动CRI系统短程硝化的可行性。结果表明,连续添加3 mg/L游离氯23 d后NO2--N积累率稳定在70%左右,亚硝酸氧化菌(NOB)的活性将受到严重抑制且难以在短期内恢复。此时调节湿干比为1∶5,NH_4~+-N平均去除率、NO_2~--N平均积累率分别升高至97.41%、94.80%,成功启动短程硝化。16S rRNA高通量测序结果表明,CRI系统内氨氧化菌(AOB)的主要类型为Nitrosomonas、Nitrosovibrio,NOB的主要类型为Nitrospira。CRI系统短程硝化启动成功后,AOB的相对丰度由启动前的4.21%增加到6.69%,而NOB的相对丰度由4.34%降低到0.17%。因此,游离氯联合湿干比调控能选择性抑制NOB活性和促进AOB增殖,可为CRI系统启动短程硝化提供一种可行的新方法。