基于神经网络的温度预测

室内温度与诸多影响因素之间的非线性、复杂性等关系 ,给建模、预测带来了难度 ,引入了人工神经网络 ;利用人工神经网络的非线性、并行计算和自学习特性进行建模 ,实现了对温度模拟     

化学混凝法去除稠油废水中的硅

以新疆油田稠油废水为研究对象,采用化学混凝除硅方法对稠油废水进行处理。实验结果表明:采用锌复合混凝剂的混凝、软化及镁剂除硅相结合的方法具有较好的除硅效果。确定了最佳除硅配方:NaOH的加入量为500~600mg/L,除硅剂MgCl2.6H2O的加入量为700~800mg/L,锌复合混凝剂加入量为100~150mg/L,处理后废水中SiO2的质量浓度小于50mg/L,达到热采锅炉的用水标准。     

Effects of Acid Rain on Competitive Releases of Cd, Cu, and Zn from Two Natural Soils and Two Contaminated Soils in Hunan, China

Leaching experiments of rebuilt soil columns with two simulated acid rain solutions (pH 4.6–3.8) were conducted for two natural soils and two artificial contaminated soils from Hunan, south-central China, to study effects of acid rain on competitive releases of soil Cd, Cu, and Zn. Distilled water was used in comparison. The results showed that the total releases were Zn>Cu>Cd for the natural soils and Cd>Zn≫Cu for the contaminated soils, which reflected sensitivity of these metals to acid rain. Leached with different acid rain, about 26–76% of external Cd and 11–68% external Zn were released, but more than 99% of external Cu was adsorbed by the soils, and therefore Cu had a different sorption and desorption pattern from Cd and Zn. Metal releases were obviously correlated with releases of TOC in the leachates, which could be described as an exponential equation. Compared with the natural soils, acid rain not only led to changes in total metal contents, but also in metal fraction distributions in the contaminated soils. More acidified soils had a lower sorption capacity to metals, mostly related to soil properties such as pH, organic matter, soil particles, adsorbed SO₄ ²⁻, exchangeable Al³⁺ and H⁺, and contents of Fe₂O₃ and Al₂O₃.     

圆柱体相似试件的拉裂破坏模型研究

首先简单介绍了单轴压缩试验的具体情况。对于拉裂破坏模式,提出了相应的力学计算模型,并建立了抗压强度和抗拉强度的关系式。对于由拉裂面的存在而导致试件最终破坏的计算模型,提出了4种相应的假设。其中,对4种特征的拉裂面建立了抗压强度和抗拉强度的关系式。     

萍乡市农用土壤重金属含量及其分布特征分析

以江西省萍乡地区农用土壤为研究对象,分析研究了萍乡市农用土壤中重金属的含量、分布特征。结果表明:萍乡地区农用土壤中重金属的平均含量均未超过国家土壤环境质量二级标准,但其中锌、镍、铬、铜、镉、砷、铅、锰、汞的含量均超过了江西省土壤重金属相应元素的背景值。从空间分布来看,在全市5个县区布置的29个测点中,有14个测点的重金属含量超标;其中上栗县有8个测点超标,明显多于其他县区,出现了不同的污染特征。     

Research on transesterification parameters for producing plant sterols with supercritical methanol

The supercritical fluid method, regarded as a type of individual production process in the course of preparing plant sterols, has become a promising technology, which possesses advantages of high conversion rate without any pretreatment and need of a catalyst. This study examined the reaction process of the deodorizer distillate (DOD), which mainly included the direct transesterification of DOD to convert into free sterols. The effects of the ratio of methanol to DOD, reaction temperature and time on transesterification were studied. Furthermore, the interactions between different factors were also assessed using the response surface methodology. The optimal conditions obtained were as follows: reaction temperature 553 K, reaction time 80 min, and CH₃OH: DOD = 25:1 (mass ratio). Under these conditions, 36.42% sterol concentration was obtained, which is significantly higher in comparison with the initial sterols’ concentration in raw material (22.45%).     

基于Matlab分析的台阶式场地平整方案优化设计

在某市餐厨垃圾处理厂场地平整设计中,利用Matlab软件对台阶式场地平整方案进行优化设计,即在Auto CAD环境下用等高线法计算各级台阶的土方量,用Matlab软件拟合出台阶设计高程和土方量的函数关系式,在约束条件下求解,得到了最优设计高程和基于土方挖填平衡条件下场地平整的最小土方工程量,为工程总平面布置提供优化方案。其分析设计方法可为工业企业台阶式场地的总平面布置设计提供借鉴。     

Investigation of carbonyl compound sources at a rural site in the Yangtze River Delta region of China

Carbonyl compounds are important intermediates in atmospheric photochemistry, but their primary sources are still not understood well. In this work, carbonyls, hydrocarbons, and alkyl nitrates were continuously measured during November 2011 at a rural site in the Yangtze River Delta region of China. Mixing ratios of carbonyls and hydrocarbons showed large fluctuations during the entire measurement. The average level for total measured volatile organic compounds during the pollution episode from 25th to 27th November, 2011 was 91.6 ppb, about 7 times the value for the clean period of 7th-8th, November, 2011. To preliminarily identify toluene sources at this site, the emission ratio of toluene to benzene (T/B) during the pollution episode was determined based on photochemical ages derived from the relationship of alkyl nitrates to their parent alkanes. The calculated T/B was 5.8 ppb/ppb, significantly higher than the values of 0.2-1.7 ppb/ppb for vehicular exhaust and other combustion sources, indicating the dominant influence of industrial emissions on ambient toluene. The contributions of industrial sources to ambient carbonyls were then calculated using a multiple linear regression fit model that used toluene and alkyl nitrates as respective tracers for industrial emission and secondary production. During the pollution episode, 18.5%, 69.0%, and 52.9% of measured formaldehyde, acetaldehyde, and acetone were considered to be attributable to industrial emissions. The emission ratios relative to toluene for formaldehyde, acetaldehyde, and acetone were determined to be 0.10, 0.20 and 0.40 ppb/ppb, respectively. More research on industrial carbonyl emission characteristics is needed to understand carbonyl sources better.