我国典型南方城市臭氧污染特征

分析了我国典型南方城市的臭氧污染特征,选取我国4个有代表性的南方重点城市武汉、宁波、中山和南宁的2013—2015年监测数据,使用EXCEL、ORIGIN和MATLAB等统计软件开展研究,结果表明:我国南方典型城市的臭氧质量浓度分布有明显时间变化特征,超标时间跨度大,部分南方城市与氮氧化物存在较明显负相关性,相关系数高于-0.6;受城市所在不同地理位置、气象因素、大气扩散条件及可能的不同本地排放污染源构成等因素影响,4个城市的近3年臭氧浓度月均值、超标情况和年内峰值均存在一定差异和分组相似性;与部分气象因素也表现出显著相关性。     

Heavy metal contamination in a vulnerable mangrove swamp in South China

Concentrations of six heavy metals (Cu, Ni, Zn, Cd, Cr, and Pb) in sediments and fine roots, thick roots, branches, and leaves of six mangrove plant species collected from the Futian mangrove forest, South China were measured. The results show that both the sediments and plants in Futian mangrove ecosystem are moderately contaminated by heavy metals, with the main contaminants being Zn and Cu. All investigated metals showed very similar distribution patterns in the sediments, implying that they had the same anthropogenic source(s). High accumulations of the heavy metals were observed in the root tissues, especially the fine roots, and much lower concentrations in the other organs. This indicates that the roots strongly immobilize the heavy metals and (hence) that mangrove plants possess mechanisms that limit the upward transport of heavy metals and exclude them from sensitive tissues. The growth performance of propagules and 6-month-old seedlings of Bruguiera gymnorhiza in the presence of contaminating Cu and Cd was also examined. The results show that this plant is not sufficiently sensitive to heavy metals after its propagule stage for its regeneration and growth to be significantly affected by heavy metal contamination in the Futian mangrove ecosystem. However, older mangrove seedlings appeared to be more metal-tolerant than the younger seedlings due to their more efficient exclusion mechanism. Thus, the effects of metal contamination on young seedlings should be assessed when evaluating the risks posed by heavy metals in an ecosystem.     

区域环境风险评估研究进展

简述了区域环境风险及区域环境风险评估的内涵,以及国内外区域环境风险评估研究发展进程及现状,指出了现阶段区域环境风险评估存在的问题,提出应重点开展区域环境风险发生机理、定量表征区域环境风险方法等研究的展望。     

Utilization of coal fly ash in China: a mini-review on challenges and future directions

Environmental Science and Pollution Research - The rapid economic development in China places a large demand for energy, and as a result, thermal power plants in China are producing an enormous...     

Polystyrene nanoplastics affect growth and microcystin production of Microcystis aeruginosa

Nanoplastics are widely distributed in freshwater environments, but few studies have addressed their effects on freshwater algae, especially on harmful algae. In this study, the effects of polystyrene (PS) nanoplastics on Microcystis aeruginosa (M. aeruginosa) growth, as well as microcystin (MC) production and release, were investigated over the whole growth period. The results show that PS nanoplastics caused a dose-dependent inhibitory effect on M. aeruginosa growth and a dose-dependent increase in the aggregation rate peaking at 60.16% and 46.34%, respectively, when the PS nanoplastic concentration was 100 mg/L. This caused significant growth of M. aeruginosa with a specific growth rate up to 0.41 d^?1 (50 mg/L PS nanoplastics). After a brief period of rapid growth, the tested algal cells steadily grew. In addition, the increase in PS nanoplastics concentration promoted the production and release of MC. When the PS nanoplastic concentration was 100 mg/L, the content of the intracellular (intra-) and extracellular (extra-) MC increased to 199.1 and 166.5 μg/L, respectively, on day 26, which was 31.4% and 31.1% higher, respectively, than the control. Our results provide insights into the action mechanism of nanoplastics on harmful algae and the potential risks to freshwater environments.

     

Development of highly efficient and reusable magnetic nitrogen-doped carbon nanotubes for chlorophenol removal

Environmental Science and Pollution Research - Nitrogen-doped carbon nanotubes (N-CNTs) were synthesized via a hydrothermal method and further modified with magnetic Co0.5Cu0.5Fe2O4 nanoparticles...     

Polycyclic aromatic hydrocarbon and n-alkane pollution characteristics and structural and functional perturbations to the microbial community: a case-study of historically petroleum-contaminated soil

Characterization of the typical petroleum pollutants, polycyclic aromatic hydrocarbons (PAHs) and n-alkanes, and indigenous microbial community structure and function in historically contaminated soil at petrol stations is critical. Five soil samples were collected from a petrol station in Beijing, China. The concentrations of 16 PAHs and 31 n-alkanes were measured by gas chromatography-mass spectrometry. The total concentrations of PAHs and n-alkanes ranged from 973 ± 55 to 2667 ± 183 μg/kg and 6.40 ± 0.38 to 8.65 ± 0.59 mg/kg (dry weight), respectively, which increased with depth. According to the observed molecular indices, PAHs and n-alkanes originated mostly from petroleum-related sources. The levels of ΣPAHs and the total toxic benzo[a]pyrene equivalent (ranging from 6.41 to 72.54 μg/kg) might exert adverse biological effects. Shotgun metagenomic sequencing was employed to investigate the indigenous microbial community structure and function. The results revealed that Proteobacteria and Actinobacteria were the most abundant phyla, and Nocardioides and Microbacterium were the important genera. Based on COG and KEGG annotations, the highly abundant functional classes were identified, and these functions were involved in allowing microorganisms to adapt to the pressure from contaminants. Five petroleum hydrocarbon degradation-related genes were annotated, revealing the distribution of degrading microorganisms. This work facilitates the understanding of the composition, source, and potential ecological impacts of residual PAHs and n-alkanes in historically contaminated soil.

     

Performance and microbial community of a membrane bioreactor system——Treating wastewater from ethanol fermentation of food waste

In this study, a lab-scale biological anaerobic/anaerobic/anoxic/membrane bioreactor(A_-~3MBR) was designed to treat wastewater from the ethanol fermentation of food waste,a promising way for the disposal of food waste and reclamation of resources. The 454 pyrosequencing technique was used to investigate the composition of the microbial community in the treatment system. The system yielded a stable effluent concentration of chemical oxygen demand(202 ± 23 mg/L), total nitrogen(62.1 ± 7.1 mg/L), ammonia(0.3 ±0.13 mg/L) and total phosphorus(8.3 ± 0.9 mg/L), and the reactors played different roles in specific pollutant removal. The exploration of the microbial community in the system revealed that:(1) the microbial diversity of anaerobic reactors A_1 and A_2, in which organic pollutants were massively degraded, was much higher than that in anoxic A_3 and aerobic MBR;(2) although the community composition in each reactor was quite different, bacteria assigned to the classes Clostridia, Bacteroidia, and Synergistia were important and common microorganisms for organic pollutant degradation in the anaerobic units, and bacteria from Alphaproteobacteria and Betaproteobacteria were the dominant microbial population in A_3 and MBR;(3) the taxon identification indicated that Arcobacter in the anaerobic reactors and Thauera in the anoxic reactor were two representative genera in the biological process. Our results proved that the biological A_-~3MBR process is an alternative technique for treating wastewater from food waste.     

一种多介质层波形潜流人工湿地处理重污染河水试验

我国河流污染严重,城市黑臭水体的比率日益增加。人工湿地作为一种高效低耗能的绿色处理技术,已被广泛应用于污染河水的治理。通过对比分析分层装填复合填料的多介质层波形潜流人工湿地和单一砾石填料的普通人工湿地处理重污染河水的效果,研究了特种基质填料强化脱氮除磷作用以及不同水力负荷条件的影响。试验结果表明:在水力负荷为0.2 m~3/(m~2·d)时,普通湿地对COD、NH3-N、TN和TP的去除率分别达到55.95%、77.85%、39.80%和54.94%;多介质层湿地对COD、NH3-N、TN和TP的去除率分别达到58.52%、75.99%、67.08%和57.31%。在水力负荷为0.5 m~3/(m~2·d)时,普通湿地对COD、NH3-N、TN和TP的去除率分别达到68.46%、90.73%、42.13%和53.70%;多介质层湿地对COD、NH3-N、TN和TP的去除率分别达到69.61%、89.94%、77.58%和68.63%,其脱氮效果明显好于普通湿地。以复合填料包分层装填的波形潜流人工湿地系统具有良好的脱氮除磷效果,有很好的推广应用价值。     

Distribution characteristics of poly- and perfluoroalkyl substances in the Yangtze River Delta

In this work, a method was developed and optimized for the analysis of polyfluoroalkyl and/or perfluoroalkyl substances(PFASs) content in surface water and sediment samples with high instrumental response and good separation. Surface water and sediment samples were collected from the Yangtze River Delta(YRD) to analyze the distribution characteristics of perfluoroalkyl carboxylic acids(PFCAs), perfluoroalkane sulfonic acids(PFSAs), perfluoroalkyl phosphonic acids(PFPAs), perfluoroalkyl phosphinic acids(PFPiAs), and polyfluoroalkyl phosphoric acid diesters(di PAPs). The results showed that the total concentrations of PFCAs and PFSAs in YRD varied from 31 to 902 ng/L. PFCAs(≥ 11 carbons) and PFSAs(≥ 10 carbons atoms) were not detected in any surface water samples. The mean concentrations of all PFCAs and PFSAs in surface water from the sampling areas decreased in the following order:Yangtze river(191 ng/L) ≈ Taihu lake(189 ng/L) Huangpu river(122 ng/L) ≈ Qiantang river(120 ng/L) Jiaxing urban river(100 ng/L). Strong significant(p 0.05) correlations between the concentrations of many of the compounds were found in the sampling areas, suggesting a common source for these compounds. Only perfluorooctanoic acid(PFOA) was observed in all sediment samples, at concentrations varying from 0.02 to 1.35 ng/g. Finally, detection rates of two di PAPs were only 8% and 10%, respectively and the concentration of di PAPs was two to three times lower compared to PFCAs and PFSAs.