Effect of salicylic acid on morphological and biochemical attributes in cowpea

Effects of salicylic acid (SA) on seed germination, seedling growth, flowering and biochemical activities were studied out in four cowpea (Vigna unguiculata) genotypes in control environments. The results revealed that both germination and seedling growth were negatively affected by 0.02%. SA application, however did not affect the size of full expanded buds, time of 50% flowering and date of flower initiation. A maximum increase in peroxidase (EC1.11.1.7) activity was observed in UPC 4200 over other genotypes. No significant change in the content of total soluble and intercellular fluid proteins was observed except in UPC 4200 genotype. SA induced accumulation of total soluble sugars more at flowering stage than at seed setting stage. It is evident from the present study that UPC 4200 genotype was more responsive to salicylic acid both in terms of increased peroxidase activity and less negative effect on morphological attributes, thus suggesting its wider use without negative impact on environment as salicylic acid has been reported in plants.     

Utilization of agricultural waste biomass and recycling toward circular bioeconomy

Environmental Science and Pollution Research - The major global concern on energy is focused on conventional fossil resources. The burning of fossil fuels is an origin of greenhouse gas emissions...     

MODIS derived fire characteristics and aerosol optical depth variations during the agricultural residue burning season, north India

Agricultural residue burning is one of the major causes of greenhouse gas emissions and aerosols in the Indo-Ganges region. In this study, we characterize the fire intensity, seasonality, variability, fire radiative energy (FRE) and aerosol optical depth (AOD) variations during the agricultural residue burning season using MODIS data. Fire counts exhibited significant bi-modal activity, with peak occurrences during April-May and October-November corresponding to wheat and rice residue burning episodes. The FRE variations coincided with the amount of residues burnt. The mean AOD (2003-2008) was 0.60 with 0.87 (+1σ) and 0.32 (−1σ). The increased AOD during the winter coincided well with the fire counts during rice residue burning season. In contrast, the AOD-fire signal was weak during the summer wheat residue burning and attributed to dust and fossil fuel combustion. Our results highlight the need for ‘full accounting of GHG’s and aerosols’, for addressing the air quality in the study area.     

A Study of Dynamic Mechanical and Thermal Behavior of Starch/Poly(vinylalcohol) Based Films

Starch/Poly(vinylalcohol) blends in two different ratios (60:40 and 50:50) were prepared with glycerol as a plasticizer. Films were cast by a solution casting method. One set of films were filled with 10 wt% of bentonite clay and another set of films were crosslinked with epichlorohydrin in an alkaline medium. The prepared film samples were characterized with dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA). The presence of clay and crosslinking with epichlorohydrin was found to have considerable effect on the dynamic mechanical properties and thermal stability of the films. Intercomponent H-bonding between starch, Poly(vinylalcohol) and glycerol enhanced the thermal stability of the films. But incorporation of clay and crosslinking with epichlorohydrin enhanced the steric crowding and lowered the thermal stability of the films.     

Assessing links between crop diversity and food self-sufficiency in three agroecological regions of Nepal

Increasing on-farm crop diversity is one agroecological approach to enhancing food self-sufficiency that helps small-scale farmers keep their food systems stable by reducing risks associated with stressors, such as a pest outbreaks or droughts. But understanding how crop diversity and food self-sufficiency are related is unknown. To explore this complex relation, this study presents household data (n = 1664) from Nepal to test the hypothesis that families with high crop diversity enjoy greater household food self-sufficiency. Data are presented for three districts that are representative of three distinct agroecological regions of the country: (1) Sarlahi, which is affluent, market-oriented, and on the plains; (2) Makwanpur District in the hills, which has well-developed integrated farm production; and (3) the mountainous District of Humla, which has the poorest quality environment and is the most remote. Results show that in the Humla District, families with greater crop diversity were more self-sufficient. In contrast, farmers in Makwanpur, who have already established a high degree of crop diversity based on vegetable production, do not benefit from additional crop diversity in terms of their ability to provide for themselves. Finally, data from Sarlahi show that families’ food self-sufficiency benefits from crop diversification. We conclude that boosting crop diversity is a viable strategy for maintaining stability in food systems, but this varies depending on the accessibility of a farm and, in particular, access to markets.     

Removal of cyanotoxins from surface water resources using reusable molecularly imprinted polymer adsorbents

Introduction

Microcystins (MCs; cyclic heptapeptides) are produced by freshwater cyanobacteria and cause public health concern in potable water supplies. There are more than 60 types of MCs identified to date, of which MC-LR is the most common found worldwide. For MC-LR, the WHO has established a threshold value of 1???g?L^?1 for drinking water. The present MCs removal methods such as coagulation, flocculation, adsorption, and filtration showed low efficiency for removing dissolved MC fraction from surface waters to the stipulated limit prescribed by WHO based on MC health impacts. The search for cost-effective and efficient removal method is still warranted for remediation of dissolved MC-LR-contaminated water resources.

Materials and methods

Molecularly imprinted polymer (MIP) adsorbent has been prepared using non-covalent imprinting approach. Using MC-LR as a template, itaconic acid as a functional monomer, and ethylene glycol dimethacrylate as a cross-linking monomer, a MIP has been synthesized. Computer simulations were used to design effective binding sites for MC-LR binding in aqueous solutions. Batch binding adsorption assay was followed to determine binding capacity of MIP under the influence of environmental parameters such as total dissolved solids and pH.

Results and discussion

The adsorptive removal of MC-LR from lake water has been investigated using MIPs. The MIP showed excellent adsorption potential toward MC-LR in aqueous solutions with a binding capacity of 3.64???g?mg^?1 which is about 60% and 70% more than the commercially used powdered activated carbon (PAC) and resin XAD, respectively. Environmental parameters such as total organic carbon (represented as chemical oxygen demand (COD)) and total dissolved solids (TDS) showed no significant interference up to 300?mg?L^?1 for MC-LR removal from lake water samples. It was found that the binding sites on PAC and XAD have more affinity toward COD and TDS than the MC-LR. Further, the adsorption capacity of the MIP was evaluated rigorously by its repeated contact with fresh lake water, and it was found that the adsorption capacity of the MIP did not change even after seven adsorption/desorption cycles. The contaminated water of MC-LR (1.0???g?L^?1) of 3,640?L could be treated by 1?g of MIP with an estimated cost of US $1.5.

Conclusions

The adsorption capacity of the MIP is 40% more than commercially used PAC and resins and also the polymer showed reusable potential which is one of the important criteria in selection of cyanotoxins remediation methods.     

Assessing suitability of apple cultivation under climate change in mountainous regions of western Nepal

Mustang, a mountainous region in the Kali Gandaki River Basin in western Nepal, has been increasingly experiencing climatic changes (e.g., higher temperatures). Rising temperatures lead to ecological shifts, which, in turn, can lead to the expansion of the lower limit for the cultivation of apple trees in this area. Apple cultivation can provide opportunities for adaptations under climate change through vulnerability reduction, income source diversification, livelihood improvement, and capacity building for farmers. As there is a lack of a strong basis to justify the expansion of apple cultivation in Mustang, this study examines the biophysical and socioeconomic suitability of apple cultivation in the area. Necessary data and information were collected from both primary and secondary sources. Findings of biophysical suitability using variable and equal weights to the indicators showed that 5.2 and 4.1 % of the areas are highly suitable for apple cultivation, respectively. However, not all potential farming areas are currently in use. Thus, there is the possibility to expand apple cultivation into unplanted areas and to integrate apple crops with other crops on cultivated lands. Increasing temperature may increase the suitable areas for the cultivation of apples in the coming years. High, benefit–cost ratio for land use confirmed the economic suitability of apple farming when compared to other land uses. The social suitability assessment showed no social discords, conflicts, or disagreements with apple cultivation, which is a positive indicator for the expansion of apple cultivation in western Nepal.     

The Sensitivity of PM25 Source-Receptor Relationships to Atmospheric Chemistry and Transport in a Three-Dimensional Air Quality Model

ABSTRACT

Air quality model simulations constitute an effective approach to developing source-receptor relationships (so-called transfer coefficients in the risk analysis framework) because a significant fraction of particulate matter (particularly PM_2.5) is secondary (i.e., formed in the atmosphere) and, therefore, depends on the atmospheric chemistry of the airshed. In this study, we have used a comprehensive three-dimensional air quality model for PM_{2 5} (SAQM-AERO) to compare three approaches to generating episodic transfer coefficients for several source regions in the Los Angeles Basin. First, transfer coefficients were developed by conducting PM_2.5 SAQM-AERO simulations with reduced emissions of one of four precursors (i.e., primary PM, sulfur dioxide (SO₂), oxides of nitrogen (NO_x), and volatile organic compounds) from each source region. Next, we calculated transfer coefficients using two other methods: (1) a simplified chemistry for PM_2.5 formation, and (2) simplifying assumptions on transport using information limited to basin-wide emission reductions. Transfer coefficients obtained with the simplified chemistry were similar to those obtained with the comprehensive model for VOC emission changes but differed for NO and SO emission changes. The differences were due to the parameterization of the rates of secondary PM formation in the simplified chemistry. In 90% of the cases, transfer coefficients estimated using only basin-wide information were within a factor of two of those obtained with the explicit source-receptor simulations conducted with the comprehensive model. The best agreement was obtained for VOC emission changes; poor agreement was obtained for primary PM_2.5.     

Dissipation kinetics of spiromesifen on tea (Camellia sinensis) under tropical conditions

Spiromesifen (Oberon) is a new insecticide and miticide of chemical class ketoenol active against white flies (Bemisia spp., Trialeuroides spp.) and spider mites (Tetranychus and Panonychus spp.). Due to its potential significance in insect resistance management, it is important to establish its behaviour on crop and environment. In the present study, the degradation/dissipation of spiromesifen on tea crop under tropical environmental conditions was studied and its DT(50) (t(1/2)), and DT(90) (time to reduce to 90% of the initial value) were estimated. Spiromesifen was sprayed on tea crop after first rain flush at four different locations @ 96 and 192ga.i.ha(-1). Samples of tea leaves were drawn at 0, 1, 3, 5, 7, 10, 15, 21 and 30 days after treatment and that of soil at 10 days after treatment and at harvest from 0 to 15 and 15 to 30cm layers. After crude extraction of tea leaves for spiromesifen residues with acetone:water, the contents were partitioned with cyclohexane:ethyl acetate and cleaned up on Florosil column. Soil residues were also extracted similarly. Quantification of residues was done on GC-MS in Selected Ion Monitoring (SIM) mode in mass range 271-274m/z. The LOQ of this method was found to be 0.05microgg(-1) while LOD being 0.015microgg(-1). The DT(50) of spiromesifen when applied at recommended doses in tea leaves was found to be 5.0-8.5 days. Ninety-nine percent degradation was found to occur within 33-57 days after application. In soil, no residues of spiromesifen were detectable 10 days after treatment.