Dissolved methane in Indian freshwater reservoirs

Emission of methane (CH₄), a potent greenhouse gas, from tropical reservoirs is of interest because such reservoirs experience conducive conditions for CH₄ production through anaerobic microbial activities. It has been suggested that Indian reservoirs have the potential to emit as much as 33.5 MT of CH₄ per annum to the atmosphere. However, this estimate is based on assumptions rather than actual measurements. We present here the first data on dissolved CH₄ concentrations from eight freshwater reservoirs in India, most of which experience seasonal anaerobic conditions and CH₄ buildup in the hypolimnia. However, strong stratification prevents the CH₄-rich subsurface layers to ventilate CH₄ directly to the atmosphere, and surface water CH₄ concentrations in these reservoirs are generally quite low (0.0028–0.305 μM). Moreover, only in two small reservoirs substantial CH₄ accumulation occurred at depths shallower than the level where water is used for power generation and irrigation, and in the only case where measurements were made in the outflowing water, CH₄ concentrations were quite low. In conjunction with short periods of CH₄ accumulation and generally lower concentrations than previously assumed, our study implies that CH₄ emission from Indian reservoirs has been greatly overestimated.     

Surface ozone-temperature relationships in the eastern US: A monthly climatology for evaluating chemistry-climate models

We use long-term, coincident O₃ and temperature measurements at the regionally representative US Environmental Protection Agency Clean Air Status and Trends Network (CASTNet) over the eastern US from 1988 through 2009 to characterize the surface O₃ response to year-to-year fluctuations in weather, for the purpose of evaluating global chemistry-climate models. We first produce a monthly climatology for each site over all available years, defined as the slope of the best-fit line (m_O3-T) between monthly average values of maximum daily 8-hour average (MDA8) O₃ and monthly average values of daily maximum surface temperature (T_max). Applying two distinct statistical approaches to aggregate the site-specific measurements to the regional scale, we find that summer time m_O3-T is 3–6 ppb K^?1 (r = 0.5–0.8) over the Northeast, 3–4 ppb K^?1 (r = 0.5–0.9) over the Great Lakes, and 3–6 ppb K^?1 (r = 0.2–0.8) over the Mid-Atlantic. The Geophysical Fluid Dynamics Laboratory (GFDL) Atmospheric Model version 3 (AM3) global chemistry-climate model generally captures the seasonal variations in correlation coefficients and m_O3-T despite biases in both monthly mean summertime MDA8 O₃ (up to +10 to +30 ppb) and daily T_max (up to +5 K) over the eastern US. During summer, GFDL AM3 reproduces m_O3-T over the Northeast (m_O3-T = 2–6 ppb K^?1; r = 0.6–0.9), but underestimates m_O3-T by 4 ppb K^?1 over the Mid-Atlantic, in part due to excessively warm temperatures above which O₃ production saturates in the model. Combining T_max biases in GFDL AM3 with an observation-based m_O3-T estimate of 3 ppb K^?1implies that temperature biases could explain up to 5–15 ppb of the MDA8 O₃ bias in August and September though correcting for excessively cool temperatures would worsen the O₃ bias in June. We underscore the need for long-term, coincident measurements of air pollution and meteorological variables to develop process-level constraints for evaluating chemistry-climate models used to project air quality responses to climate change.     

Urinary dialkyl phosphate levels before and after first season chlorpyrifos spraying amongst farm workers in the Western Cape,South Africa

The study investigated urinary levels of dialkyl phosphates resulting from pesticide exposure amongst 40 farm workers. Workers were tested (urinary dialkyl phosphate levels, anthropometry, short exposure questionnaire) before and after the first day of seasonal chlorpyrifos spraying. Median baseline urinary dialkyl phosphates was high amongst both non-applicators (1587.5 μg/g creatinine, n = 8) and applicators (365.6 μg/g creatinine, n = 9). There was not much evidence of an increase in post-spray dialkyl phosphates levels from pre-spray levels amongst both applicators and non-applicators. Hours mixing, spraying, driving a tractor and hours worked by non-applicators were not significantly associated with an increase in post-spray dialkyl phosphate levels, adjusting for age, height, weight, gender, use of empty pesticide containers and self-reported kidney problems. Past applicator status was weakly positively associated with pre-spray dialkyl phosphate levels adjusting for age, height, weight, and gender, self-reported kidney problems, smoking and alcohol (β= 1019.5, p = 0.307, R²= 0.28). The high dialkyl phosphate levels call for an epidemiological investigation into the health effects of organophosphorous pesticides.     

Influence of Geoengineered Climate on the Terrestrial Biosphere

Various geoengineering schemes have been proposed to counteract anthropogenically induced climate change. In a previous study, it was suggested that a 1.8% reduction in solar radiation incident on the Earths surface could noticeably reduce regional and seasonal climate change from increased atmospheric carbon dioxide (CO₂). However, the response of the terrestrial biosphere to reduced solar radiation in a CO₂-rich climate was not investigated. In this study, we hypothesized that a reduction in incident solar radiation in a Doubled CO₂ atmosphere will diminish the net primary productivity (NPP) of terrestrial ecosystems, potentially accelerating the accumulation of CO₂ in the atmosphere. We used a dynamic global ecosystem model, the Integrated Biosphere Simulator (IBIS), to investigate this hypothesis in an unperturbed climatology. While this simplified modeling framework effectively separated the influence of CO₂ and sunlight on the terrestrial biosphere, it did not consider the complex feedbacks within the Earths climate system. Our analysis indicated that compared to a Doubled CO₂ scenario, reduction in incident solar radiation by 1.8% in a double CO₂ world will have negligible impact on the NPP of terrestrial ecosystems. There were, however, spatial variations in the response of NPP-engineered solar radiation. While productivity decreased by less than 2% in the tropical and boreal forests as hypothesized, it increased by a similar percentage in the temperate deciduous forests and grasslands. This increase in productivity was attributed to a 1% reduction in evapotranspiration in the Geoengineered scenario relative to the Doubled CO₂ scenario. Our initial hypothesis was rejected because of unanticipated effects of engineered solar radiation on the hydrologic cycle. However, any geoengineering approaches that reduce incident solar radiation need to be thoroughly analyzed in view of the implications on ecosystem productivity and the hydrologic cycle.     

Elucidation of the tidal influence on bacterial populations in a monsoon influenced estuary through simultaneous observations

The influence of tides on bacterial populations in a monsoon influenced tropical estuary was assessed through fine resolution sampling (1 to 3 h) during spring and neap tides from mouth to the freshwater end at four stations during pre-monsoon, monsoon and post-monsoon seasons. Higher abundance of total bacterial count (TBC) in surface water near the river mouth, compared to the upstream, during pre-monsoon was followed by an opposite scenario during the monsoon When seasonally compared, it was during the post-monsoon season when TBC in surface water was highest, with simultaneous decrease in their count in the river sediment. The total viable bacterial count (TVC) was influenced by the depth-wise stratification of salinity, which varied with tidal fluctuation, usually high and low during the neap and spring tides respectively. The abundance of both the autochthonous Vibrio spp. and allochthonous coliform bacteria was influenced by the concentrations of dissolved nutrients and suspended particulate matter (SPM). It is concluded that depending on the interplay of riverine discharge and tidal amplitude, sediment re-suspension mediated increase in SPM significantly regulates bacteria populations in the estuarine water, urging the need of systematic regular monitoring for better prediction of related hazards, including those associated with the rise in pathogenic Vibrio spp. in the changing climatic scenarios.     

'Pheromone-like' compounds in the cuticle of aquatic Chironomus larva

Chironomid midges are the most commonly found dipteran insects in all types of aquatic ecosystems. Cuticular extract was bio-assayed, and it exhibited enhanced attraction to the larvae. Therefore, it was subsequently analysed by gas chromatography-mass spectrometry. Two compounds were identified as farnesol and farnesene. Bioassay of farnesol indicated its attractive properties. The components present in the cuticular extract can, therefore, be considered as pheromone-like compounds.     

Occurrence,toxicity and remediation of polyethylene terephthalate plastics. A review

Environmental Chemistry Letters - Polyethylene terephthalate is a common plastic in many products such as viscose rayon for clothing, and packaging material in the food and beverage industries....     

Endosulfan reduces fertilization success and causes abnormal embryo development to zebrafish

Abstract

Reproductive and teratogenic effects of endosulfan were investigated by exposure of mature breeding zebrafish (Danio rerio) to environmentally relevant concentrations of 0.01–1.2?μg L^?1 and monitoring their spawning, fertilization success, and gonad histology. Fertilization success was negatively correlated to duration of exposure at endosulfan concentration of 1.2?μg L^?1. No apparent effect was observed on fish gonads after histological examination. Teratogenic effects were assayed by exposing newly spawned embryos to endosulfan at 1.0–200?μg L^?1 and determining coagulation, tail development, eye formation, and spontaneous movements 24?h after fertilization; pigmentation, heart rate, edema, and mortality after 48?h and hatch time, mortality, and spinal deformations after 144?h. At 50–100?μg L^?1, endosulfan caused impaired tail development and differentiation, and at 10–200?μg L^?1 spinal deformation and increased mortality, depending upon the timing of exposure.     

Changes in anoxic denitrification rate resulting from prefermentation of a septic, phosphorus-limited wastewater.

A preliminary bench-scale study of parallel University of Cape Town (UCT) biological nutrient removal systems showed improvement in anoxic denitrification rates resulting from prefermentation of a septic (i.e., high volatile fatty acid [VFA] content), phosphorus-limited (i.e., total chemical oxygen demand/total phosphorus [TP] ratio < 40:1) wastewater. Net phosphorus removals due to enhanced biological phosphorus removal (EBPR) were only improved marginally by prefermentation in spite of significant increases in anaerobic phosphorus release, polyhydroxyalkanoate formation, and higher anoxic and aerobic uptakes. This probably was due to the high VFA/TP ratio in the raw influent relative to the VFA requirements for EBPR because enough VFAs were already present for phosphorus removal prior to prefermentation. An additional assessment of prefermentation using parallel UCT systems with step feed of 50% of the influent to the anoxic zone was completed. This second phase quantified the effect of prefermentation in a step-feed scenario, which prioritized prefermentation use to enhance denitrification rather than EBPR. While specific denitrification rates in the anoxic zone were significantly improved by prefermentation, high denitrification in the clarifiers and aerobic zones (simultaneous denitrification) made definitive conclusions concerning the potential improvements in total system nitrogen removal questionable. The prefermented system always showed superior values of the zone settling velocity and sludge volume index and the improvement became increasingly statistically significant when the prefermenter was performing well.     

Environmental assessment of laser assisted manufacturing: case studies on laser shock peening and laser assisted turning

Laser assisted manufacturing processes, when compared with traditional manufacturing processes, have the potential to reduce cost, increase surface resistance to wear and fatigue, extend part/tool life, and expand the range of manufacturable materials. These processes have found niche applications in automotive, aerospace, and defense industries. However, very limited research has been conducted to evaluate and compare the environmental performance of laser assisted processes with traditional methods. This paper conducts case studies on two representative laser based processes, i.e. laser shock peening of 7075-T7351 Aluminum and laser assisted turning of compacted graphite iron. Life cycle assessment is used to benchmark the environmental performance of these two processes to conventional processes, i.e. shot peening and turning, respectively. The life cycle inventory of both the laser based processes and conventional processes are developed using SimaPro 7.1 and the Ecoinvent 2.0 database and life cycle impact assessment is performed using US EPA TRACI. The results of this study show that the environmental performance of the two laser based processes is significantly better than conventional processes. For laser shock peening of aluminum, contribution analysis indicates that this is mainly due to the significant extension of fatigue life of the workpiece being treated. For laser assisted turning of compacted graphite iron, the improved performance is mainly due to the extended tool life since cutting tool manufacturing is an energy intensive process. Development of high-power laser with a lower wavelength (e.g. direct diode system) could eliminate the use of paint in laser assisted turning. This, along with improved wall plug efficiency, makes laser assisted turning even more environmentally benign compared to conventional process. A brief cost analysis suggests that both laser shock peening and laser assisted turning can be economically viable with payback period less than three years for niche applications.