Exposure assessment for methyl and total mercury from seafood consumption in Korea, 2005 to 2008

Reports on the occurrence and intake assessment of mercury for Korean seafood are currently not available. This is the first report to estimate the intake of methyl (Me-Hg) and total mercury (T-Hg) from seafood consumption in Korea. The concentrations of Me-Hg and T-Hg in seafood ranged from 1.02 to 780 (mean: 55.6) ng g(-1) wet weight and 4.89 to 1008 (mean: 100) ng g(-1) wet weight, respectively. The residue levels of Me-Hg and T-Hg in Korean seafood were moderate compared with those found in other countries. The methylation ratios of fish, cephalopods and crustaceans were similar, but shellfish had lower values compared with other species. The intakes of Me-Hg and T-Hg from seafood consumption for the general population were estimated to be 38.8 and 73.8 ng kg(-1) body weight per day, respectively. Mackerel, tuna and squid made the highest contributions to the total intake of these contaminants. Among eight age groups, 30-49 year and 3-6 year age groups had the highest exposure to Me-Hg and T-Hg. The concentrations and intakes of Me-Hg and T-Hg from Korean seafood were less than the allowable residue levels and threshold intake levels suggested by Korean and international authorities. The present study may be useful for risk management of mercury in Korean seafood.     

Assessing the Removal Efficiency of Murine Norovirus 1, Hepatitis A Virus,and Human Coronavirus 229E on Dish Surfaces Through General Wash Program of Household Dishwasher

Food and Environmental Virology - The performance of dishwashers in removing live viruses is an important informative value in practical applications. Since foodborne viruses are present in...     

Particle Surface Hydrophobicity and the Dechlorination of Chloro-Compounds by Iron Sulfides

Halogenated aliphatic compounds (HACs) can be reduced by iron sulfides in aqueous systems. Generally, the thermodynamics and kinetics of dehalogenation reactions are controlled by the mineralogical and particle surface characteristics of the iron sulfide, the composition of the HAC and reaction conditions such as component concentrations, pH and Eh. In this theoretical and experimental investigation of CCl₄ and C₂Cl₆ reduction by FeS and FeS₂, the roles of hydrophobic and hydrophilic sites on the iron sulfides were analyzed. Experimental data obtained through zeta potential measurements, were used along with the Gouy-Chapman model and the simple two-layer surface complexation model to relate iron sulfide surface hydroxyl densities to the degree of HAC dehalogenation. The surface hydroxyl site densities of FeS and FeS₂ were found to be 0.11 sites/nm² and 0.21 sites/nm², respectively. During the dehalogenation reaction process, CCl₄ was found to decrease to its first intermediate product CHCl₃ within the first 20 hours followed by a slower process of conversion to CH₂Cl₂. The results also show that FeS is less hydrated (more hydrophobic) than FeS₂. For CCl₄ and C₂Cl₆, FeS is a better dehalogenator than FeS₂. These results imply that particle surface hydrophobicity is a critical factor in surface-mediated dehalogenation of chlorinated compounds.     

Improvement of nuclide leaching resistance of paraffin waste form with low density polyethylene

Low-level liquid borate wastes have been immobilized with paraffin wax using a concentrate waste drying system (CWDS) in Korean nuclear power plants. The possibility for improving chemical durability of paraffin waste form was suggested in this study. A small amount of low density polyethylene (LDPE) was added to increase the leaching resistance of the existing paraffin waste form. The influence of LDPE on the leaching behavior of waste form was investigated by performing leaching test according to ANSI/ANS-16.1 procedure during 325 days. It was observed that the leaching of nuclides immobilized within paraffin waste form made a marked reduction although little content of LDPE was added to waste form. The acceptance criteria of paraffin waste form associated with leachability index (LI) and compressive strength after the leaching test were fully satisfied with the help of LDPE.     

Distribution and hydrodynamic model of the Keumdong oil spill in Kwangyang Bay, Korea

Oil concentrations in the seawater, seabed sediments, and shoreline sediments were measured from the samples collected 165 days after the Keumdong oil spill accident, which had occurred in Kwangyang Bay of the South Sea, Korea in September 1993. Distribution patterns of the concentrations in the seabed and shoreline sediments have allowed us to hindcast the transport and fate of the spilled oil. Overall, the patterns agree better with the southward (seaward) surface water circulation than with the northward (landward) bottom water circulation over the region. Rapid, initial dispersal of the spilled oil to the south and its subsequent grounding onto the intertidal seabed sediments, as well as onto the shorelines, appear to have made ineffective the subsurface oil transport by the bottom current.     

UV Spectroscopic Monitoring of Vaporized Monoaromatic Hydrocarbons from Petroleum-Contaminated Soils

Fast and simple systems using ultraviolet (UV) absorbance were examined for on-line monitoring of monoaromatic hydrocarbons from petroleum-contaminated soils in this research. Since soil particles hinder the UV light transmittance, the absorbance measurement of vaporized monoaromatic hydrocarbons in soil gas extracted from petroleum-contaminated soils was proposed. In the fixed system that exhibited higher sensitivity than the portable one, the absorbance intensity of benzene, toluene, ethylbenzene, and xylene increased in proportion to the concentration of the contaminants. The portable system, however, was suitable for screening purpose, while it exhibited faster response. There was no interference from water, which helps the applicability of the proposed systems to the actual fields.     

Catalytic upgrading pyrolysis of pine sawdust for bio-oil with metal oxides

The catalytic upgrading pyrolysis of pine sawdust was performed at 500 °C with various metal oxides to improve the quality of the bio-oil. The aim of this study was to investigate the potential of the metal oxides instead of traditional zeolites for catalytic upgrading pyrolysis with the analysis of Gas Chromatograph/Mass Spectrometer. In this study, the used catalysts were Calcium-oxide, Magnesium oxide, Titanium dioxide, and Zeolite (Si/Al?=?80). The influence of catalysts on products yields and compositions were investigated. Most metal oxides can enhance the bio-gas with the bio-oil yields decreased. The metal oxides led to a decrease of Acids, Aldehydes, Ketones and an increase of Furfural, Cresols, Catechols in Furans and Phenolics. Among the catalysts, the MgO catalysts was the most effective to convert the high molecular into lights ones (6.65% Cresols) with yield of 20.48% for Furfural. The deoxygenation reaction in bio-oil was suggested to convert oxygenated compounds into the low molecular weight of the materials (6.39% Guaiacols). Thus, the used metal oxides can improve the quality of bio-oil by decreasing undesirable compounds as well as increasing the desirable compounds with low oxygen contents via deoxygenation reaction.     

Absorption characteristics of potassium carbonate-based solutions with rate promoters and corrosion inhibitors

In this research, absorbents for CO₂ capture were prepared by blending 30 wt% potassium carbonate, 3 wt% of a rate promoter, and 1 wt% of a corrosion inhibitor. Pipecolic acid, sarcosine, and diethanolamine were chosen as rate promoter candidates. Based on a rate promoter screening test for CO₂ loading capacity and absorption rate, pipecolic acid and sarcosine were selected to be used as rate promoters. 1,2,3-benzotriazole and ammonium thiocyanate were chosen as corrosion inhibitors, and they were mixed with a 30 wt% potassium carbonate-based absorbent mixture containing one of the rate promoters. The absorption rates for four absorbent solutions (30 wt% potassium carbonate?+?3 wt% pipecolic acid?+?1 wt% 1,2,3-benzotriazole, 30 wt% potassium carbonate?+?3 wt% pipecolic acid?+?1 wt% ammonium thiocyanate, 30 wt% potassium carbonate?+?3 wt% sarcosine?+?1 wt% 1,2,3-benzotriazole, and 30 wt% potassium carbonate?+?3 wt% sarcosine?+?1 wt% ammonium thiocyanate) were measured, tabulated, and graphically displayed. These types of absorbents can be used for capturing CO₂ under high temperature and pressure conditions, such as those found in coal-fired power plants.     

Gasification characteristics of biomass for tar removal by secondary oxidant injection

Gasification experiments for sawdust were conducted using a fixed bed reactor at 900 °C by varying the secondary oxidant injection ratio to determine the optimal conditions for tar removal along with the enhancement of gasification efficiency. Secondary oxidant was injected as an oxidant at the top zone of the gasifier in varying ratios of 10–30% of the total amount of oxidant. This method was based on the primary method of tar removal and gasification efficiency improvement by thermal cracking of tar. Various gasification performance parameters were evaluated and tar content was estimated by measuring the fluctuation of weight of the activated carbon filter. The results showed that the concentration of tar in the producer gas decreased by injecting the secondary oxidant, even though syngas yield decreased. The recycling potential of the char produced in the gasification experiments was also assessed with the purpose of utilizing char as an adsorbent by determining its surface area and pore volume. The results demonstrated that the char produced from the gasification experiment had similar quality to that of the activated carbon used in this experiment.     

Gender differences in public office workers’ satisfaction,subjective symptoms and musculoskeletal complaints in workplace and office environments

This study investigates differences between male and female public office workers’ satisfaction levels, sick building syndrome (SBS) symptoms and musculoskeletal disorder (MSD) complaints in workplace and office environments. Questionnaire surveys were performed in 30 offices from 15 public institutions. Male and female workers of the same age were coupled and selected from each office, gathering a total of 120 male and 120 female subjects. The results show that differences exist between genders in noise and lighting satisfaction levels, SBS-related symptoms (eye, nose, skin) and MSD complaints of hand/wrist/finger, while there is no difference in overall satisfaction level of office environments. The study also suggests that office design for public office workers should take into account gender differences in preventing MSDs and also SBS. The findings of this study are expected to serve as basic data for designing effective public office environments.