Optimal water and waste-load allocations in rivers using a fuzzy transformation technique: a case study

In this paper, a new methodology is developed for integrated allocation of water and waste-loads in river basins utilizing a fuzzy transformation method (FTM). The fuzzy transformation method is used to incorporate the existing uncertainties in model inputs. In the proposed methodology, the FTM, as a simulation model, is utilized in an optimization framework for constructing a fuzzy water and waste-loads allocation model. In addition, economic as well as environmental impacts of water allocation to different water users are considered. For equitable water and waste load allocation, all possible coalition of water users are considered and total benefit of each coalition, which is a fuzzy number, is reallocated to water users who are participating in the coalition. The fuzzy cost savings are reallocated using a fuzzy nucleolus cooperative game and the FTM. As a case study, the Dez River system in south-west of Iran is modeled and analyzed using the methodology developed here. The results show the effectiveness of the methodology in optimal water and waste-loads allocations under uncertainty.     

Experimental and Numerical Analysis of CO Concentration Dispersion of Vehicular Exhaust Emissions in Isolated Environment

Numerical and experimental analyses were applied to carbon monoxide (CO) concentration dispersion to monitor air quality in an enclosed residential complex parking area in Tehran. Firstly, the parking area was preliminary assessed through verifying the characteristics of the problem including the geometry and boundary conditions. Then, proportion of vehicular exhaust emissions was estimated and eventually experimental and numerical analyses were performed. In order to perform numerical calculation, a three-dimensional model was created to numerically simulate the enclosed residential complex parking area by FLUENT software that solves flow governing equations with finite volume method. In FLUENT, species model was selected to assess the dispersion of CO in flow domain. In experimental analysis, CO concentration was measured using sampling bags with a volume of 10 l in 4 min at 6 different points. The sample air was drawn into sampling bags by electric pumps. The findings show that the maximum amount of CO concentration is above the permissible standard recommended by the World Health Organization. Pollutant accumulation was significant in confined areas. In the place where openings exist, the level of accumulation was lower than other areas. The findings obtained from numerical simulation are in complete accord with experimental results.     

Comparison of different static methods for assessment of AMD generation potential in mining waste dumps in the Muteh Gold Mines,Iran

Acid mine drainage (AMD) gives rise to several problems in sulfide-bearing mineral deposits whether in an ore body or in the mining wastes and tailings. Hence, several methods and parameters have been proposed to evaluate the acid-producing and acid-neutralizing potential of a material. This research compares common static methods for evaluation of acid-production potential of mining wastes in the Muteh gold mines by using 62 samples taken from six waste dumps around Senjedeh and Chah-Khatoun mines. According to a detailed mineralogical study, the waste materials are composed of mica-schist and quartz veins with a high amount of pyrite and are supposed to be susceptible to acid production, and upon a rainfall, they release acid drainage. All parameters introduced in different methods were calculated and compared in this research in order to predict the acid-generating and neutralization potential, including APP, NNP, MPA, NPR, and NAGpH. Based on the analytical results and calculation of different parameters, all methods are in a general consensus that DWS-02 and DWS-03 waste dumps are acid-forming which is clearly attributed to high content of pyrite in samples. DWS-04 is considered as non-acid forming in all methods except method 8 which is uncertain about its acid-forming potential and method 7 which considers a low potential for it. DWC-01 is acid-forming based on all methods except 8, 9, 10, and 11 which are also uncertain about its potential. The methods used are not reached to a compromise on DWS-01 and DWC-02 waste dumps. It is supposed that method 7 gives the conservationist results in all cases. Method 8 is unable to decide on some cases. It is recommended to use and rely on results provided by methods 1, 2, 3, and 12 for taking decisions for further studies. Therefore, according to the static tests used, the aforementioned criteria in selected methods can be used with much confidence as a rule of thumb estimation.     

Phytoextraction of heavy metals from contaminated soil,water and atmosphere using ornamental plants: mechanisms and efficiency improvement strategies

Environmental Science and Pollution Research - Accumulation of heavy metals (HMs) in soil, water and air is one of the major environmental concerns worldwide, which mainly occurs due to...     

Improving Water Resistance of Soy-Based Adhesive by Vegetable Tannin

In this research tannic acid was used to prepare soy-based adhesives for making plywood and fiber board. The different resin formulations were analyzed by Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and its derivative as a function of temperature (DTG) and Fourier Transform Infra-red (FTIR) spectroscopy. The results showed that the addition of tannic acid to soy-based adhesive decreased soy-based adhesive viscosity and its pH. The DSC analysis showed that the denaturation temperature of soy-based adhesives decrease by adding tannic acid. The TGA and DTG curves showed that the thermal degradation of soy flour starts above 146 °C. The FTIR spectroscopy results also showed that the soy flour amino acids appeared to react well with tannic acid. Furthermore, delamination and shear strength test results showed the good water resistance of plywood bonded with soy-based tannic acid-modified adhesive. The mechanical and physical properties such as MOR, MOE, IB, and water resistance of fiberboard were improved, by adding tannic acid to the soy-based adhesive.     

A charge model for household waste management services: a case study of Tehran municipality

In practice, it is difficult to implement Pay-As-You-Throw charge systems based on accurate estimates of waste generation. In many cities, this is made impossible, due to lack of technical and administrative infrastructure and cultural considerations, especially in developing countries. This paper presents an alternative two-component charge model that is the combination of cost-accounting technique of Waste Management Services (WMSs) and econometric functions of waste generation. Practical and computation steps considered by the model are presented as a proposal to reform the current system of waste charge in Tehran municipality. The presented model is simple to implement and resolves some of the disadvantages of the traditional methods of waste charge systems, including insufficient revenue to cover the cost of waste management and unfairness related to social inequality.     

The association between bisphenol A exposure and type-2 diabetes: a world systematic review

The present study was conducted to systematically review, analyze, and interpret all the relevant evidence in the literature on the possible link between exposure to bisphenol A (BPA) and the risk of type-2 diabetes mellitus (T2DM). We developed a comprehensive search strategy and used it to search Web of Science, Scopus, PubMed, and Google Scholar up to March 31, 2016, producing 3108 hits, of which 13 original papers were included. Findings of these studies were quite controversial; few studies indicated a significant positive association between BPA exposure and T2DM, while some other failed to detect such a relationship. Overall, it can be suggested that chance is unlikely the plausible explanation for the observed association between BPA exposure and T2DM. This was mainly because even in the negative studies some clues could be found in favor of a statistically significant relationship between BPA and T2DM. Additionally, some of the studies had shortcomings in defining the exposure and outcome measures, which, if present, might have led to underestimating the relationship between BPA exposure and T2DM. The theoretical plausibility of such a relationship found earlier in animal studies also supports this point. However, more definitive answer requires the conduct of future longitudinal studies, in which the possible association between BPA exposure and T2DM is assessed over much longer periods of time with more temporally robust BPA measurements. In addition, it would be quite beneficial if future studies be conducted in areas where data is still lacking (e.g., South America, Australia/Oceania, and Europe).

Open image in new window

Graphical abstract ?

     

Organochlorine contaminants in the hair of Iranian pregnant women

In the present study, the hair of pregnant women was sampled between November 2007 and January 2008 in Ahvaz and Noushahr cities and the countryside of Noushahr, Iran. They were analyzed for organochlorine pesticides (OCPs), such as dichlorodiphenyltrichloroethane (DDT) and its metabolites, hexachlorobenzene (HCB), α-, β-, and γ-hexachlorocyclohexane (HCH) isomers and seven polychlorinated (PCBs) congeners (IUPAC Nos. 28, 52, 101, 118, 138, 153 and 180). Significant differences between the concentrations of investigated pollutants were found between the locations (p < 0.05). For HCHs, the γ-HCH isomer was measured at higher mean concentrations (6 ng g⁻¹ hair) compared to the β-HCH isomer (0.03 ng g⁻¹), which generally is the most prevalent HCH in biological matrices. Very high mean concentrations of p,p′-DDT in countryside of Noushahr (24 ng g⁻¹) combined with lower values (0.6) of ratio p,p′-DDE/p,p′-DDT in the hair samples suggest recent exposure to “fresh” DDT in this region. Significant differences in OCPs and PCBs were found between primiparous and multiparous mothers (p < 0.05). There was no correlation between levels of OCPs and PCBs in the hair of Iranian pregnant women and their age. There was a significant difference (p < 0.05) in the organochlorine levels, including HCHs, between mothers who have eaten fish once a week and those who consumed fish more than once per week in Noushahr.     

Investigating green roofs’ CO2 sequestration with cold- and drought-tolerant plants (a short- and long-term carbon footprint view)

Environmental Science and Pollution Research - In recent years, green roofs have become the subject of increasing interest because of their good aesthetic qualities, energy conservation, and...     

Environmental geochemistry of higher radioactivity in a transboundary Himalayan river sediment (Brahmaputra,Bangladesh): potential radiation exposure and health risks

Environmental Science and Pollution Research - This study of a downstream segment (Brahmaputra, Bangladesh) of one of the longest transboundary (China-India-Bangladesh) Himalayan rivers reveals...