Occurrence of phthalates in aquatic environment and their removal during wastewater treatment processes: a review

Phthalates are plasticizers and are concerned environmental endocrine-disrupting compounds. Due to their extensive usage in plastic manufacturing and personal care products as well as the potential to leach out from these products, phthalates have been detected in various aquatic environments including drinking water, groundwater, surface water, and wastewater. The primary source of their environmental occurrence is the discharge of phthalate-laden wastewater and sludge. This review focuses on recent knowledge on the occurrence of phthalate in different aquatic environments and their fate in conventional and advanced wastewater treatment processes. This review also summarizes recent advances in biological removal and degradation mechanisms of phthalates, identifies knowledge gaps, and suggests future research directions.     

Pilot-scale biopesticide production by Bacillus thuringiensis subsp. kurstaki using starch industry wastewater as raw material

Pilot-scale Bacillus thuringiensis based biopesticide production (2000 L bioreactor) was conducted using starch industry wastewater (SIW) as a raw material using optimized operational parameters obtained in 15 L and 150 L fermenters. In pilot scale fermentation process the oxygen transfer rate is a major limiting factor for high product yield. Thus, the volumetric mass transfer coefficient (K_La) remains a tool to determine the oxygen transfer capacity [oxygen utilization rate (OUR) and oxygen transfer rate (OTR)] to obtain better bacterial growth rate and entomotoxicity in new bioreactor process optimization and scale-up. This study results demonstrated that the oxygen transfer rate in 2000 L bioreactor was better than 15 L and 150 L fermenters. The better oxygen transfer in 2000 L bioreactor augmented the bacterial growth [total cell (TC) and viable spore count (SC)] and delta-endotoxin yield. Prepared a stable biopesticide formulation for field use and its entomotoxicity was also evaluated. This study result corroborates the feasibility of industrial scale operation of biopesticide production using starch industry wastewater as raw material.     

Abrasive jet machining by means of velocity shear instability in plasma

The material removal within different machining process can be performed in distinct modalities. One of the modality is based on the erosion phenomena. In this paper, theoretical model of abrasive jet machining based on erosion phenomenon is discussed. The material is removed from the surface due to erosion. In abrasive jet machining process, the output parameter is achieved by controlling various input parameters. This paper discusses the effects of various input parameters in abrasive jet machining (AJM) on the material removal rate (as the output parameter). The results presented in the paper are obtained from a theoretical study carried out with the help of mathematical model and computational technique. Theoretical investigation indicates that magnetic field, electric field and inhomogeneity in DC electric field have significant effect on metal removal by abrasive jet machining process.     

Induction of cytochrome p‐450 and phosphatidylcholine synthesis by endosulfan in liver of rats : Effect of quality of dietary proteins

Abstract

Administration of endosulfan significantly increased microsomal protein, cytochrome P‐450 content and the activity of aminopyrine N‐demethylase. Effect of endosulfan and actinomycin D either alone or together on microsomal protein, cytochrome P‐450, NADPH cytochrome c reductase, aniline hydroxylase, aminopyrine N‐demethylase, phosphatidylcholine content, incorporation of ³H‐choline and ¹⁴C‐methionine were studied in rats given amino acid deficient and supplemented diets. Administration of endosulfan significantly increased the above parameters in both the dietary groups, whereas administration of actinomycin D did not have any effect in rats fed supplemented diets, however, significant decrease in the PC and the incorporation of choline and methionine into PC of rats fed deficient diet were observed. A positive correlation in the effect of endosulfan on hepatic mixed function oxidase activity and hepatic phosphatidylcholine is observed.     

Assessment of Air Quality After the Implementation of Compressed Natural Gas (CNG) as Fuel in Public Transport in Delhi, India

Public transport in Delhi was amended by the Supreme Court of India to use Compressed Natural Gas (CNG) instead of diesel or petrol. After the implementation of CNG since April 2001, Delhi has the highest fraction of CNG-run public vehicles in the world and most of them were introduced within 20 months. In the present study, the concentrations of various criteria air pollutants (SPM, PM₁₀, CO, SO₂ and NO_x) and organic pollutants such as benzene, toluene, xylene (BTX) and polycyclic aromatic hydrocarbons (PAHs) were assessed before and after the implementation of CNG. A decreasing trend was found for PAHs, SO₂ and CO concentrations, while the NO_x level was increased in comparison to those before the implementation of CNG. Further, SPM, PM₁₀, and BTX concentrations showed no significant change after the implementation of CNG. However, the BTX concentration demonstrated a clear relation with the benzene content of gasoline. In addition to the impact of the introduction of CNG the daily variation in PAHs levels was also studied and the PAHs concentrations were observed to be relatively high between 10 pm to 6 am, which gives a proof of a relation with the limited day entry and movement of heavy vehicles in Delhi.     

Rheological profile of diets produced using agro-industrial wastes for rearing codling moth larvae for baculovirus biopesticides

A rheological study of diets using the agro-industrial wastes (brewery wastewater and pomace waste) was carried out in order to obtain a diet most adapted to supply nutrients for growth of codling moth (CM) larvae. Nutritive capacity (g/L) of brewery wastewater (BWW) (25.5 ± 5.5 carbohydrates; 16.9 ± 2.1 proteins; 6 ± 1.6 lipids) and pomace waste (POM) (22.0 ± 0.03 carbohydrates; 11.3 ± 1.3 proteins; 2 ± 0.2 lipids) were essential and important as replacement or in association with other ingredients [soya flour (SF), wheat germ (WG), yeast extract (YE)] of the standard diet for the breeding of codling moth larvae. These diet additives also contributed to the preservation of texture and nutritive content of larvae diet. The eggs and CM larvae were grown on alternate diets under industrial conditions (16:8 h photoperiod; 25 ± 1 °C and 50 ± 0.5 % of humidity). The higher assimilation of nutrients of the diets in BWW and control diet was observed by calculating the rate of hatching of eggs (0.48 to 0.71); larvae growth (0.23 to 0.4) and fertility (1.33 to 3 for control diet). The excellent growth and fertility rates of codling moth larvae were attributed to variations in viscosity (varying from 50 to 266 mPa.s?1), particle size (varying 24.3 μm in 88.05 μm with regard to 110 μm the control diet) and total solids (145.88 g/L POM + YE; 162.08 g/L BWW + YE; 162.2 g/L POM + WG; 173 g/L control; 174.3 g/L BWW + WG) diets. Lower viscosity favored improved diet due to ease of assimilation of nutrients. Thus, rheology is an important parameter during preparation of diets for growth of codling moth larvae as it will dictate the nutrient assimilation which is an important parameter of larvae growth.     

Oxidation of natural and synthetic hormones by the horseradish peroxidase enzyme in wastewater

Steroid estrogens, including both natural estrogens (e.g., estrone - E1; 17beta-estradiol - E2; and estriol - E3) and synthetic estrogens (e.g., 17alpha-ethinylestradiol - EE2), are known as endocrine-disrupting compounds. The objective of this research was to evaluate the feasibility of the enzymatic oxidation of estrogens and to optimize this process in municipal wastewater contaminated with steroid estrogens using horseradish peroxidase (HRP) and hydrogen peroxide. An initial HRP activity of 0.02 U ml(-1) was sufficient to completely remove EE2 from the synthetic solution, although greater HRP doses (up to 0.06 U ml(-1)) were required to remove E1, E2 and E3. The optimal molar peroxide-to-substrate ratio was determined to be approximately 0.45. Based on the Michaelis-Menten kinetics, the HRP had an increasing reactivity with E1, E3, E2, and EE2, in increasing order. In real activated sludge process effluent, an HRP dose of 8-10 U ml(-1) was required to completely remove all of the studied estrogens, while only 0.032 U ml(-1) of HRP was necessary to treat synthetic water containing the same estrogen concentrations.     

Performance of RBC coupled to a polyurethane foam to biodegrade petroleum refinery wastewater

Biological treatment of petroleum refinery wastewater was studied in a rotating biological contactor (RBC) coupled to a polyurethane foam (PUF) as a porous biomass support. The PUF was attached on both sides of biodisks. The biodegradation studies were carried out at varying hydraulic and organic loadings. COD removal efficiency of up to 87% was achieved. The results obtained in terms of biodegradation of COD, NH3-N, phenol, hydrocarbons and suspended solids in this study were compared with those in the literature. The RBC-PUF bioreactor was found to have a better performance than a conventional RBC for the biodegradation of the above mentioned parameters. A higher concentration of active biomass (77 g TVS/m2) was observed in the RBC-PUF as compared to other treatment systems. A linear relationship between COD applied and COD removed was observed for the combined four stage system as well as for the individual stages.     

Assessment of groundwater contamination from fertilizers in the Delhi area based on 0, N03 and K composition

Increasing application of nitrogen fertilizers in the irrigated lands of the studied area is likely to create a blanket non-point source of nitrate. Groundwater contamination from fertilizers, in this context, has been reported as derived from N0₃⁻, K⁺ and ¹⁸0 composition of groundwater. The data suggest both point and non-point sources of groundwater pollution. Thirty-three percent of the groundwater samples showed nitrate contents exceeding the general acceptable limit of 20 p.p.m. and 15% of the samples crossed the maximum permissible limit of 45 p.p.m. High nitrate levels are associated with high δ¹⁸O values, clearly indicating that significant quantities of evaporated (isotopically enriched) irrigation water infiltrate along with fertilizer nitrate to the groundwater system. Different δ¹⁸O---N0₃⁻ trends suggest isotopically distinct, non-point source origins which vary spatially and temporally, due to different degrees of evaporation/recharge and amounts of fertilizer applied. A scatter diagram of N0₃⁻ vs K⁺ suggests a common source of these ions when the concentration is less than 40 p.p.m. The investigation indicates that a combination of isotope (¹⁸0) and hydrochemical data can clearly characterize the impact of fertilizer on groundwater. Application of high nitrate, high potassium groundwater irrigation can minimize the requirement for inorganic fertilizers and bring down the cost of cultivation considerably, through appropriate management of fertilizer and water and modifications in agronomic practices and strategies on crops grown. Such practices will help protect groundwater from further degradation.     

Study of physico-chemical characteristics of water bodies around Jaipur

The present study has been undertaken to evaluate physico-chemical parameters (pH, temperature, dissolved oxygen, free carbon dioxide, alkalinity and hardness) and zinc concentration in water bodies in and around Jaipur. Water samples from Jalmachal Lake, Nevta Lake, Amer Lake and Ramgarh Lake were analysed. Results reveal that the water of Jalmahal Lake is most polluted due to high pH, hardness, alkalinity, free carbon dioxide, zinc content, and a low level of dissolved oxygen. Contrarily Ramgarh Lake is least polluted, as it has high dissolved oxygen and low pH, alkalinity, free carbon dioxide, hardness and zinc content.