Membrane fouling control by ultrasound in an anaerobic membrane bioreactor

In this study, ultrasound was used to control the membrane fouling online in an anaerobic membrane bioreactor (AMBR). Short-term running experiments were carried out under different operating conditions to explore feasible ultrasonic parameters. The experimental results indicated that when the crossflow velocity was more than 1.0 m/s, membrane fouling could be controlled effectively only by hydrodynamic methods without ultrasound. When ultrasound was applied, an ultrasonic power range of 60–150 W was suitable for the membrane fouling control in the experimental system. The experimental results showed that the membrane fouling was controlled so well that membrane filtration resistance (ΣR) could stay at 5 × 10¹¹ m⁻¹ for more than a week with the crossflow velocity of 0.75 m/s, which equaled the effect of crossflow velocity of more than 1.0 m/s without ultrasound. Translated from Techniques and Equipment for Environmental Pollution Control, 2006, 7(4): 25–29 [译自: 环境污染治理技术与设备]     

Toxic effects of wastewater from various phases of monosodium glutamate production on seed germination and root elongation of crops

To make a comprehensive assessment on monosodium glutamate (MSG) wastewater pollution, a pollution exposure experiment was carried out on the seed germination and root elongation of wheat, Chinese cabbage and tomato by using the wastewater discharged from different processing phases of MSG production. The results showed that there were significantly positive linear relationships between the inhibitory rates of wheat seed germination and root elongation and the COD_cr of the mother liquor scraps. The toxicity of MSG wastewater to the test crops was in the order of tomato > Chinese cabbage > wheat, indicating that tomato was the most sensitive to the wastewater, and could be considered as an ideal toxic bioindicator. The half-effect concentrations (IC₅₀) based on the seed germination and root elongation of the test crops exposed to the wastewater discharged from various processing phases of MSG production was 22.0–32 432 and 17.3–3320 mg/L, respectively. Translated from Chinese Journal of Applied Ecology, 2006, 17(7): 1286–1290 [译自: 应用生态学报]     

柔性散粒材料静力及动力学性能实验研究

战场环境下单兵防常规炸弹爆炸抗震减震技术装备及器材,由于受经费投入、战场环境等因素影响,一直没有成功研制并得到装备.通过室内砂箱振动台震动模拟试验,测试了不同柔性散粒材料在震动条件下的加速度值,对其减震性能作了一些初步的探讨.通过研究,可以看到柔性散粒材料在隔震方面具有其他材料所不具有的优越性能,可以作为制造隔震器材的首选.     

旱季污水总量暴雨强度拟和法确定合流制截流倍数

分析了影响截流倍数的影响因素，探讨了合理的截流倍数计算方法。通过某城市实例分析．发现合流制截流倍数应综合考虑合流水量．截流规模．排放污染物总量、水体排放要求及水体自净能力等，最终通过计算比较后确定。     

淮河流域多闸坝河流COD综合衰减系数测算

提出在多闸坝河流上，利用枯水期断面化学需氧量同步监测数据测算COD综合衰减系数的方法，用该方法测算河南省辖河流域部分河流COD综合减系数在0．08－0．341/d。并用实际监测结果进行检验。     

土壤中钼的形态分析方法研究

本文对土壤中有效钼的浸取条件进行最佳化，并利用提高灰化温度达到消除浸取剂对石墨炉原子吸收测定钼的影响，方法用于国标样品和武汉市区土壤样品中钼的形态分析，获得满意的分析结果。     

半球形件粘性介质压力成形的数值模拟研究

粘性压力成形技术是金属板材成形领域里新近出现的一种先进的加工工艺。对双面施放粘性介质的板材胀形进行了模拟研究 ,在双面施放介质的板材粘性介质胀形时 ,排放孔位置分布对毛坯成形过程有明显的影响。排放孔位置分布的不同造成模腔内介质的速度场不同 ,进而导致板材不同部位的流动速度的方向大小发生变化 ,最终使成形件的厚度分布不同     

复合诱变菌处理氨氮废水

采用诱变技术对微生物菌种进行了诱变处理，分别研究了紫外线诱变菌、硫酸二乙酯（DES）诱变菌和复合诱变菌对含氨废水的降解性能。结果表明，复合诱变后获得的变异菌株Z5对含氨废水中NH4^ -N的去除率比单独采用紫外线或DES诱变后获得的菌株有明显的提高。混合菌种对化肥行业废水中COD的NH4^ -N的去除率可以达到95%～98%，出水能达到行业一级排放标准。     

利用水生植物净化富营养化水体的研究进展

综述了近几年来利用水生植物净化富营养化水体的研究和应用现状，包括水生植物的净化机理和净化效果，并对目前常用净化富营养化水体的水生植物研究频度进行了统计。此外，还着重强调了水生植物在净化应用中需关注的问题，展望了这种净化技术的发展前景。     

活性污泥系统动力学模拟方法的综合分析

活性污泥法的应用现状和污水中氮磷排放标准的日益严格，使得传统数学模型已满足不了目前的要求，需要对活性污泥系统复杂的动力学规律进行有效模拟。文章在综合分析活性污泥动态模型国内外研究现状的基础上，介绍了3种占主流地位的模型：活性污泥数学模型、神经网络模型和混合模型。这3种模型在污水处理的设计、运行控制和工艺优化等方面各有其独到之处。