Innovative Approach for Estimating Fugitive Gaseous Fluxes Using Computed Tomography and Remote Optical Sensing Techniques

ABSTRACT

This paper presents a new approach to quantify emissions from fugitive gaseous air pollution sources. The authors combine Computed Tomography (CT) with Path-Integrated Optical Remote Sensing (PI-ORS) concentration data in a new field beam geometry. Path-integrated concentrations are sampled in a vertical plane downwind from the source along several radial beam paths. An innovative CT technique, which applies the Smooth Basis Function Minimization method to the beam data in conjunction with measured wind data, is used to estimate the total flux from the fugitive source. The authors conducted a synthetic data study to evaluate the proposed methodology under different meteorological conditions, beam geometry configurations, and simulated measurement errors. The measurement errors were simulated based on data collected with an Open-Path Fourier Transform Infra-Red system. This approach was found to be robust for the simulated errors and for a wide range of fluctuating wind directions. In the very sparse beam geometry examined (eight beam paths), successful emission rates were retrieved over a 70° range of wind directions under extremely large measurement error conditions.     

Pennsylvania’s Compuiterized Air Monitoring System

The Pennsylvania Air Pollution Commission has developed a regulatory program based upon the control of local air pollution problems and reduction of pollutant levels in air basins. The geographical boundaries of 10 air basins have been established. The Commission’s air basin regulations will provide for the reduction of over-all pollutant levels and for emergency procedures in the event of adverse meteorological conditions. The paper discusses the format and objectives of the program.

In order to effectively enforce the air basin regulations and maintain the necessary surveillance of the state’s air quality, a "computerized real time on-line integrated air monitoring-data handling system" has been designed. The system will incorporate a network to constantly monitor the air in each air basin.The primary objectives of the system are: 1. Constant surveillance of air pollution in the air basins.

2. Provide information on air pollution potential alerts.

3. Aid in further development of air quality criteria and regulations.

The air monitoring network is estimated to include approximately 25 remote stations. Each remote will contain air pollution and meteorological sampling equipment and hardware to telemeter to a central station. The data will be transmitted over leased telephone lines. The central station in Harrisburg will contain the necessary hardware to receive and process data, calculate and display results and permit supervisory control of the network. Output options will include immediate display of edited data, command and alarm information, and presentation of statistical results.

Although the air monitoring system is one of the principle ingredients of the program, the air basin concept encompasses other component systems designed to knit together the entire air pollution control program in Pennsylvania.     

生物法-人工湿地组合工艺处理小城镇混合污水研究

为适应小城镇污水处理高效、低耗、管理简单的要求,开展了生物法(水解酸化/生物接触氧化)-人工湿地组合工艺(A/BCO-CW)处理小城镇片区混合污水的研究。结果表明,A/BCO系统在停留时间为3～6 h条件下,对悬浮物和有机物有高的去除效率,COD、BOD5和TSS去除率分别达到63.1%、67.7%和66.2%,避免了人工湿地堵塞和提高处理效率,减少了所需湿地面积44%。全年运行结果表明,在0.30～0.59 m/d水力负荷率下,垂直流-表面流-水平潜流人工湿地组合系统对COD、BOD5和TSS平均去除负荷达9.4、5.1和7.2 g/(m2.d)(42%、71.2%和85.2%);COD、BOD5去除速率常数为74.6±12.1 m/y、166±30.5 m/y,这些数值均处于文献中k值范围的高量程内。A/BCO-人工湿地系统对COD、BOD5和TSS具有好的处理效果,出水水质能够稳定达到《地表水环境质量标准》(GB 3838-2002)的IV类水标准,2种处理方法有效组合起来,所开发的低成本、高效率、可持续运行的城镇废水处理组合系统,将会在实际应用尤其是高有机负荷污水处理中发挥良好效用。     

Product Guide/1970

Abstract

In Mexico City, the use and composition of fuels determine that carbon monoxide (CO) comes mostly from mobile sources, and sulfur dioxide (SO₂) from fixed and mobile sources. By simultaneously measuring hydrocarbons (HC), CO, and SO₂ in the atmosphere of Mexico City, the relative amounts coming from different sources can be estimated. Assuming that some HC are emitted proportionally to CO emissions, we can establish that [HC]₁= m1? [CO], where the proportionality constant ml corresponds to the ratio of emissions factor for HC and CO in mobile sources. Similarly for fuels containing sulfur, it can be assumed that [HC]₂ = m2 ? [SO₂]. In this way, the total HC are [HC]_total=[HC]₀+ ml ? [CO]+ m2 ? [SO₂], where [HC]₀ corresponds mainly to other sources like solvent evaporation, gas consumption, and natural emissions. In this way, it can be estimated that in Mexico City 75% of average HC comes from mobile sources, 5% from sulfur-related sources, and 19% from natural sources and solvent evaporation. Compared with the HC/CO ratio measured in the exhaust pipe of vehicles, we estimated that 70% of HC emitted from mobile sources are evaporative losses, and only 30% come through the exhaust system.     

Social and ecological facets of pest management in Honduran subsistence agriculture: implications for IPM extension and natural resource management

In subsistence farming systems of the developing world, adoption of resource-conserving practices such as integrated pest management (IPM) is often strikingly low. This has partially been ascribed to researchers’ limited understanding of how technologies develop at the interface of the systems’ social and ecological components. In Honduras (Central America), there exists concern about limited adoption and diffusion of IPM technologies in certain smallholder production systems. In this study, we determine social and ecological drivers of IPM adoption in subsistence maize production in the country’s hillside environment. Honduran small-scale maize production is typified by a key insect pest (the fall armyworm, Spodoptera frugiperda) being partly kept at bay through action of a diverse natural enemy complex, including ants, social wasps, carabid beetles, and spiders. Local agricultural landscapes, primarily shaped through shifting cultivation, provide key resources to maintain this natural enemy diversity. These local ecological conditions and related natural enemy abundance strongly influence farmers’ agroecological knowledge and pest management practices. In the meantime, farmer practices are also affected by local communication networks, which help validate and spread IPM concepts and technologies. Based on our findings, we advocate a holistic approach to improve IPM extension through mapping of agroecological opportunities, visualization of regional patterns in farmer knowledge, and associated priority setting. Local IPM capacity could be built through institutional strengthening and adaptive comanagement, while IPM training should be linked with natural resource management initiatives. These approaches may eventually improve the way IPM is delivered to small-scale farmers who operate in the ecologically diverse environments of the tropics.     

膜电解法在线再生酸性蚀刻液及回收铜新技术

采用极化曲线法研究了酸性蚀刻液阴、阳极电化学行为，并构建了离子膜电解反应体系，考察了在线再生酸性蚀刻液及回收铜的效果。结果表明，阳极氧化过程发生浓差极化，存在极限电流密度，Cu＋含量越高，极限电流密度越大；阴极还原分4步反应进行，存在极限电流密度；强化溶液传质可有效提高阴、阳极极限电流密度，有利于避免电解过程中析出氯气和氢气；在线实验表明，通过监控阳极液ORP，可避免析出氯气；分步降低电流电解有利于避免析出氢气，形成致密的金属铜块；在电流为9～24A范围内分4步电解23．5h可再生酸性蚀刻液23．5L，同时电沉积回收510g铜，纯度高达99．98％。阴极电流效率达到95．2％，吨铜电耗3251kWh。电解过程中无氯气和氢气析出，无废液排放，表明膜电解法在线再生酸性蚀刻液具有良好的应用前景。     

An Approach to Reaeration Coefficient Modeling in Local Surface Water Quality Monitoring

Reaeration coefficient (k ₂) for River Atuwara, Ogun State, Nigeria was calculated from dissolved oxygen and biochemical oxygen demand data collected over period of 3 months covering the two prevailing climatic seasons in the country. Both the Akaike and Bayesian information criteria were used in the selection and analysis of ten models to identify the most suitable reaeration coefficient (k ₂) model for Atuwara River. Models that passed the confidence limit were subjected to model evaluation using measures of agreement between observed and predicted data such as percent bias, Nash–Sutcliffe efficiency, and root mean square observation standard deviation ratio. The used approach yield better results than empirical models developed for local conditions while it is also useful in conserving scarce resources.     

Estrogen receptor mediated activity in bankside groundwater, with flood suspended particulate matter and floodplain soil - an approach combining tracer substance, bioassay and target analysis

Bankside groundwater is widely used as drinking water resource and, therefore, contamination has to be avoided. In the European Union groundwater protection is explicit subject to Water Framework Directive. While groundwater pollution may originate from different sources, this study investigated on impacts via flood events.Groundwater was sampled with increasing distance to the river Rhine near Karlsruhe, Germany. Samples were HPLC-MS-MS analyzed for the river contaminant carbamazepine to indicate river water infiltration, giving permanent presence in 250 m distance to the river (14-47 μg L⁻¹). Following a flood event, concentrations of about 16-20 μg L⁻¹ could also be detected in a distance of 750 m to the river. Furthermore, estrogenic activity as determined with the Yeast Estrogen Screen assay was determined to increase up to a 17β-ethinylestradiol equivalent concentration (E-EQ) = 2.9 ng L⁻¹ near the river, while activity was initially measured following the flood with up to E-EQ = 2.6 ng L⁻¹ in 750 m distance. Detections were delayed with increasing distance to the river indicating river water expansion into the aquifer.Flood suspended matter and floodplain soil were fractionated and analyzed for estrogenic activity in parallel giving up to 1.4 ng g⁻¹ and up to 0.7 ng g⁻¹, respectively. Target analysis focusing on known estrogenic active substances only explained <1% of measured activities.Nevertheless, river water infiltration was shown deep into bankside groundwater, thus, impacting groundwater quality. Therefore, flood events have to be in the focus when aiming for groundwater and drinking water protection as well as for implementation of Water Framework Directive.     

A Portable,Battery-Operated,Immediate-Readout Dust-Particle Analyzer

A portable, battery-operated, electro-optical dust analyzer operating on the principle of light scattering from individual dust particles in air drawn through a high-intensity light field has been developed for monitoring dust levels where external power may be unavailable. The instrument counts and size-discriminates airborne particles over two size ranges upwards of 0.3 microns with immediate readout. A dilution mechanism permits analysis of particulate concentrations as high as 2400 particles/cm³ on each channel. The self-contained Ni-Cd batteries are rechargeable. Total weight, including batteries and all components, is approximately 14 Ib. Total power used, mainly for pumping a filtered air sheath at 300 cm/sec and for the light source, is less than 34 watts. Another unique feature is the flow system designed for turbulence suppression.

Electronic calibration in terms of number of particles/cm³ for each size range is accomplished in the laboratory by means of a pulse generator with respect to which the readout indicator is calibrated for count. The input voltages to the pulse-height discriminators are appropriately attenuated for various pulse amplitudes simulating the output of the light-sensitive pickup, a photomultiplier tube.Pulse height as a function of particle size was measured for polystyrene latex beads ranging from 0.3 to 2 microns in diameter. Good correlation is obtained with results from commercial analyzers.

Field surveys have been undertaken with the CAES prototype analyzer at various sites in central Pennsylvania and at numerous sampling points within the cities of Pittsburgh and Philadelphia. Particulate concentrations as high as 1400 particles/ cm³ have been measured at a coal cleaning plant.     

The Removal of Particulate Matter from Fluid Bed Catalytic Cracking Unit Stack Gases

The application of a high-efficiency centrifugal type of separator to fluid bed catalytic cracking units is described in which most of the catalyst particles often lost to the atmosphere are concentrated into a small part of the stack gas (2%). A further separation can then be made on this small stream by an auxiliary separator which further concentrates the catalyst particle into 0.1% of the initia stream. Performance of the main and auxiliary separators are such as to reduce the loss of catalyst particles in the stack gas from 800 ppm to less than 60 ppm in a typical unit. Large amounts of power can be recovered by application of expander turbines to catalytic cracking plants employing this system of separation.