负载稀土元素活性碳纤维在微型反应器中净化NO废气

以NH3为还原剂,以活性碳纤维（ACF）、HNO,浸渍的ACF、负载CuO的ACF和负载La2O3的ACF为催化剂,在微型反应器中考察各种催化剂对NO催化还原的活性,并进行了差热-热重、扫描电镜分析。实验结果表明,ACF负载La能有效地改善催化剂的活性,且催化活性中心为非晶态的氧化物;当ACF负载20％的La2O3时具有最好的低温活性,NO的去除率最高可达92％以上。     

Distribution of polybrominated diphenyl ethers in breast milk,cord blood and placentas: a systematic review

Polybrominated diphenyl ethers (PBDEs) have been extensively used as flame retardants in consumer products. PBDEs rapidly bioaccumulate in the environment, food, wild animals and humans. In this review, we investigated the harmful effects of PBDEs on humans, especially in early life, and summarised the levels of PBDEs in human biological samples (breast milk, cord blood and placentas). In addition, we described the spatiotemporal distribution of PBDEs in this review. PBDE levels in breast milk, cord blood and placentas were generally higher in North America than in other regions, such as Asia, Europe, Oceania and Africa. However, high levels of PBDEs in human biological samples were detected at e-waste recycling sites in South China, East China and South Korea. This finding suggests that newborns living in e-waste regions are exposed to high levels of PBDEs during prenatal and postnatal periods. The time trends of PBDE concentration differed according to the region. Few studies have investigated PBDE levels in humans from 1967 to 2000, but they increased rapidly after 2000. PBDE concentration peaked at approximately 2006 globally. Compared with other PBDE congeners, BDE-47, BDE-153 and BDE-209 were the major components, but the detection rate of BDE-209 was lower than those of others. Future studies should focus on determining the BDE-209 concentration, which requires the implementation of different analytical approaches. Additionally, the levels of PBDEs in human samples and the environment should be monitored, especially in e-waste recycling regions.

Open image in new window

Graphical abstract The figures described the spatial distribution of the lowest (Fig. a1) and highest concentration of ∑PBDE (Fig. a2) in different countries by 2006 and described the spatial distribution of the lowest (Fig. b1) and highest concentration of ∑PBDE (Fig. b2) in different countries from 2007 to 2015. All the figures indicated that the levels of PBDEs in North America were substantially higher than those in many regions of Europe, Asia, Oceania, or Africa. Comparing Fig. a1–b1 or Fig. a2–b2, increasing trends were observed in some countries, especially in some regions in China, Korea and Canada.

     

Validation of temporal and spatial consistency of facility- and speed-specific vehicle-specific power distributions for emission estimation: A case study in Beijing,China

Vehicle-specific power (VSP) has been found to be highly correlated with vehicle emissions. It is used in many studies on emission modeling such as the MOVES (Motor Vehicle Emissions Simulator) model. The existing studies develop specific VSP distributions (or OpMode distribution in MOVES) for different road types and various average speeds to represent the vehicle operating modes on road. However, it is still not clear if the facility- and speed-specific VSP distributions are consistent temporally and spatially. For instance, is it necessary to update periodically the database of the VSP distributions in the emission model? Are the VSP distributions developed in the city central business district (CBD) area applicable to its suburb area? In this context, this study examined the temporal and spatial consistency of the facility- and speed-specific VSP distributions in Beijing. The VSP distributions in different years and in different areas are developed, based on real-world vehicle activity data. The root mean square error (RMSE) is employed to quantify the difference between the VSP distributions. The maximum differences of the VSP distributions between different years and between different areas are approximately 20% of that between different road types. The analysis of the carbon dioxide (CO₂) emission factor indicates that the temporal and spatial differences of the VSP distributions have no significant impact on vehicle emission estimation, with relative error of less than 3%.

Implications: The temporal and spatial differences have no significant impact on the development of the facility- and speed-specific VSP distributions for the vehicle emission estimation. The database of the specific VSP distributions in the VSP-based emission models can maintain in terms of time. Thus, it is unnecessary to update the database regularly, and it is reliable to use the history vehicle activity data to forecast the emissions in the future. In one city, the areas with less data can still develop accurate VSP distributions based on better data from other areas.     

电渗透脱水污泥干燥特性曲线及干燥模型

通过电渗透脱水技术及自然风干技术两种预处理方式降低污泥含水率,当污泥初始含水率相近时,研究经两种方式处理后污泥的干燥特性曲线,并对电渗透脱水污泥干燥特性曲线的优势情况进行探讨。在40—120℃的低温条件下,研究电渗透脱水污泥（泥饼厚度为3．5mm）的干燥特性曲线并分析其干燥特性。通过所得电渗透脱水污泥的干燥特性曲线,引人薄层污泥干燥模型进行数值分析。结果表明,在实验条件下,电渗透脱水污泥的干燥速率要优于自然风干污泥的干燥速率。随着温度的升高,电渗透脱水污泥的干燥速率随之升高,干燥到所需含水率的时间则随之减少。Logarithmic模型比其他模型更适合描述薄层电渗透脱水污泥在低温条件下的干燥特性。     

CuO/γ-Al2O3类Fenton试剂降解丁基黄药

CuO/γ-Al2O3类Fenton试剂是降解丁基黄药的优良试剂。该试剂与传统的Fenton试剂相比,提高了反应的pH值,可在较高pH(4~5)条件下反应,而传统的Fenton试剂的适宜pH值一般在3以下。采用单因素实验和正交实验相结合的方法研究了pH、催化剂投加量、过氧化氢投加量以及反应时间对丁基黄药降解效果的影响,并对催化剂的使用寿命进行了探讨。研究结果表明,反应的最佳条件为:pH为4~5,催化剂投加量为6 g/L,过氧化氢用量为30 mg/L,反应30min。在此反应条件下,丁基黄药的降解率达98%以上;影响丁基黄药降解效果的因素大小顺序为:pH>反应时间>H2O2用量>催化剂投加量,其中pH对CuO/γ-Al2O3类Fenton试剂降解丁基黄药的影响最为显著。     

重庆主城区秋冬季逆温对空气质量影响的观测分析

2013年9—11月利用RPG-HATPRO地基多通道微波辐射计对重庆主城区大气进行连续探测,统计了大气逆温情况,并对典型重污染天气下大气逆温与空气质量状况进行综合分析。结果表明,逆温出现的频率为63.3%,基本为接地逆温类型,逆温层厚度为953 m,逆温强度为0.3℃/hm;逆温的存在为气溶胶的积聚和凝聚创造了有利条件。     

Rubber and pulp plantations represent a double threat to Hainan's natural tropical forests

Hainan, the largest tropical island in China, belongs to the Indo-Burma biodiversity hotspot and harbors large areas of tropical forests, particularly in the uplands. The Changhua watershed is the cradle of Hainan's main river and a center of endemism for plants and birds. The watershed contains great habitat diversity and is an important conservation area. We analyzed the impact of rubber and pulp plantations on the distribution and area of tropical forest in the watershed, using remote sensing analysis of Landsat images from 1988, 1995 and 2005. From 1988 to 1995, natural forest increased in area (979-1040?sq?km) but decreased rapidly (763?sq?km) over the next decade. Rubber plantations increased steadily through the study period while pulp plantations appeared after 1995 but occupied 152?sq?km by 2005. Rubber and pulp plantations displace different types of natural forest and do not replace one another. Because pulp is not as profitable as rubber and existing pulp processing capacity greatly exceeds local supply, considerable pressure exists on remaining upland forests. We recommend for future management that these plantation forests be reclassified as 'industrial', making a clear policy distinction between natural and industrial forestry. Additionally, the local government should work to enforce existing laws preventing forest conversion on marginal and protected areas.     

苯胺-邻氨基酚共聚物对水中Hg(Ⅱ)吸附性能的研究

利用化学氧化法合成了苯胺-邻氨基苯酚的共聚物,并通过静态实验研究了材料对水中汞离子的吸附性能。研究结果表明,该共聚物对废水中汞离子有优异的去除效果,其吸附容量可达212.13 mg/g;吸附等温线符合Langmu ir单层吸附模型,动力学过程符合准二级动力学模型;溶液pH值对吸附影响不是很大,pH 5~10范围都有较好的吸附效果;氯离子易与汞离子形成水溶性更强的络合物,对共聚物的吸附有很大的抑制作用。     

脱硫石膏粒径分布与脱水性能实验研究

脱硫石膏粒径分布是影响脱硫石膏浆液脱水性能的重要因素之一,以干法、湿法筛分和研磨破碎获得不同粒径分布的脱硫石膏,在相同的过滤条件下,对不同粒径分布脱硫石膏浆液脱水性能进行了研究,实验结果表明,当脱硫石膏粒径d50大于50μm且（d90-d10）小于100μm,真空过滤最大真空度不低于0．098MPa,过滤时间不少于2．5min,滤饼厚度不超过20mm时,石膏滤饼含水率可以降低到12％以下（最低可达10％）;d50在17μm为脱硫石膏在相同的过滤条件下能够实现真空脱水干燥的转折点;d50和（d90-d10）共同影响石膏脱水性能,d50小于20μm时,仅表现为d50的影响。     

高速公路路面沉积物的污染特性

对湖南省长潭西高速公路不同采样点的路面沉积物进行取样分析,并检测了样品的颗粒级配、COD、重金属(Cu、Zn、Pb和Cd)和有机质。结果表明,路面沉积物主要以粒径<0.15 mm的颗粒为主;较小颗粒物中的COD含量高于较大颗粒中的COD含量;粒径在0.15 mm以下的颗粒物所含重金属Cu、Zn、Pb和Cd的浓度普遍高于所选的土壤标准值,降雨一旦形成径流将会产生严重的污染危害;沉积物中的有机质含量对重金属的吸附有一定的影响,有机质含量越高,沉积物中重金属含量相对也高。