Integrated Ambient and Microenvironment Model for Estimation of PM10 Exposures of Children in Annual and Episode Settings

Particulate matter air pollution is estimated to cause in the order of 350,000 excess deaths in the European Union calling for policy development and evaluation tools. In the current work, a model for PM₁₀ exposures of children is developed using microenvironment time activities and infiltration of ambient pollution indoors, both evaluated against observations earlier and integrated with city-wide air quality models in the current work. The model is demonstrated using data from two cities in Italy. High-end short-term exposures are characterized by an episode-day situation in Turin, and annual mean exposures in downtown Bologna. The air quality model was unable to capture the highest levels during the episode, and therefore, the exposure model was adjusted using observed–modeled ratio from a monitoring station. Air quality model performance for the annual levels was significantly better. Annual exposure variability within the target population was 1.5-fold in the downtown area Bologna and tenfold during the episode day in Turin.     

Hg<Superscript>2+</Superscript> detection using a disposable and miniaturized screen-printed electrode modified with nanocomposite carbon black and gold nanoparticles

A miniaturized screen-printed electrode (SPE) modified with a carbon black-gold nanoparticle (CBNP-AuNP) nanocomposite has been developed as an electrochemical sensor for the detection of inorganic mercury ions (Hg²⁺). The working electrode surface has been modified with nanocomposite constituted of CBNPs and AuNPs by an easy drop casting procedure that makes this approach extendible to an automatable mass production of modified SPEs. Square wave anodic stripping voltammetry (SWASV) was adopted to perform Hg²⁺ detection, revealing satisfactory sensitivity and detection limit, equal to 14 μA ppb^?1 cm^?2 and 3 ppb, respectively. The applicability of the CBNP-AuNP-SPE for the determination of inorganic mercury has been assessed in river water by a simple filtration and acidification of the sample as well as in soil by means of a facile acidic extraction procedure assisted by ultrasound.     

Climate change and crop diversity: farmers’ perceptions and adaptation on the Bolivian Altiplano

Crop diversity is central to traditional risk management practices on the Andean Altiplano and may find renewed importance in adapting to climate change. This study explored the role of crop diversity in farmers’ adaptation actions in eight Aymara communities on the northern Bolivian Altiplano. Using a combination of quantitative and qualitative methods, including multifactor analysis and a community resilience self-assessment, we investigated how farmers’ use of diversity in adaptation is related to their perceptions of crop and variety tolerances and other environmental, social, and economic factors. Few crops and varieties were perceived as tolerant to increasingly intense and unpredictable drought, frost, hail, and pest and disease outbreaks. Some local crops and varieties were perceived as vulnerable to emerging conditions (e.g. oca, papalisa, isaño), whereas bitter potatoes and wild relatives of quinoa and cañahua were perceived as highly stress tolerant and provide food in harsh periods. A total 19% of households surveyed (N = 193) had introduced new crops or varieties—often disease resistant or early maturing—as an adaptive action. Introduction of commercial crops was a common adaptation action, reflecting farmers’ response to warming temperatures and changing economic opportunities, but greater sensitivity of the introduced crops may cause maladaptation. Despite intensification of cropping systems, households continue to maintain a median four potato varieties with different tolerance traits, yet this risk management practice was not perceived as adaptation. Strengthening resilience will require a combination of actions, including maintaining and expanding crop portfolios and restoring soil and ecosystem health, using both traditional and innovative approaches.     

A Methodology for the Evaluation of Water Policies in European Countries

Periodic assessment of progress toward established policy goals is crucial to understanding whether the applied efforts are effective. In Europe, the Water Framework Directive (WFD) adopted in year 2000 set ambitious environmental objectives to be achieved by the end of 2015 through the implementation of Integrated Water Resources Management (IWRM) principles. While at this stage it is premature to measure the impact of this Directive in terms of environmental outcomes, it is nonetheless important to develop indicators in order to monitor whether water management practices throughout Europe are aligning towards IWRM. This article presents the methodological development of the Water and Wetland Index, a comparative water policy assessment by environmental NGOs that was carried out in 2002–2003, and highlights the interest of repeating it in 2015, when the first WFD planning cycle will be completed.     

Oxidative degradation of chlorophenol derivatives promoted by microwaves or power ultrasound: a mechanism investigation

Background, aim, and scope

Phenols are the most common pollutants in industrial wastewaters (particularly from oil refineries, resin manufacture, and coal processing). In the last two decades, it has become common knowledge that they can be effectively destroyed by nonconventional techniques such as power ultrasound (US) and/or microwave (MW) irradiation. Both techniques may strongly promote advanced oxidation processes (AOPs). The present study aimed to shed light on the effect and mechanism of US- and MW-promoted oxidative degradation of chlorophenols; 2,4-dichlorophenoxyacetic acid (2,4-D), a pesticide widespread in the environment, was chosen as the model compound.

Materials and methods

2,4-D degradation by AOPs was carried out either under US (20 and 300 kHz) in aqueous solutions (with and without the addition of Fenton reagent) or solvent-free under MW with sodium percarbonate (SPC). All these reactions were monitored by gas chromatography–mass spectrometry (GC–MS) analysis and compared with the classical Fenton reaction in water under magnetic stirring. The same set of treatments was also applied to 2,4-dichlorophenol (2,4-DCP) and phenol, the first two products that occur a step down in the degradation sequence. Fenton and Fenton-like reagents were employed at the lowest active concentration.

Results

The effects of US and MW irradiation were investigated and compared with those of conventional treatments. Detailed mechanisms of Fenton-type reactions were suggested for 2,4-D, 2,4-DCP, and phenol, underlining the principal degradation products identified. MW-promoted degradation under solvent-free conditions with solid Fenton-like reagents (viz. SPC) is extremely efficient and mainly follows pyrolytic pathways. Power US strongly accelerates the degradation of 2,4-D in water through a rapid generation of highly reactive radicals; it does not lead to the formation of more toxic dimers.

Discussion

We show that US and MW enhance the oxidative degradation of 2,4-D and that a considerable saving of oxidants and cutting down of reaction times is thereby achieved. The results support the interpretation of previously published data and improve the understanding of the factors of direct degradation along different pathways.

Conclusions

Oxidative pathways for 2,4-D, 2,4-DCP, and phenol were proposed by a careful monitoring of the reactions and detection of intermediates by GC–MS.

Recommendations and perspectives

The understanding of the factors that affect chlorophenols degradation along different pathways may facilitate the optimization of the treatment. Type of energy source (US or MW), power, and frequency to be applied could be designed in function of the operative scenario (amount of pollutant in soil, water, or oils).     

Experimental evaluation of PCDD/Fs and PCBs release and mass balance of a WTE plant

The behaviour of waste incineration plants with respect to organic toxic trace contaminants such as PCDDs, PCDFs and, to a minor extent, PCBs, is still a matter of concern for the public opinion and the decision makers. It is therefore very important, first, to evaluate the release of these organic toxic trace contaminants in the environment during waste incineration, not only through the stack gas emission but also with the solid and liquid residues, and then to compare the total release with the input through the treated waste in order to assess the plant behaviour as a “sink” rather than a “source” of organic toxic trace contaminants. The experimental investigation carried out on an Italian full scale incineration plant has shown a total 17 PCDD/Fs and 12 dioxin-like PCBs release of 5.5-27 μg WHO-TEQ per tonne of treated waste and an input flux of 1.6-44 μg WHO-TEQ per tonne of waste, with the difference between the input and the output fluxes rather small and the plant behaviour toward organic trace toxic contaminants in average neutral. Results are compared with similar evaluations conducted in the last decade on a number of waste-to-energy (WTE) plants operating in Italy.     

Influence of salinity and temperature on the activity of biosurfactants by polychaete-associated isolates

Influence of different parameters on biosurfactant (BS) activity was carried out on strains that were isolated from the polychaetes Megalomma claparedei, Sabella spallanzanii and Branchiomma luctuosum and additional 30 strains that were previously identified as potential BS producers from crude oil enrichments of the same polychaete specimens. The selection of BS-producing strains from polychaete natural samples was carried out by using standard screening tests. The BS activity by each isolate was evaluated for the effect of salinity and temperature on emulsion production and surface tension reduction, during incubation in mineral medium supplemented with tetradecane or diesel oil. All isolates showed a similar time course of BS activity, and the latter was more influenced by salinity rather than temperature. Some of the BS producers belonged to genera that have not (i.e. Citricoccus, Cellulophaga, Tenacibaculum and Maribacter) or have poorly been (Psychrobacter, Vibrio, and Pseudoalteromonas) reported as able to produce BSs. This is remarkable as some of them have previously been detected in hydrocarbon-enriched samples. Results confirm that filter-feeding polychaetes are an efficient source for the isolation of BS producers.     

Application of photocatalysis as a post treatment method of a heterotrophic-autotrophic denitrification reactor effluent

The aim of this study is the application of photocatalysis as an effective post treatment scheme for the removal of the organic matter and bacteria released by an innovative biological denitrification process referred to as heterotrophic-autotrophic denitrification, which combines heterotrophic and autotrophic denitrification processes. Photocatalytic treatment was applied using TiO2 as a photocatalyst in the loading range of 0.25-2.00 g l(-1) for irradiation periods up to 60 min using a black light fluorescent lamp with an intensity of I(0)=1309 microW cm(-2). The photocatalytic inactivation data were modelled to pseudo first order kinetics as well as by the areal rates to evaluate the photocatalyst loading effect. Chlorination was used as a final disinfection step to attain an overall inactivation of total coliforms as well as to the formation of very low level of trihalomethanes.